| Title | Authors | Year | SCOPUS | PUBMED | ISI | TCI | |
|---|---|---|---|---|---|---|---|
| 1. | A case study on functional polymer modification of cacao husk for enhanced removal of nitrate and phosphate from vinasse waste | Aini, N. Rahayu, A. Jamilatun, S. Mufandi, I. |
2024 | ||||
| 2. | Adaptive Virtual Inertia Control for Combined Heat Pump and Biogas Engine Generator System: An alternative solution for Grid-level energy storage | Jongudomkarn, J. Khunkitti, P. Siritaratiwat, A. |
2024 | ||||
| 3. | A decision support system based on an artificial multiple intelligence system for vegetable crop land allocation problem | Pitakaso, R. Sethanan, K. Tan, K.H. Kumar, A. |
2024 | ||||
| 4. | A hybridization of MODWT-SVR-DE model emphasizing on noise reduction and optimal parameter selection for prediction of CO |
Sujjaviriyasup, T. Pitiruek, K. |
2024 | ||||
| 5. | A method to improve binary forecast skill verification. | Sitthiyot, T Holasut, K |
2024 | ||||
| 6. | An adaptive differential evolution algorithm to solve the multi-compartment vehicle routing problem: A case of cold chain transportation problem | Sankul, S. Supattananon, N. Akararungruangkul, R. Wichapa, N. |
2024 | ||||
| 7. | Analyzing online public opinion on Thailand-China high-speed train and Laos-China railway mega-projects using advanced machine learning for sentiment analysis | Nokkaew, M. Nongpong, K. Yeophantong, T. Ploykitikoon, P. Arjharn, W. Siritaratiwat, A. Narkglom, S. Wongsinlatam, W. Remsungnen, T. Namvong, A. Surawanitkun, C. |
2024 | ||||
| 8. | An application of artificial intelligence for solving multi-visit scheduling and routing of multi-heterogeneous resources | Pitakaso, R. Sethanan, K. Kumar, A. Tan, K.H. Nanthasamroeng, N. |
2024 | ||||
| 9. | A need analysis of English proficiency in engineering graduates: perspectives of the world’s leading companies in Thailand | Sureeyatanapas, P. Srisawasdi, N. Sureeyatanapas, P. |
2024 | ||||
| 10. | Anomalous Current Steps in 3D Graphene Electrochemical Systems at Room Temperature | Srichan, C. Danvirutai, P. Tuantranont, A. |
2024 | ||||
| 11. | An open innovative inventory management based demand forecasting approach for the steel industry | Sukolkit, N. Arunyanart, S. Apichottanakul, A. |
2024 | ||||
| 12. | A Novel Asymmetric Hybrid-Layer Del-Shaped Rotor Interior Permanent Magnet Motor for Electric Vehicles | Suphama, M. Seangwong, P. Fernando, N. Jongudomkarn, J. Siritaratiwat, A. Khunkitti, P. |
2024 | ||||
| 13. | A novel double stator hybrid-excited Halbach permanent magnet flux-switching machine for EV/HEV traction applications. | Ning, S Seangwong, P Fernando, N Siritaratiwat, A Khunkitti, P |
2024 | ||||
| 14. | A Pilot–Scale Continuous Torrefier for Bagasse Quality Improvement in a Biomass Powerplant | Pajampa, K. Suksri, A. Wongwuttanasatian, T. |
2024 | ||||
| 15. | Application of Artificial Intelligence and Image Processing for the Cultivation of Chlorella sp. Using Tubular Photobioreactors | Tummawai, T. Rohitatisha Srinophakun, T. Padungthon, S. Sukpancharoen, S. |
2024 | ||||
| 16. | Application of ultra high-performance mortar for producing high-performance pervious concrete with low carbon emissions and cost | Tran, T.N.H. Kaur, H. Sukcharoen, T. Pulngern, T. Sata, V. Jaturapitakkul, C. Ban, C.C. Tangchirapat, W. |
2024 | ||||
| 17. | Applied machine learning: Performance prediction of heat pipe with mesh wick | Wansasueb, K. Promthaisong, P. Bubphachot, B. Pattiya, A. Chompookham, T. Rittidech, S. Siriwan, N. |
2024 | ||||
| 18. | Applying Deep Learning for Occluded Uterus and Fallopian Tube Detection for Laparoscopic Tubal Sterilization | Boonkong, A. Khampitak, K. Kaewfoongrungsi, P. Namkhun, S. Hormdee, D. |
2024 | ||||
| 19. | Artificial neural network infused quasi oppositional learning partial reinforcement algorithm for structural design optimization of vehicle suspension components | Sait, S.M. Mehta, P. Pholdee, N. Ylldlz, B.S. Ylldlz, A.R. |
2024 | ||||
| 20. | Assessing a Hierarchical Structure for Circular Supply Chain Management Performance: Improving Firms' Eco-Innovation and Technological Performance | Kurrahman, T. Tsai, F.M. Sethanan, K. Chen, C.C. |
2024 | ||||
| 21. | Assessing the impact of climate change on surface runoff of the Ubolratana Reservoir, Thailand | Suryani, N.S. Pawattana, C. Lohpaisankrit, W. Muangthong, S. |
2024 | ||||
| 22. | A supply chain finance risk management model for the electric vehicle supply chain: a data-driven analysis | Bui, T.D. Chan, F.T.S. Kumpimpa, T. Tan, K.H. Sethanan, K. |
2024 | ||||
| 23. | Automatic classification of spread‐F types in ionogram images using support vector machine and convolutional neural network | Benchawattananon, P. Siritaratiwat, A. Supnithi, P. Nishioka, M. Perwitasari, S. Suthisopapan, P. Kruesubthaworn, A. |
2024 | ||||
| 24. | A way towards zero-waste campaign and sustainability in sugar industries; filter cake valorisation as energy pellets | Pajampa, K. Laloon, K. |
2024 | ||||
| 25. | BEHAVIORAL CHARACTERISTICS AND FACTORS INFLUENCING RAILWAY CROSSING BEHAVIORS | Jantosut, P. Tankasem, P. Kaewwichian, P. Chaipanha, W. Kaewkluengklom, R. Promraksa, T. Kumphong, J. |
2024 | ||||
| 26. | Bilayer Scaffolds of PLLA/PCL/CAB Ternary Blend Films and Curcumin-Incorporated PLGA Electrospun Nanofibers: The Effects of Polymer Compositions and Solvents on Morphology and Molecular Interactions | Tuanchai, A. Iamphring, P. Suttaphakdee, P. Boupan, M. Mikule, J. Pérez Aguilera, J.P. Worajittiphon, P. Liu, Y. Ross, G.M. Kunc, S. Mikeš, P. Unno, M. Ross, S. |
2024 | ||||
| 27. | Biofuel production from pork fat | Puinta, C. Benjapiyaporn, C. Benjapiyaporn, J. Pannucharoenwong, N. Duanguppama, K. Echaroj, S. Rattanadecho, P. Panvichien, S. |
2024 | ||||
| 28. | Biomechanical analysis of posteromedial tibial plateau fracture fixation in fresh cadaveric bone. Biomechanical analysis of posteromedial tibial plateau fracture fixation in fresh cadaveric bone |
Twinprai, N. Twinprai, P. Sripaduangkul, S. Samrid, R. Nimpisut, N. Apinyankul, R. Laonapakul, T. Chindaprasirt, P. |
2024 | ||||
| 29. | Biopolymer electrolyte from banana powder-konjac glucomannan for zinc-ion batteries. | Chiaoprakobkij, N Okhawilai, M Kasemsiri, P Uyama, H |
2024 | ||||
| 30. | Broadband Graphene/TiO |
Supasai, W. Suwanarat, S. Wannaprapa, M. Chaisakul, P. Siritaratiwat, A. Srichan, C. Jutong, N. Narkglom, S. Surawanitkun, C. |
2024 | ||||
| 31. | CARBON-SILICA COMPOSITE AS ADSORBENT FOR REMOVAL OF CATIONIC DYE (METHYLENE BLUE) | Ngernyen, Y. Phoumixay, C. Mountivongsa, K. Knijnenburg, J.T.N. Budsaereechai, S. |
2024 | ||||
| 32. | Characteristics of bulletproof plate made from silkworm cocoon waste: Hybrid silkworm cocoon waste-reinforced epoxy/UHMWPE composite | Jarupong, J. Sasrimuang, S. Artnaseaw, A. |
2024 | ||||
| 33. | Characterization and performance evaluation of in-house ultrafiltration membrane coupled with photocatalysis for 17α-methyltestosterone hormone removal | Karnjanamit, N. Bootluck, W. Thammakhet-Buranachai, C. Lau, W.J. Jutaporn, P. Khongnakorn, W. |
2024 | ||||
| 34. | Characterization and performance evaluation of in-house ultrafiltration membrane coupled with photocatalysis for 17-methyltestosterone hormone removal. | Karnjanamit, N Bootluck, W Thammakhet-Buranachai, C Lau, WJ Jutaporn, P Khongnakorn, W |
2024 | ||||
| 35. | Chromium (VI) removal by magnetite nanoparticles immobilized with extracellular polymeric substances extracted from Lysinibacillus sp. WH. | Jungcharoen, P Mekhin, P Seelaphat, J Thongbai, P Ekprasert, J |
2024 | ||||
| 36. | Classification of Glaucoma Severity Stages Using Deep Learning | Uttakit, P. Hanpinitsak, P. Thanapaisal, S. Polpinit, P. |
2024 | ||||
| 37. | Comparative investigation of known and unknown disinfection by-product precursor removal and microbial community from biological biochar and activated carbon filters. Comparative investigation of known and unknown disinfection by-product precursor removal and microbial community from biological biochar and activated carbon filters |
Youngwilai, A. Khan, E. Phungsai, P. Therdkiattikul, N. |
2024 | ||||
| 38. | Comparative study of recent metaheuristics for solving a multiobjective transonic aeroelastic optimization of a composite wing | Wansasueb, K. Panagant, N. Bureerat, S. Sabangban, N. Pholdee, N. |
2024 | ||||
| 39. | Comparing data mining methods for predicting cost construction projects: A case study of cost management datasets from Thailand | Chaitongrat, T. Janthachai, K. Kusonkhum, W. Boonchai, P. Faisi Ikhwali, M. Khotdee, M. |
2024 | ||||
| 40. | Co-pyrolysis of biomass with magnesium and phosphorus: effect of magnesium content on phosphate release from biochar-based fertilizers | Knijnenburg, J.T.N. Kasemsiri, P. Kaewpradit, W. Tarinta, T. Jantapa, W. Jeejaila, T. Saengthip, C. Jetsrisuparb, K. |
2024 | ||||
| 41. | Data-driven natural capital accounting model in Indonesia: Impacts of environmentally related economic activities on ecological processes and services | Kurrahman, T. Tsai, F.M. Sethanan, K. Lim, M.K. |
2024 | ||||
| 42. | Design, development, and testing of a cassava storage root-cutting robot utilizing a Stewart platform and mask R-CNN for precision agriculture | Singhpoo, T. Wongpichet, S. |
2024 | ||||
| 43. | Designing a waxy maize shredder for animal feed | Lomchangkum, C. Junsiri, C. Sopha, P. Thongyothee, S. Doungpueng, K. |
2024 | ||||
| 44. | Design Optimization and Comparative Study of Skewed Halbach-Array Magnets TORUS Axial-Flux Permanent Magnet Motors for Electric Vehicles | Srikhumphun, P. Seangwong, P. Jongudomkarn, J. Siritaratiwat, A. Fernando, N. Somkun, S. Khunkitti, P. |
2024 | ||||
| 45. | Developing A Temporary External Fixator (TEF) For Mandibular Reconstruction Using Two-Phase QFD And TRIZ Approach | Chaiyachet, R. Boonma, A. Paipongna, T. |
2024 | ||||
| 46. | Development and Evaluation of a Wireless System for Remote Monitoring of Rumen Temperature in Dairy Cows | Sakphrom, S. Chaimool, S. |
2024 | ||||
| 47. | Development of green synthesised AgNPs decorated on MWCNT modified guar gum-based self-healing hydrogel for strain sensors | Khan, A. Nichakornpong, N. Wongsalam, T. Prathumrat, P. Likitaporn, C. Kasemsiri, P. |
2024 | ||||
| 48. | Digital system for dynamic container loading with neural network-based memory exploiting hybrid genetic algorithm for carbon reduction | Chien, C.F. Lan, Y.B. Sethanan, K. Peng, C.C. |
2024 | ||||
| 49. | Distinct comammox Nitrospira in high-rate down-flow hanging sponge reactor treating municipal wastewater. | Watari, T Kirishima, Y Choeisai, P Thepubon, T Hirakata, Y Matsueda, T Nagano, A Yamaguchi, T Okubo, T Hatamoto, M Yamaguchi, T |
2024 | ||||
| 50. | Effective measurement of starch and dry matter content in fresh cassava tubers using interactance Vis/NIR spectra | Malai, C. Maraphum, K. Saengprachatanarug, K. Wongpichet, S. Phuphaphud, A. Posom, J. |
2024 | ||||
| 51. | Effect of a narrow channel inserted in the conventional ice block mold with brine injection on the productivity and ice formation behavior of the low temperature brine bathing ice production process | Chinsuwan, A. Vaiyaphoch, P. |
2024 | ||||
| 52. | Effect of Combined Non-Wood and Wood Spectra of Biomass Chips on Rapid Prediction of Ultimate Analysis Parameters Using near Infrared Spectroscopy | Shrestha, B. Posom, J. Sirisomboon, P. |
2024 | ||||
| 53. | Effect of customized abutment taper configuration on bone remodeling and peri-implant tissue around implant-supported single crown: A 3D nonlinear finite element study | Poovarodom, P. Rungsiyakull, C. Suriyawanakul, J. Li, Q. |
2024 | ||||
| 54. | Effect of Environment Temperature and Relative Humidity on Thermal Emissivity: Study Case of Mango Fruit | Sirisomboon, P. Jongyingcharoen, J.S. Junto, A. Phanomsophon, T. Dachoupakan Sirisomboon, C. Rerngsamran, P. Pokhrel, D.R. Sharma, S. Posom, J. Pornchaloempong, P. Terdwongwarakul, A. Chongstitvatana, P. |
2024 | ||||
| 55. | Effect of heat treatment on microstructural characteristics and mechanical properties of hypereutectic B390 aluminium alloys modified by phosphorus and bismuth | Jiandon, P. Talangkun, S. Ponhan, K. |
2024 | ||||
| 56. | Effect of spraying time on mechanical and tribological performances of HVOF-sprayed WC–Co and WC–Cr |
Khuengpukheiw, R. Wisitsoraat, A. Saikaew, C. |
2024 | ||||
| 57. | Effect of triangular cross-sectional transverse wedge on the performance of an inline tube bundle heat exchanger | Yisunzam, P. Chinsuwan, A. |
2024 | ||||
| 58. | Efficient Route Optimization for Ice Distribution: Enhanced VRPTW with Customer Retention Strategies | Thammasang, S. Arunyanart, S. |
2024 | ||||
| 59. | Electro-peroxone process for triclocarban and triclosan removal and reclaimed water disinfection | Jenjaiwit, S. Siripattanakul-Ratpukdi, S. Khan, E. Prasopsuk, J. Ratpukdi, T. |
2024 | ||||
| 60. | Empowering Urban Public Transport Planning Process for Medium-Sized Cities in Developing Countries: Innovative Decision Support Framework for Sustainability | Faiboun, N. Klungboonkrong, P. Udomsri, R. Jaensirisak, S. |
2024 | ||||
| 61. | ENGINEERED BIOCHAR DERIVED FROM GRASS JELLY TREE WASTE | Chaiwong, C. Siphai, S. Budsaereechai, S. Knijnenburg, J.T.N. Ngernyen, Y. |
2024 | ||||
| 62. | Enhanced mechanical and self-healing properties of rice husk ash-incinerated sugarcane press mud biogeopolymer pastes Enhanced mechanical and self-healing properties of rice husk ash-incinerated sugarcane press mud biogeopolymer pastes. |
Techo, A Kaewpikul, D Sata, V Tanapongpisit, N Wongprasod, S Saenrang, W Chainakun, P Chindaprasirt, P Ekprasert, J |
2024 | ||||
| 63. | Enhanced photocatalytic degradation of diazinon using Ni:ZnO/Fe |
Salehzadeh, H. Wantala, K. Shahmoradi, B. Maleki, A. Suwannaruang, T. Shivaraju, H.P. Mohammadi, E. Ren, G. Jenkins, D.F. Choi, H.J. Safari, M. |
2024 | ||||
| 64. | Enhanced photoelectrochemical water splitting and photocatalytic decomposition performance of visible light active MgMnO |
Anusha, H.S. Jijoe, S.P. Tenzin, T. Divya, V. Anilkumar, K.M. Yashas, S.R. Sumana, K. Wantala, K. |
2024 | ||||
| 65. | Enhancing catalyst stability: Immobilization of Cu-Fe catalyst in sodium alginate matrix for methyl orange removal via Fenton-like reaction. | Kongkoed, P Lertna, N Athikaphan, P Neramittagapong, A Neramittagapong, S |
2024 | ||||
| 66. | Enhancing catalyst stability: Immobilization of Cu–Fe catalyst in sodium alginate matrix for methyl orange removal via Fenton-like reaction | Kongkoed, P. Lertna, N. Athikaphan, P. |
2024 | ||||
| 67. | Enhancing Green University Practices through Effective Waste Management Strategies | Phrophayak, J. Techarungruengsakul, R. Khotdee, M. Thuangchon, S. Ngamsert, R. Prasanchum, H. Sivanpheng, O. Kangrang, A. |
2024 | ||||
| 68. | Enhancing modulation performance by design of hybrid plasmonic optical modulator integrating multi-layer graphene and TiO |
Supasai, W. Siritaratiwat, A. Srichan, C. Suwanarat, S. Amorntep, N. Wannaprapa, M. Jutong, N. Chaisakul, P. Wiangwiset, T. Narkglom, S. Keokhoungning, T. Surawanitkun, C. |
2024 | ||||
| 69. | Enhancing Performance of Composite-Based Triboelectric Nanogenerators Through Laser Surface Patterning and Graphite Coating for Sustainable Energy Solutions | Amorntep, N. Siritaratiwat, A. Srichan, C. Sriphan, S. Wiangwiset, T. Ariyarit, A. Supasai, W. Bootthanu, N. Narkglom, S. Vittayakorn, N. Surawanitkun, C. |
2024 | ||||
| 70. | Enhancing the multifunctional properties of cellulose fabrics through in situ hydrothermal deposition of TiO |
Chokesawatanakit, N. Thammasang, S. Phanthanawiboon, S. Knijnenburg, J.T.N. Theerakulpisut, S. |
2024 | ||||
| 71. | Enhancing the Properties of Chitosan–Pectin Hydrogels With Cellulose Nanowhiskers for Potential Applications in Wound Dressings | Ferrante, M. Álvarez, V.A. Narain, R. Ounkaew, A. González, J.S. |
2024 | ||||
| 72. | Evaluation of Iron-Modified Biochar from Sugarcane Bagasse and Heterogeneous Fenton Process for Batik Dye Removal | Amelia, S. Jamilatun, S. Mufandi, I. Sriyana, I. Utami, M.W. |
2024 | ||||
| 73. | Experimental investigation of batteries thermal management system using water cooling and thermoelectric cooling techniques | Panmuang, P. Photong, C. Soemphol, C. |
2024 | ||||
| 74. | Extraction of Chitosan Derived from Mushroom by Deacetylation for Wastewater Treatment | Nanmong, T. Tanangteerapong, D. |
2024 | ||||
| 75. | Facile armour production from cocoon waste by a cold pressing process | Jarupong, J. Artnaseaw, A. |
2024 | ||||
| 76. | Factors affecting the biomass pellet using industrial eucalyptus bark residue | Laloon, K. Junsiri, C. Sanchumpu, P. Ansuree, P. |
2024 | ||||
| 77. | Factors influencing wrong way driving behavior of motorcycle riders in Thailand | Rasri, N. Satiennam, T. Satiennam, W. Sukkho, P. Jaensirisak, S. Kronprasert, N. Champahom, T. |
2024 | ||||
| 78. | Finding the sweet spot in Industry 4.0 transformation: an exploration of the drivers, challenges and readiness of the Thai sugar industry | Sureeyatanapas, P. Pancharoen, D. |
2024 | ||||
| 79. | Fixed-structure heading-autopilot controller design using meta-heuristics | Ruenruedeepan, N. Champasak, P. Panagant, N. Pholdee, N. Bureerat, S. |
2024 | ||||
| 80. | Geopolymer composites containing recycled plastics and waste glass | Sata, V. Wongsa, A. Ekprasert, J. Chindaprasirt, P. |
2024 | ||||
| 81. | Hidden emotional trends on social media regarding the Thailand–China high-speed railway project: a deep learning approach with ChatGPT integration | Nokkaew, M. Nongpong, K. Yeophantong, T. Ploykitikoon, P. Arjharn, W. Phonak, D. Siritaratiwat, A. Surawanitkun, C. |
2024 | ||||
| 82. | Highest endomorphisms of a Boolean lattice | Charoenpol, A. Chotwattakawanit, U. |
2024 | ||||
| 83. | Hybrid alkali-activated fly ash-Portland cement binders with modified polymer as patch repair | Detphan, S. Hanjitsuwan, S. Pangdaeng, S. Phoo-ngernkham, T. Damrongwiriyanupap, N. Wongsa, A. Sukontasukkul, P. |
2024 | ||||
| 84. | Impact of alkali impregnation on physicochemical properties of macro-scale sugarcane bagasse | Sirijuncheun, S. Seithtanabutara, V. Wantala, K. Wongwuttanasatian, T. |
2024 | ||||
| 85. | Implementation and Evaluation of a Uterine Manipulation System Incorporated with an Existing Tiltable-Tip Uterine Manipulator for Gynecological Laparoscopy | Namkhun, S. Khampitak, K. Boonkong, A. Hormdee, D. |
2024 | ||||
| 86. | Industrial data-driven modeling for imbalanced fault diagnosis | Lin, K.Y. Jamrus, T. |
2024 | ||||
| 87. | Influence of Duty Cycle on the Phosphorus Content and Hardness of the Ni-P Coatings Produced by Pulse-Current Electroplating | Wintachai, P. Kothanam, N. Harachai, K. Triroj, N. Jaroenapibal, P. |
2024 | ||||
| 88. | Influence of magnesium content and phosphoric acid treatment on cadmium adsorption onto sugarcane leaf biochar | Suwanree, S. | 2024 | ||||
| 89. | Integrated remediation and detoxification of triclocarban-contaminated water using waste-derived biochar-immobilized cells by long-term column experiments Integrated remediation and detoxification of triclocarban-contaminated water using waste-derived biochar-immobilized cells by long-term column experiments. |
Sonsuphab, K Toomsan, W Soontharo, S Supanchaiyamat, N Hunt, AJ Ngernyen, Y Nasompag, S Kiattisaksiri, P Ratpukdi, T Siripattanakul-Ratpukdi, S |
2024 | ||||
| 90. | Integrated Urban Transport and Land-Use Policies in Reducing CO |
Chindaprasirt, P. Klungboonkrong, P. Jaensirisak, S. Faiboun, N. Long, S. Tippichai, A. Taylor, M.A.P. |
2024 | ||||
| 91. | Integrating reinforcement learning and metaheuristics for safe and sustainable health tourist trip design problem | Pitakaso, R. Sethanan, K. Chien, C.F. Srichok, T. Khonjun, S. Nanthasamroeng, N. Gonwirat, S. |
2024 | ||||
| 92. | Kriging Surrogate-based Optimization for Shape Design of Thin Electric Propeller | Pholdee, N. Bureerat, S. Nuantong, W. Pongsatitpat, B. |
2024 | ||||
| 93. | Low-Cost Dual-Band Transparent Antenna for WLAN Communication Systems | Rakluea, C. Chaimool, S. Wongsin, N. Amonvatsirikul, W. Chandadaeng, A. Rakluea, P. |
2024 | ||||
| 94. | Low-Cost FR-4 Metasurface-Enhanced Microstrip Patch Antenna Array for Wideband 5G millimeter-Wave Applications | Chaimool, S. Prasert, N. Rakluea, C. |
2024 | ||||
| 95. | Low-Noise and High Linearity Potentiostat for Implantable Rumen pH Sensor Using Current Mirror Combined with Chopper Technique | Sakphrom, S. Limpiti, T. Chaimool, S. Kumsuwan, Y. |
2024 | ||||
| 96. | Low thermal oxidation of gaseous toluene over Cu/Ce single-doped and co-doped OMS-2 on different synthetic routes | Wantala, K. Chanlek, N. Kidkhunthod, P. |
2024 | ||||
| 97. | Magnetically separable BiZnO/Fe |
Salehzadeh, H. Shahmoradi, B. Maleki, A. Nikkhoo, B. Rahimi, B. Rezaee, M. Mohammadi, E. Shivaraju, H.P. Ren, G. Wantala, K. Choi, H.J. Safari, M. |
2024 | ||||
| 98. | Magnetic nanoparticles: An emerging nanomedicine for cancer immunotherapy | Jungcharoen, P. | 2024 | ||||
| 99. | Magnetite nanoparticles: an emerging adjunctive tool for the improvement of cancer immunotherapy. Magnetite nanoparticles: an emerging adjunctive tool for the improvement of cancer immunotherapy |
Jungcharoen, P. Thivakorakot, K. Thientanukij, N. Kosachunhanun, N. Vichapattana, C. |
2024 | ||||
| 100. | Mechanical and self-healing properties of cement paste containing incinerated sugarcane filter cake and Lysinibacillus sp. WH bacteria. | Ditta, ZM Laohana, P Tanapongpisit, N Saenrang, W Boonlue, S Sata, V Baalousha, M Chindaprasirt, P Ekprasert, J |
2024 | ||||
| 101. | Metaheuristic-assisted complex H-infinity flight control tuning for the Hawkeye unmanned aerial vehicle: A comparative study | Kanokmedhakul, Y. Bureerat, S. Panagant, N. Radpukdee, T. Pholdee, N. Yildiz, A.R. |
2024 | ||||
| 102. | Microwave assisted activation of silkworm excrement for fast adsorption of methylene blue and high performance supercapacitor. | Pimsawat, A Tangtrakarn, A Pimsawat, N Khamkongkaeo, A Daengsakul, S |
2024 | ||||
| 103. | Modification of melt-blown polypropylene filters with spent green tea-mediated green synthesis of nanosilver for antibacterial activities and air purification | Srikhao, N. Kasemsiri, P. Srichiangsa, N. Souvanh, M. Kidtang, S. Jarernboon, W. |
2024 | ||||
| 104. | Multi-depot and product vehicle routing problem with precedence constraint and selective backhauling in animal feed manufacturing industry | Sessomboon, P. Sethanan, K. Lim, M.K. Nitisiri, K. |
2024 | ||||
| 105. | Multi-objective optimization of custom implant abutment design for enhanced bone remodeling in single-crown implants using 3D finite element analysis. | Poovarodom, P Rungsiyakull, C Suriyawanakul, J Li, Q Sasaki, K Yoda, N Rungsiyakull, P |
2024 | ||||
| 106. | Mussel-Inspired Polymer-Based Coating Technology for Antifouling and Antibacterial Properties | Imbia, A.S. Ounkaew, A. Mao, X. Zeng, H. Liu, Y. Narain, R. |
2024 | ||||
| 107. | National yield reference for sugarcane management: Thailand case study | Wongkhunkaew, P. Konyai, S. Sriboonlue, V. |
2024 | ||||
| 108. | Near-Infrared Spectroscopy Modeling of Combustion Characteristics in Chip and Ground Biomass from Fast-Growing Trees and Agricultural Residue | Shrestha, B. Posom, J. Pornchaloempong, P. Sirisomboon, P. |
2024 | ||||
| 109. | NIR Spectroscopy as an Alternative to Thermogravimetric Analyzer for Biomass Proximate Analysis: Comparison of Chip and Ground Biomass Models | Shrestha, B. Posom, J. Sirisomboon, P. |
2024 | ||||
| 110. | Non-Invasive Sensors Integration for NCDs with AIoT Based Telemedicine System | Srichan, C. Danvirutai, P. Boonsim, N. |
2024 | ||||
| 111. | Nutrient retention and availability of biochars prepared by co-pyrolysis of vinasse with sugarcane filter cake | Suwanree, S. | 2024 | ||||
| 112. | Optimal condition design of cannabis drying for vacuum heat pump dryer using computational fluid dynamic method interaction with heat transfer | Pentamwa, C. Artnaseaw, A. Nabudda, K. |
2024 | ||||
| 113. | Optimal Placement and Capacity of BESS and PV in EV Integrated Distribution Systems: The Tenth Feeder of Phitsanulok Substation Case Study | Khunkitti, S. Pompern, N. Premrudeepreechacharn, S. Siritaratiwat, A. |
2024 | ||||
| 114. | Optimal Sizing and Location of Battery Energy Storage Systems in Distribution Systems connected with Distributed Generation using Salp Swarm Algorithm | Wichitkrailat, K. Premrudeepreechacharn, S. Khunkitti, S. Siritaratiwat, A. |
2024 | ||||
| 115. | Optimal Sizing and Locations of Multiple BESSs in Distribution Systems Using Crayfish Optimization Algorithm | Wichitkrailat, K. Premrudeepreechacharn, S. Siritaratiwat, A. Khunkitti, S. |
2024 | ||||
| 116. | Optimization Design of a V-shaped Flux Switching Permanent Magnet Traction motor for Railway Applications | Seangwong, P. Khunkitti, P. |
2024 | ||||
| 117. | Optimization-driven artificial intelligence-enhanced municipal waste classification system for disaster waste management | Pitakaso, R. Srichok, T. Khonjun, S. Golinska-Dawson, P. Sethanan, K. Nanthasamroeng, N. Gonwirat, S. Luesak, P. |
2024 | ||||
| 118. | Optimization of a tensile strength prediction model for compacted ribbons using NIR-HIS analysis | Wanfueangfu, J. Posom, J. Teerasukaporn, D. Supprung, P. Peerapattana, J. |
2024 | ||||
| 119. | Optimization of concrete containing waste crumb rubber mix design for thermal insulating applications using Taguchi method | Kantasiri, T. Kasemsiri, P. Pongsa, U. Posi, P. Chindaprasirt, P. |
2024 | ||||
| 120. | Optimization of Ru/ZSM-5 catalyst for selective d-glucose hydrogenation to sorbitol: A box-behnken design approach | Athikaphan, P. Jaitham, K. Saneaha, J. Nijpanich, S. |
2024 | ||||
| 121. | Optimization of vehicle conceptual design problems using an enhanced hunger games search algorithm | Mehta, P. Panagant, N. Wansasueb, K. Sait, S.M. Yildiz, A.R. Kumar, S. Yildiz, B.S. Hussien, A.G. |
2024 | ||||
| 122. | OPTIMIZED IMPACT RESISTANCE IN SEALED PLASTIC CUP LIDS THROUGH INTEGRATED FINITE ELEMENT ANALYSIS AND DROP TESTS | Janlasad, N. Tangchaichit, K. |
2024 | ||||
| 123. | Optimizing municipal solid waste collection vehicle routing with a priority on infectious waste in a mountainous city landscape context | Rattanawai, N. Arunyanart, S. Pathumnakul, S. |
2024 | ||||
| 124. | Optimizing sorbitol double dehydration: A Box-Behnken design approach with commercial sulfonic acid resin. | Lertna, N Sansawat, N Neramittagapong, A Theerakulpisut, S Neramittagapong, S |
2024 | ||||
| 125. | Optimizing vertically integrated pork production supply chain: A Lagrangian heuristic approach. Optimizing vertically integrated pork production supply chain: A Lagrangian heuristic approach |
Nakrachata-Amon, T. Vorasayan, J. Pitiruek, K. Arunyanart, S. Niyamosoth, T. Pathumnakul, S. |
2024 | ||||
| 126. | Performance and emission characteristics of the diesel engine fueled by Yang oleoresin blended diesel fuel | Benjapiyaporn, C. Katekaew, S. Senawong, K. |
2024 | ||||
| 127. | Performance assessment and comparison of online food delivery service providers based upon the aggregated perspectives of restaurant operators | Sureeyatanapas, P. Damapong, K. |
2024 | ||||
| 128. | Performance evaluation of facility locations using integrated DEA-based techniques Performance evaluation of facility locations using integrated DEA-based techniques. |
Arunyanart, S | 2024 | ||||
| 129. | Performance of polypropylene fiber-reinforced cellular lightweight fly ash geopolymer mortar under wet and dry cycles | Yoosuk, P. Suksiripattanapong, C. Hiroki, G. Phoo-ngernkham, T. Thumrongvut, J. Sukontasukkul, P. Chindaprasirt, P. |
2024 | ||||
| 130. | Predictive Energy Management for Microgrid Using Multi-Agent Deep Deterministic Policy Gradient With Random Sampling | Kaewdornhan, N. Chatthaworn, R. |
2024 | ||||
| 131. | Preparation and characterization of hydrothermally processed carbonaceous hydrochar from pulp and paper sludge waste | Phuthongkhao, P. Phasin, K. Boonma, P. Khunphonoi, R. Kanchanatip, E. Suwannaruang, T. Shivaraju, H.P. Wantala, K. |
2024 | ||||
| 132. | Probing the stability and quality of the cellulose-based Pickering emulsion containing sesamolin-enriched sesame oil by chemometrics-assisted ATR-FTIR spectroscopy. | Rosalina, R Kamwilaisak, K Sutthanut, K Srisongkram, T Weerapreeyakul, N |
2024 | ||||
| 133. | Quantifying fair income distribution in Thailand. | Sitthiyot, T Holasut, K |
2024 | ||||
| 134. | Real-Time Surgical Instrument Segmentation Analysis Using YOLOv8 With ByteTrack for Laparoscopic Surgery | Myo, N.N. Boonkong, A. Khampitak, K. Hormdee, D. |
2024 | ||||
| 135. | Recalibrated Correlations between Dynamic Cone Penetrometer (DCP) Data and California Bearing Ratio (CBR) in Subgrade Soil | Chokkerd, J. Udomchai, A. Sultornsanee, S. Angkawisittpan, N. Jantosut, P. Sangiamsak, N. Kaewhanam, N. |
2024 | ||||
| 136. | Red Light Running Behavior of Motorcyclists on Urban Roads: Psychological Factors and Risk Perception | Kumphong, J. Jantosut, P. Kaewkluengklom, R. Tankasem, P. Kaewhanam, N. Promraksa, T. |
2024 | ||||
| 137. | Restart performance of prolonged stopped down-flow hanging sponge reactor for treating of low-strength domestic sewage | Kirishima, Y. Watari, T. Terada, S. Choeisai, P. Choeisai, K. Nguyen, T.H. Okubo, T. Nagano, A. Matsueda, T. Hatamoto, M. |
2024 | ||||
| 138. | RF-DC conversion for RF energy harvesting from digital TV signals using voltage multiplier circuits | Panmuang, P. Sonsilphong, A. Soemphol, C. |
2024 | ||||
| 139. | Self-activation of carbons derived from bio-waste cabbage for a green supercapacitor based on seawater electrolyte | Phakkhawan, A. Sakulkalavek, A. Chanlek, N. Nijpanich, S. Ngernyen, Y. Buranurak, S. Pimanpang, S. |
2024 | ||||
| 140. | Strength and Durability Properties of Marginal Lateritic Soil-Bagasse Ash Based Geopolymer with Cement Supplements as Pavement Subbase Materials | Phojan, W. Jongphimai, D. Tiyasangthong, S. Thumrongvut, J. Wonglakorn, N. Kuasakul, T. Tabyang, W. Suksiripattanapong, C. |
2024 | ||||
| 141. | Strut‑and‑tie model including shear–flexure interaction for predicting shear capacity of reinforced concrete short coupling beams | Chetchotisak, P. Teerawong, J. Hansapinyo, C. |
2024 | ||||
| 142. | Tailoring visible-light active TiO/cellulose nanocomposites with controlled crystalline structure for enhanced photocatalytic performance. | Pimsawat, N Theerakulpisut, S Kamwilaisak, K |
2024 | ||||
| 143. | Tailoring visible-light active TiO |
Pimsawat, N. Theerakulpisut, S. Kamwilaisak, K. |
2024 | ||||
| 144. | Temperature-Responsive Injectable Composite Hydrogels Based on Poly(N-Isopropylacrylamide), Chitosan, and Hemp-Derived Cellulose Nanocrystals | Promdontree, P. Ounkaew, A. Yao, Y. Zeng, H. Narain, R. |
2024 | ||||
| 145. | Terminal Synergetic Control for Plate Heat Exchanger | Boonyaprapasorn, A. Simatrang, S. Kuntanapreeda, S. Ngiamsunthorn, P.S. Kumsaen, T. Sethaput, T. |
2024 | ||||
| 146. | Terminal Synergetic Controller for Car’s Active Suspension System Using Dragonfly Algorithm | Kumsaen, T. Simatrang, S. Boonyaprapasorn, A. Sethaput, T. |
2024 | ||||
| 147. | Terminal Synergetic Control with the Dragonfly Algorithm for Zoonotic Visceral Leishmaniasis Eradication | Kumsaen, T. Boonyaprapasorn, A. Chinviriyasit, S. Ngiamsunthorn, P.S. Sethaput, T. Maneewarn, T. Pengwang, E. |
2024 | ||||
| 148. | The adoption of machine learning algorithm for rust classification in steel structure | Srikaew, N. Srinavin, K. Chaitongrat, T. Aksorn, P. Kuntiyawichai, K. Pukird, T. |
2024 | ||||
| 149. | The analysis of marking reliability through the approach of gauge repeatability and reproducibility (GR&R) study: a case of English-speaking test | Sureeyatanapas, P. Sureeyatanapas, P. Panitanarak, U. Kraisriwattana, J. Sarootyanapat, P. O’Connell, D. |
2024 | ||||
| 150. | The determination of sarcopenia in older adults using a practical measure. | Chokphukiao, P Amatachaya, S Poncumhak, P Intaruk, R Thaweewannakij, T Somboonporn, C Peungsuwan, P Amatachaya, P Sooknuan, T |
2024 | ||||
| 151. | The Effects of the Grain Sizes and the Heat Spot Geometry on the Transition Jitter in HAMR Technology | Donchai, S. Otasai, A. Jongjaihan, C. Kaewrawang, A. |
2024 | ||||
| 152. | The feasibility study of the application of Big Data to predict delay situations in construction projects with daily report data | Srinavin, K. Kusonkhum, W. Kuntiyawichai, K. Hunchaisree, N. |
2024 | ||||
| 153. | The knowledge and holistic management indicators to measure the sustainability of area-based infrastructure project (AIP) The knowledge and holistic management indicators to measure the sustainability of area-based infrastructure project (AIP). |
Kuntiyawichai, K Aksorn, P |
2024 | ||||
| 154. | The multi-product vehicle routing problem with cross-docking: a novel strategy hybrid bat algorithm for Industry 3.5 in Thailand's food industry | Worasan, K. Sethanan, K. Moonsri, K. Golinska-Dawson, P. |
2024 | ||||
| 155. | Thermal management of photovoltaic module using affordable organic phase change material combined with nano metal oxide particles enhancer | Phukaokaew, W. Suksri, A. Punyawudho, K. |
2024 | ||||
| 156. | Thermoelectric materials for space explorations | Palaporn, D. Tanusilp, S.A. Sun, Y. |
2024 | ||||
| 157. | The Sustainable Development Goals for Education and Research in the Ranking of Green Universities of Mahasarakham University | Sribanasarn, W. Techarungruengsakul, R. Khotdee, M. Thuangchon, S. Ngamsert, R. Phumiphan, A. Sivanpheng, O. Kangrang, A. |
2024 | ||||
| 158. | Time-efficient low-resolution RGB aerial imaging for precision mapping of weed types in site-specific herbicide application | Panduangnat, L. Posom, J. Saikaew, K. |
2024 | ||||
| 159. | Trainable Pre-Processing Approach for Efficient Neural Network-based 4K-QAM Soft Demodulator | Triamwichanon, D. Muangkammuen, P. Suthisopapan, P. |
2024 | ||||
| 160. | UAV Wing Design via Efficient Global Optimization | Risanthia, A. Phiboon, T. Bureerat, S. Pichitkul, A. Tantrairatn, S. Ariyarit, A. |
2024 | ||||
| 161. | Understanding critical barriers to the adoption of blockchain technology in the logistics context: An interpretive structural modelling approach | Tangsakul, M. Sureeyatanapas, P. |
2024 | ||||
| 162. | Unraveling catalytic conversion of spent coffee grounds through alkaline and alkaline earth metal phosphates in hydrothermal carbonization | Nakason, K. Phanthuwongpakdee, J. Youngjan, S. Kraithong, W. Phanthasri, J. Toomsan, W. Kuboon, S. Faungnawakij, K. Panyapinyopol, B. Khemthong, P. |
2024 | ||||
| 163. | Unveiling Emotions and Themes in Thai Songs via Topic Modeling | Wanjantuk, P. Pinitkarn, N. Sengthavideth, S. Matthayomnan, J. Meesomboon, A. |
2024 | ||||
| 164. | Utilization of data and information flows for enhancing a chambermaid scheduling decision making in a smart hospitality supply chain | Pitakaso, R. Sethanan, K. Worasan, K. Golinska-Dawson, P. |
2024 | ||||
| 165. | Utilization of Plastic Waste in Fly Ash Geopolymer Concrete Containing Recycled Concrete Aggregate for Pavements | Wongkvanklom, A. Posi, P. Zaetang, Y. Wongsa, A. Pangdaeng, S. |
2024 | ||||
| 166. | Utilizing Explainable Artificial Intelligence (XAI) to Identify Determinants of Coffee Quality | Sermmany, K. Wanjantuk, P. Leelapatra, W. |
2024 | ||||
| 167. | XGBoost-SHAP and Unobserved Heterogeneity Modelling of Temporal Multivehicle Truck-Involved Crash Severity Patterns | Laphrom, W. Se, C. Champahom, T. Jomnonkwao, S. Wipulanusat, W. Satiennam, T. Ratanavaraha, V. |
2024 | ||||
| 168. | ZnCl |
Sangon, S. Kotebantao, K. Suyala, T. Ngernyen, Y. Hunt, A.J. Supanchaiyamat, N. |
2024 | Count | 153 | 23 | 0 | 0 |