| Title | Author | Year | SCOPUS | PUBMED | ISI | TCI | |
|---|---|---|---|---|---|---|---|
| 1. | Studies on charcoal block production from three charcoal types of biomass employing screw press unit | Laloon, K. Sudajan, S. Junsiri, C. |
2013 | ||||
| 2. | Effects of mixing ratio between eucalyptus bark charcoal and cassava starch on the performance of a charcoal block pressing unit | Laloon, K. Sudajan, S. |
2014 | ||||
| 3. | A STUDY ON SIZE REDUCTION OF EUCALYPTUS BARK FROM THE PROCESSING INDUSTRY FOR PRODUCING BIOMASS PELLETS | Pasawat Sanchumpu Kittipong Laloon Sakda Champana Chaiyan Junsiri |
2016 | ||||
| 4. | EFFECT OF MIXING RATIO AND PELLETING SPEED ON PHYSICAL AND MECHANICAL PROPERTIES OF BIOMASS PELLETS FROM SUGARCANE TRASH | Nirattisak Khongthon Chaiyun Junsiri Kittipong Laloon Sakda Champana Somposh Sudajan |
2016 | ||||
| 5. | Effect of moisture to shear strength trend of Khao Dok Mali 105 stems | Laloon, K. | 2019 | ||||
| 6. | Production of gasoline-like-fuel and diesel-like-fuel from hard-resin of Yang (Dipterocarpus alatus) using a fast pyrolysis process | Sudajan, S. Katekaew, S. Senawong, K. Laloon, K. |
2019 | ||||
| 7. | A study on the mechanical characteristics of cassava tuber cutter | Junsiri, C. Sudajan, S. Laloon, K. |
2020 | ||||
| 8. | Effect of gasoline-like fuel obtained from hard-resin of Yang (Dipterocarpus alatus) on single cylinder gasoline engine performance and exhaust emissions | Laloon, K. Katekaew, S. Senawong, K. Sudajan, S. |
2020 | ||||
| 9. | Influence of particle size on some physical and mechanical properties of pelletized sugarcane leaves | Ansuree, P. Sudajan, S. Thivavarnvongs, T. Junsiri, C. Laloon, K. Charee, S. |
2020 | ||||
| 10. | A study of cassava physical behavior for a design of cassava combine harvester | Junsiri, C. Sudajan, S. Laloon, K. |
2021 | ||||
| 11. | Effect of mixing speed and time on the homogeneity of multi-particle size sugarcane leaves product in horizontal paddle mixer for pelletized | Peeranat Ansuree Somposh Sudajan Chaiyan Junsiri Kittipong Laloon |
2021 | ||||
| 12. | Effects of moisture content and blade cutting speed on the chopping and size distribution of sugarcane leaves for the production of fuel biomass | Charee, S. Sudajan, S. Junsiri, C. Laloon, K. |
2021 | ||||
| 13. | Fuel Potential Values of Biomass Charcoal Powder | Phisamas Hwangdee Chaiyan Junsiri Somposh Sudajan Kittipong Laloon |
2021 | ||||
| 14. | Machine learning-based prediction of selected parameters of commercial biomass pellets using line scan near infrared-hyperspectral image | Lakkana Pitak Kittipong Laloon Seree Wongpichet Panmanas Sirisomboon Jetsada Posom |
2021 | ||||
| 15. | Optimization of performance and exhaust emissions of single-cylinder diesel engines fueled by blending diesel-like fuel from Yang-hard resin with waste cooking oil biodiesel via response surface methodology | Somporn Katekaew Chokchai Suiuay Kritsadang Senawong Varinrumpai Seithtanabutara Kemwat Intravised Kittipong Laloon |
2021 | ||||
| 16. | Physical Characteristics and Energy Content of Biomass Charcoal Powder | Phisamas Hwangdee Chaiyan Jansiri Somposh Sudajan Kittipong Laloon |
2021 | ||||
| 17. | Application of the Simplex-Centroid Mixture Design to Biomass Charcoal Powder Formulation Ratio for Biomass Charcoal Briquettes | Hwangdee, P. Charee, S. Junsiri, C. Laloon, K. |
2022 | ||||
| 18. | Factors affecting the biomass pellet using industrial eucalyptus bark residue. | Laloon, K Junsiri, C Sanchumpu, P Ansuree, P |
2022 | ||||
| 19. | Predicting the true density of commercial biomass pellets using near-infrared hyperspectral imaging | Pitak, L. Saengprachatanarug, K. Laloon, K. |
2022 | ||||
| 20. | Fuel Potential Values of Biomass Charcoal Powder | Junsiri, C. Sudajan, S. Laloon, K. |
2023 | ||||
| 21. | A way towards zero-waste campaign and sustainability in sugar industries; filter cake valorisation as energy pellets | Pajampa, K. Laloon, K. |
2024 | ||||
| 22. | Factors affecting the biomass pellet using industrial eucalyptus bark residue | Laloon, K. Junsiri, C. Sanchumpu, P. Ansuree, P. |
2024 | Count | 18 | 1 | 9 | 0 |
| Title | Authors | Year | Publication name | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | รวม | ||||||
| 1. | Studies on charcoal block production from three charcoal types of biomass employing screw press unit | Laloon, K. Sudajan, S. Junsiri, C. |
2013 |
Advanced Materials Research (690 693), pp. 1265-1274 |
||||||||
| 2. | Effects of mixing ratio between eucalyptus bark charcoal and cassava starch on the performance of a charcoal block pressing unit | Laloon, K. Sudajan, S. |
2014 |
Advanced Materials Research (931-932), pp. 1568-1573 |
||||||||
| 3. | Effect of moisture to shear strength trend of Khao Dok Mali 105 stems | Laloon, K. | 2019 |
IOP Conference Series: Earth and Environmental Science 1 (301), pp. |
||||||||
| 4. | Production of gasoline-like-fuel and diesel-like-fuel from hard-resin of Yang (Dipterocarpus alatus) using a fast pyrolysis process | Sudajan, S. Katekaew, S. Senawong, K. Laloon, K. |
2019 |
Energy (187), pp. |
||||||||
| 5. | A study on the mechanical characteristics of cassava tuber cutter | Junsiri, C. Sudajan, S. Laloon, K. |
2020 |
International Journal of Agricultural Technology 1 (16), pp. 63-76 |
||||||||
| 6. | Effect of gasoline-like fuel obtained from hard-resin of Yang (Dipterocarpus alatus) on single cylinder gasoline engine performance and exhaust emissions | Laloon, K. Katekaew, S. Senawong, K. Sudajan, S. |
2020 |
Renewable Energy (153), pp. 634-645 |
||||||||
| 7. | Influence of particle size on some physical and mechanical properties of pelletized sugarcane leaves | Ansuree, P. Sudajan, S. Thivavarnvongs, T. Junsiri, C. Laloon, K. Charee, S. |
2020 |
International Agricultural Engineering Journal 4 (29), pp. 358-368 |
||||||||
| 8. | A study of cassava physical behavior for a design of cassava combine harvester | Junsiri, C. Sudajan, S. Laloon, K. |
2021 |
Asia-Pacific Journal of Science and Technology 1 (26), pp. |
||||||||
| 9. | Effect of mixing speed and time on the homogeneity of multi-particle size sugarcane leaves product in horizontal paddle mixer for pelletized | Ansuree, P. Sudajan, S. Junsiri, C. Laloon, K. |
2021 |
Bulgarian Journal of Agricultural Science 5 (27), pp. 1009-1019 |
||||||||
| 10. | Effects of moisture content and blade cutting speed on the chopping and size distribution of sugarcane leaves for the production of fuel biomass | Charee, S. Sudajan, S. Junsiri, C. Laloon, K. |
2021 |
Agricultural Engineering International: CIGR Journal 2 (23), pp. 152-161 |
||||||||
| 11. | Machine learning-based prediction of selected parameters of commercial biomass pellets using line scan near infrared-hyperspectral image | Laloon, K. Wongpichet, S. Posom, J. |
2021 |
Processes 2 (9), pp. 1-15 |
||||||||
| 12. | Optimization of performance and exhaust emissions of single-cylinder diesel engines fueled by blending diesel-like fuel from Yang-hard resin with waste cooking oil biodiesel via response surface methodology | Katekaew, S. Suiuay, C. Senawong, K. Seithtanabutara, V. Intravised, K. Laloon, K. |
2021 |
Fuel (304), pp. |
||||||||
| 13. | Physical Characteristics and Energy Content of Biomass Charcoal Powder | Sudajan, S. Laloon, K. |
2021 |
International Journal of Renewable Energy Research 1 (11), pp. 158-169 |
||||||||
| 14. | Application of the Simplex-Centroid Mixture Design to Biomass Charcoal Powder Formulation Ratio for Biomass Charcoal Briquettes | Hwangdee, P. Charee, S. Junsiri, C. Laloon, K. |
2022 |
Sustainability (Switzerland) 7 (14), pp. |
||||||||
| 15. | Predicting the true density of commercial biomass pellets using near-infrared hyperspectral imaging | Pitak, L. Saengprachatanarug, K. Laloon, K. |
2022 |
Artificial Intelligence in Agriculture (6), pp. 266-275 |
||||||||
| 16. | Fuel Potential Values of Biomass Charcoal Powder | Junsiri, C. Sudajan, S. Laloon, K. |
2023 |
Biomass Conversion and Biorefinery 7 (13), pp. 5721-5730 |
||||||||
| 17. | A way towards zero-waste campaign and sustainability in sugar industries; filter cake valorisation as energy pellets | Pajampa, K. Laloon, K. |
2024 |
Ain Shams Engineering Journal 3 (15), pp. |
||||||||
| 18. | Factors affecting the biomass pellet using industrial eucalyptus bark residue | Laloon, K. Junsiri, C. Sanchumpu, P. Ansuree, P. |
2024 |
Biomass Conversion and Biorefinery 9 (14), pp. 10101-10113 |
||||||||
| Title | Authors | Year | Journal title | ||
|---|---|---|---|---|---|
| 1. | Factors affecting the biomass pellet using industrial eucalyptus bark residue. | Laloon, K Junsiri, C Sanchumpu, P Ansuree, P |
2022 |
Biomass conversion and biorefinery (), pp. 1-13 |
| Title | Authors | Year | Journal title | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | รวม | ||||||
| 1. | A STUDY ON SIZE REDUCTION OF EUCALYPTUS BARK FROM THE PROCESSING INDUSTRY FOR PRODUCING BIOMASS PELLETS | Pasawat Sanchumpu Kittipong Laloon Sakda Champana Chaiyan Junsiri |
2016 |
INTERNATIONAL JOURNAL OF TECHNOLOGY 7.0 (7.0), pp. 1222.0-1231.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 2. | EFFECT OF MIXING RATIO AND PELLETING SPEED ON PHYSICAL AND MECHANICAL PROPERTIES OF BIOMASS PELLETS FROM SUGARCANE TRASH | Nirattisak Khongthon Chaiyun Junsiri Kittipong Laloon Sakda Champana Somposh Sudajan |
2016 |
INTERNATIONAL JOURNAL OF TECHNOLOGY 7.0 (7.0), pp. 1260.0-1268.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 3. | Production of gasoline-like-fuel and diesel-like-fuel from hard-resin of Yang (Dipterocarpus alatus) using a fast pyrolysis process | Chokchai Suivay Somposh Sudajan Somporn Katekaew Kritsadang Senawong Kittipong Laloon |
2019 |
ENERGY (187.0), pp. |
13 | 0 | 0 | 0 | 0 | 0 | 13 | |
| 4. | Effect of gasoline-like fuel obtained from hard-resin of Yang (Dipterocarpus alatus) on single cylinder gasoline engine performance and exhaust emissions | Chokchai Suiuay Kittipong Laloon Somporn Katekaew Kritsadang Senawong Phakamat Noisuwan Somposh Sudajan |
2020 |
RENEWABLE ENERGY (153.0), pp. 634.0-645.0 |
6 | 0 | 0 | 0 | 0 | 0 | 6 | |
| 5. | Effect of mixing speed and time on the homogeneity of multi-particle size sugarcane leaves product in horizontal paddle mixer for pelletized | Peeranat Ansuree Somposh Sudajan Chaiyan Junsiri Kittipong Laloon |
2021 |
BULGARIAN JOURNAL OF AGRICULTURAL SCIENCE 5.0 (27.0), pp. 1009.0-1019.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 6. | Fuel Potential Values of Biomass Charcoal Powder | Phisamas Hwangdee Chaiyan Junsiri Somposh Sudajan Kittipong Laloon |
2021 |
BIOMASS CONVERSION AND BIOREFINERY (), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 7. | Machine Learning-Based Prediction of Selected Parameters of Commercial Biomass Pellets Using Line Scan Near Infrared-Hyperspectral Image | Lakkana Pitak Kittipong Laloon Seree Wongpichet Panmanas Sirisomboon Jetsada Posom |
2021 |
PROCESSES 2.0 (9.0), pp. |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
| 8. | Optimization of performance and exhaust emissions of single-cylinder diesel engines fueled by blending diesel-like fuel from Yang-hard resin with waste cooking oil biodiesel via response surface methodology | Somporn Katekaew Chokchai Suiuay Kritsadang Senawong Varinrumpai Seithtanabutara Kemwat Intravised Kittipong Laloon |
2021 |
FUEL (304.0), pp. |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
| 9. | Physical Characteristics and Energy Content of Biomass Charcoal Powder | Phisamas Hwangdee Chaiyan Jansiri Somposh Sudajan Kittipong Laloon |
2021 |
INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH 1.0 (11.0), pp. 158.0-169.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| Title | Authors | Year | Journal title |
|---|
| ชื่อโครงการ | Authors | ประเภทโครงการ | ปีงบประมาณ | ทุนวิจับ |
|---|