| Title | Author | Year | SCOPUS | PUBMED | ISI | TCI | |
|---|---|---|---|---|---|---|---|
| 1. | Empirical model for predicting cross-sectional averaged suspension density in commercial circulating fluidised bed boilers | Chinsuwan, A. | 2008 | ||||
| 2. | An experimental investigation of the effect of longitudinal fin orientation on heat transfer in membrane water wall tubes in a circulating fluidized bed | Anusorn Chinsuwan Animesh Dutta |
2009 | ||||
| 3. | An investigation of the heat transfer behavior of longitudinal finned membrane water wall tubes in circulating fluidized bed boilers | Anusorn Chinsuwan Animesh Dutta |
2009 | ||||
| 4. | Investigation of the temperature distribution and material limits of membrane water wall tubes of circulating fluidized bed boilers | Anusorn Chinsuwan Animesh Dutta |
2010 | ||||
| 5. | Cross sectional suspension density along the height of a CFB riser under fixed and variable bed inventory conditions | Somjun, J. Chinsuwan, A. |
2012 | ||||
| 6. | Prediction of the heat flux profile on the furnace wall of circulating fluidized bed boilers | Anusorn Chinsuwan Animesh Dutta Nadnalin Janlasad |
2014 | ||||
| 7. | The effect of blend ratio on thermal behavior and ash compositions of coal/bark co-combustion | Laongnual, T. Chinsuwan, A. |
2015 | ||||
| 8. | Effects of feed water temperature, pool temperature, and pool side heat transfer coefficient on freezing time of the conventional block ice production | Piyabud Sukborom Anusorn Chinsuwan |
2017 | ||||
| 9. | Heat transfer on wedged membrane fin water wall tubes of CFB boilers | Somjun, J. Chinsuwan, A. |
2017 | ||||
| 10. | An Investigation of Characteristics of a Loop Seal with and without Side Aeration | Chinsuwan, A. | 2018 | ||||
| 11. | Effect of transverse rib on heat transfer between circulating fluidized bed and membrane fins of water wall membrane tubes | Somjun, J. Chinsuwan, A. |
2018 | ||||
| 12. | An investigation of performance of a horizontal agitator gasification reactor | Pathompong Ponangrong Anusorn Chinsuwan |
2019 | ||||
| 13. | An optimization of the components and operating conditions of a pre-cooling system for tubular ice making machines | Acharaporn Thongdee Anusorn Chinsuwan |
2019 | ||||
| 14. | An investigation of performance of a conventional U type loop-seal for CFB reactors with side and bottom aerations | Anusorn Chinsuwan Jiraroch Somjun |
2020 | ||||
| 15. | Heat transfer behavior of the immersed tubes and solid circulation rate of a conventional U type loop-seal with an in-line tube bundle in the recycle chamber with and without side aeration at the walls | Chinsuwan, A. | 2020 | ||||
| 16. | A mathematical model for predicting the flow behavior through a CFB reactor U type loop - seal | Chinsuwan, A. | 2021 | ||||
| 17. | Effect of transverse triangular cross-sectional wedges on the asymptotic fouling deposition behavior of the flow through an inline tube bundle | Pasada Yisunzam Anusorn Chinsuwan |
2021 | ||||
| 18. | Effect of transverse triangular wedges on the behavior of the ash deposition and heat transfer of an inline tube bundle | Chinsuwan, A. | 2021 | ||||
| 19. | An optimization of a pre-cooling system for batch processes: A case study of the tubular ice production process | Chinsuwan, A. Yartprom, P. Yisunzam, P. Somjun, J. |
2023 | ||||
| 20. | Sensible heat recovery systems for batch processes with waste heat fluid drained at the end of the process | Chinsuwan, A. Chantamuang, S. Somjun, J. Yisunzam, P. |
2023 | ||||
| 21. | Effect of a narrow channel inserted in the conventional ice block mold with brine injection on the productivity and ice formation behavior of the low temperature brine bathing ice production process | Chinsuwan, A. Vaiyaphoch, P. |
2024 | ||||
| 22. | Effect of triangular cross-sectional transverse wedge on the performance of an inline tube bundle heat exchanger | Yisunzam, P. Chinsuwan, A. |
2024 | Count | 22 | 0 | 13 | 0 |
| Title | Authors | Year | Publication name | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | รวม | ||||||
| 1. | Empirical model for predicting cross-sectional averaged suspension density in commercial circulating fluidised bed boilers | Chinsuwan, A. | 2008 |
Journal of the Energy Institute 2 (81), pp. 69-75 |
||||||||
| 2. | An experimental investigation of the effect of longitudinal fin orientation on heat transfer in membrane water wall tubes in a circulating fluidized bed | Chinsuwan, A. | 2009 |
International Journal of Heat and Mass Transfer 5-6 (52), pp. 1552-1560 |
||||||||
| 3. | An investigation of the heat transfer behavior of longitudinal finned membrane water wall tubes in circulating fluidized bed boilers | Chinsuwan, A. | 2009 |
Powder Technology 2 (193), pp. 187-194 |
||||||||
| 4. | Investigation of the temperature distribution and material limits of membrane water wall tubes of circulating fluidized bed boilers | Chinsuwan, A. | 2010 |
Canadian Journal of Chemical Engineering 2 (88), pp. 144-152 |
||||||||
| 5. | Cross sectional suspension density along the height of a CFB riser under fixed and variable bed inventory conditions | Somjun, J. Chinsuwan, A. |
2012 |
Advanced Materials Research (361-363), pp. 1882-1886 |
||||||||
| 6. | Prediction of the heat flux profile on the furnace wall of circulating fluidized bed boilers | Chinsuwan, A. Janlasad, N. |
2014 |
Journal of the Energy Institute 4 (87), pp. 314-320 |
||||||||
| 7. | The effect of blend ratio on thermal behavior and ash compositions of coal/bark co-combustion | Laongnual, T. Chinsuwan, A. |
2015 |
ARPN Journal of Engineering and Applied Sciences 15 (10), pp. 6491-6495 |
||||||||
| 8. | Effects of feed water temperature, pool temperature, and pool side heat transfer coefficient on freezing time of the conventional block ice production | Chinsuwan, A. | 2017 |
Energy Procedia (138), pp. 63-68 |
||||||||
| 9. | Heat transfer on wedged membrane fin water wall tubes of CFB boilers | Somjun, J. Chinsuwan, A. |
2017 |
Energy Procedia (138), pp. 56-62 |
||||||||
| 10. | An Investigation of Characteristics of a Loop Seal with and without Side Aeration | Chinsuwan, A. | 2018 |
2018 2nd International Conference on Engineering Innovation, ICEI 2018 (), pp. 117-120 |
||||||||
| 11. | Effect of transverse rib on heat transfer between circulating fluidized bed and membrane fins of water wall membrane tubes | Somjun, J. Chinsuwan, A. |
2018 |
Powder Technology (332), pp. 178-187 |
||||||||
| 12. | An investigation of performance of a horizontal agitator gasification reactor | Chinsuwan, A. | 2019 |
Energy Procedia (157), pp. 683-690 |
||||||||
| 13. | An optimization of the components and operating conditions of a pre-cooling system for tubular ice making machines | Chinsuwan, A. | 2019 |
Energy Procedia (157), pp. 602-610 |
||||||||
| 14. | An investigation of performance of a conventional U type loop-seal for CFB reactors with side and bottom aerations | Chinsuwan, A. Somjun, J. |
2020 |
Chemical Engineering Research and Design (163), pp. 58-66 |
||||||||
| 15. | Heat transfer behavior of the immersed tubes and solid circulation rate of a conventional U type loop-seal with an in-line tube bundle in the recycle chamber with and without side aeration at the walls | Chinsuwan, A. | 2020 |
Powder Technology (369), pp. 114-126 |
||||||||
| 16. | A mathematical model for predicting the flow behavior through a CFB reactor U type loop - seal | Chinsuwan, A. | 2021 |
International Journal of Heat and Mass Transfer (177), pp. |
||||||||
| 17. | Effect of transverse triangular cross-sectional wedges on the asymptotic fouling deposition behavior of the flow through an inline tube bundle | Chinsuwan, A. | 2021 |
International Journal of Heat and Mass Transfer (166), pp. |
||||||||
| 18. | Effect of transverse triangular wedges on the behavior of the ash deposition and heat transfer of an inline tube bundle | Chinsuwan, A. | 2021 |
International Journal of Heat and Mass Transfer (172), pp. |
||||||||
| 19. | An optimization of a pre-cooling system for batch processes: A case study of the tubular ice production process | Chinsuwan, A. Yartprom, P. Yisunzam, P. Somjun, J. |
2023 |
Case Studies in Thermal Engineering (50), pp. |
||||||||
| 20. | Sensible heat recovery systems for batch processes with waste heat fluid drained at the end of the process | Chinsuwan, A. Chantamuang, S. Somjun, J. Yisunzam, P. |
2023 |
Case Studies in Thermal Engineering (50), pp. |
||||||||
| 21. | Effect of a narrow channel inserted in the conventional ice block mold with brine injection on the productivity and ice formation behavior of the low temperature brine bathing ice production process | Chinsuwan, A. Vaiyaphoch, P. |
2024 |
International Journal of Green Energy 2 (21), pp. 387-398 |
||||||||
| 22. | Effect of triangular cross-sectional transverse wedge on the performance of an inline tube bundle heat exchanger | Yisunzam, P. Chinsuwan, A. |
2024 |
Experimental Heat Transfer 6 (37), pp. 578-592 |
||||||||
| Title | Authors | Year | Journal title |
|---|
| Title | Authors | Year | Journal title | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | รวม | ||||||
| 1. | An experimental investigation of the effect of longitudinal fin orientation on heat transfer in membrane water wall tubes in a circulating fluidized bed | Anusorn Chinsuwan Animesh Dutta |
2009 |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 5-6 (52.0), pp. 1552.0-1560.0 |
9 | 0 | 0 | 0 | 0 | 0 | 9 | |
| 2. | An investigation of the heat transfer behavior of longitudinal finned membrane water wall tubes in circulating fluidized bed boilers | Anusorn Chinsuwan Animesh Dutta |
2009 |
POWDER TECHNOLOGY 2.0 (193.0), pp. 187.0-194.0 |
18 | 0 | 0 | 0 | 0 | 0 | 18 | |
| 3. | INVESTIGATION OF THE TEMPERATURE DISTRIBUTION AND MATERIAL LIMITS OF MEMBRANE WATER WALL TUBES OF CIRCULATING FLUIDIZED BED BOILERS | Anusorn Chinsuwan Animesh Dutta |
2010 |
CANADIAN JOURNAL OF CHEMICAL ENGINEERING 2.0 (88.0), pp. 144.0-152.0 |
3 | 0 | 0 | 0 | 0 | 0 | 3 | |
| 4. | Prediction of the heat flux profile on the furnace wall of circulating fluidized bed boilers | Anusorn Chinsuwan Animesh Dutta Nadnalin Janlasad |
2014 |
JOURNAL OF THE ENERGY INSTITUTE 4.0 (87.0), pp. 314.0-320.0 |
12 | 0 | 0 | 0 | 0 | 0 | 12 | |
| 5. | Effects of feed water temperature, pool temperature, and pool side heat transfer coefficient on freezing time of the conventional block ice production | Piyabud Sukborom Anusorn Chinsuwan |
2017 |
2017 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES (138.0), pp. 63.0-68.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 6. | Effect of transverse rib on heat transfer between circulating fluidized bed and membrane fins of water wall membrane tubes | Jiraroch Somjun Anusorn Chinsuwan |
2018 |
POWDER TECHNOLOGY (332.0), pp. 178.0-187.0 |
6 | 0 | 0 | 0 | 0 | 0 | 6 | |
| 7. | An investigation of performance of a horizontal agitator gasification reactor | Pathompong Ponangrong Anusorn Chinsuwan |
2019 |
TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY (TMREES) (157.0), pp. 683.0-690.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 8. | An optimization of the components and operating conditions of a pre-cooling system for tubular ice making machines | Acharaporn Thongdee Anusorn Chinsuwan |
2019 |
TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY (TMREES) (157.0), pp. 602.0-610.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 9. | An investigation of performance of a conventional U type loop-seal for CFB reactors with side and bottom aerations | Anusorn Chinsuwan Jiraroch Somjun |
2020 |
CHEMICAL ENGINEERING RESEARCH & DESIGN (163.0), pp. 58.0-66.0 |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
| 10. | Heat transfer behavior of the immersed tubes and solid circulation rate of a conventional U type loop-seal with an in-line tube bundle in the recycle chamber with and without side aeration at the walls | Atipong Armatsombat Anusorn Chinsuwan |
2020 |
POWDER TECHNOLOGY (369.0), pp. 114.0-126.0 |
4 | 0 | 0 | 0 | 0 | 0 | 4 | |
| 11. | A mathematical model for predicting the flow behavior through a CFB reactor U type loop - seal | Anusorn Chinsuwan | 2021 |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (177.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 12. | Effect of transverse triangular cross-sectional wedges on the asymptotic fouling deposition behavior of the flow through an inline tube bundle | Pasada Yisunzam Anusorn Chinsuwan |
2021 |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (166.0), pp. |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
| 13. | Effect of transverse triangular wedges on the behavior of the ash deposition and heat transfer of an inline tube bundle | Anusorn Chinsuwan Pasada Yisunzam |
2021 |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (172.0), pp. |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
| Title | Authors | Year | Journal title |
|---|
| ชื่อโครงการ | Authors | ประเภทโครงการ | ปีงบประมาณ | ทุนวิจับ |
|---|