| Title | Author | Year | SCOPUS | PUBMED | ISI | TCI | |
|---|---|---|---|---|---|---|---|
| 1. | A proposed approach for evaluating the industrial problem ranking in cleaner technology practices | Saikaew, C. | 2005 | ||||
| 2. | Cleaner technology concept applied to material reduction in an engineering course | Saikaew, C. Chillapat, N. |
2006 | ||||
| 3. | Statistically designed experiments for process improvement: A case study in concrete fence manufacturing | Saikaew, C. | 2007 | ||||
| 4. | Effect of carbon doping on gas sensing properties of molybdenum oxide nanoneedles | Saikaew, C. | 2009 | ||||
| 5. | Quality improvement of recycled plastic products using mixture experiment | Saikaew, C. Sripaya, P. |
2009 | ||||
| 6. | Using designed experiments to improve the quality of concrete products | Saikaew, C. | 2009 | ||||
| 7. | Optimization of carbon doped molybdenum oxide thin film coating process using designed experiments | Saikaew, C. Sootticoon, R. |
2010 | ||||
| 8. | Optimization of molding sand composition for quality improvement of iron castings | Saikaew, C. | 2012 | ||||
| 9. | การพัฒนาและปรับปรุงคุณภาพในอุตสาหกรรมการกัดขึ้นรูปแม่พิมพ์ด้วยการออกแบบการทดลอง (Quality Development and Improvement in Mold Making Industry with Designed Experiments) | ปรเมศวร์ เบ้าวรรณ ชาญณรงค์ สายแก้ว |
2013 | ||||
| 10. | A comparative study on the hardness of CrN, CrC and CrCN coatings | Khanchaiyaphum, S. Saikaew, C. Srisattayakul, P. Intanon, N. |
2014 | ||||
| 11. | Application of Shainin design of experiment method on metal turning operation | Saikaew, C. Chanapal, C. Phrachai, T. |
2014 | ||||
| 12. | Design and fabrication of wear testing machine for a fishing net- weaving machine component | Intanon, N. Saikaew, C. Srisattayakul, P. |
2014 | ||||
| 13. | Effects of number of inserts and insert materials on surface roughness of cast-iron work produced by face milling | Siwawut, S. Saikaew, C. |
2014 | ||||
| 14. | Effects of sputtering coating factors on elastic modulus of MoN coatings | Srisattayakul, P. Saikaew, C. Intanon, N. |
2014 | ||||
| 15. | Improving the mechanical properties of a machine component of a fishing-net weaving machine by duplex coating | Intanon, N. Saikaew, C. Srisattayakul, P. |
2014 | ||||
| 16. | Influence of MoN sputtering coating on wear resistance of a fishing net-weaving machine component | Srisattayakul, P. Saikaew, C. Intanon, N. |
2014 | ||||
| 17. | Optimization of metronidazole sustained-release films using D-optimal design | Peerapattana, J. Ngamsupsiri, T. Cheucharoenvasuchai, N. Saikaew, C. |
2015 | ||||
| 18. | Surface finish improvement in ball nose end milling by optimizing operating conditions for different cutting times | Charnnarong Saikaew Paramet Baowan |
2015 | ||||
| 19. | Effect of surface treatments on wear resistance of spring steel wire as a work-piece material of a fishing net-weaving machine component | Naphatara Intanon Charnnarong Saikaew |
2016 | ||||
| 20. | Application of Central Composite Design in Investigating the effect of Heat Treatment Process on Mechanical Properties of AISI 440C Martensitic Stainless Steel | Saikaew, C. | 2017 | ||||
| 21. | EFFECTS OF HARD CHROME AND MoN-COATED STAINLESS STEEL ON WEAR BEHAVIOUR AND TOOL LIFE MODEL UNDER TWO-BODY ABRASION WEAR TESTING | Srisattayakul, P. Saikaew, C. |
2017 | ||||
| 22. | Influence of helix angle on tool performances of TiAlN- and DLC-coated carbide end mills for dry side milling of stainless steel | Paramet Baowan Charnnarong Saikaew Anurat Wisitsoraat |
2017 | ||||
| 23. | Influence of proposed hardening process on hardness and toughness of martensitic stainless steel | Saikaew, C. | 2017 | ||||
| 24. | Influences of Cutting Speed on Surface Roughness During Machining of Chromium Molybdenum Steel with Ceramic Insert Cutting Tool | Phacharadit Paengchit Charnnarong Saikaew |
2017 | ||||
| 25. | Reciprocating two-body abrasive wear behavior of DC magnetron sputtered Mo-based coatings on hard-chrome plated AISI 316 stainless steel | Srisattayakul, P. Saikaew, C. |
2017 | ||||
| 26. | Wear behaviours of filtered cathodic arc deposited TiN, TiAlSiN and TiCrAlSiN coatings on AISI 316 stainless steel fishing net-weaving machine components under dry soft-sliding against nylon fibres | Supakanya Khanchaiyaphum Charnnarong Saikaew Anurat Wisitsoraat Surasak Surinphong |
2017 | ||||
| 27. | An implementation of measurement system analysis for assessment of machine and part variations in turning operation | Saikaew, C. | 2018 | ||||
| 28. | Cutting performances and wear characteristics of WC inserts coated with TiAlSiN and CrTiAlSiN by filtered cathodic arc in dry face milling of cast iron | Siwawut, S. Saikaew, C. |
2018 | ||||
| 29. | Effects of cutting speed and feed rate on surface roughness in hard turning of AISI 4140 with mixed ceramic cutting tool | Saikaew, C. | 2018 | ||||
| 30. | Feed rate affecting surface roughness and tool wear in dry hard turning of AISI 4140 steel automotive parts using TiN+AlCrN coated inserts | Phacharadit Paengchit Charnnarong Saikaew |
2018 | ||||
| 31. | Influences of Cutting Speed on Surface Roughness during Machining of Chromium Molybdenum Steel with Ceramic Insert Cutting Tool | Saikaew, C. | 2018 | ||||
| 32. | Influences of spindle speed and feed rate on exit burr height and workpiece diameter in drilling forging brass | Saikaew, C. | 2018 | ||||
| 33. | Experimental and Simulation Study on Tool Life Models in Drilling of Forging Brass Using Uncoated-WC and AlCrN Coated-WC Tools | Manit Timata Charnnarong Saikaew |
2019 | ||||
| 34. | Factors influencing hardness of a coating material for coating a machine component | Saikaew, C. | 2019 | ||||
| 35. | Influences of sputtering process factors on wear resistance of TiN coated on a machine component | Charnnarong Saikaew | 2019 | ||||
| 36. | PROCESS FACTORS AFFECTING DEPOSITION RATE OF TiN COATING ON A MACHINE COMPONENT | Saikaew, C. | 2019 | ||||
| 37. | USING MANOVA TO INVESTIGATE THE MACHINING PERFORMANCE OF Al2O3 + TiC INSERT DURING THE TURNING OF AISI 4140 | Phacharadit Paengchit Charnnarong Saikaew |
2019 | ||||
| 38. | Using manova to investigate the machining performance of Al |
Saikaew, C. | 2019 | ||||
| 39. | Experimental analysis and comparative performance of ti-based coatings on hard-chrome plated stainless steel | Supakanya Khanchaiyaphum Charnnarong Saikaew Surasak Surinphong |
2020 | ||||
| 40. | Machining performances of TiN plus AlCrN coated WC and Al2O3 + TiC inserts for turning of AISI 4140 steel under dry condition | Charnnarong Saikaew Phacharadit Paengchit Anurat Wisitsoraat |
2020 | ||||
| 41. | Machining performances of TiN+AlCrN coated WC and Al |
Saikaew, C. | 2020 | Count | 34 | 1 | 20 | 1 |
| Title | Authors | Year | Publication name | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | รวม | ||||||
| 1. | A proposed approach for evaluating the industrial problem ranking in cleaner technology practices | Saikaew, C. | 2005 |
Proceedings of the 35th International Conference on Computers and Industrial Engineering, ICC and IE 2005 (), pp. 1645-1650 |
||||||||
| 2. | Cleaner technology concept applied to material reduction in an engineering course | Saikaew, C. Chillapat, N. |
2006 |
36th International Conference on Computers and Industrial Engineering, ICC and IE 2006 (), pp. 3910-3917 |
||||||||
| 3. | Statistically designed experiments for process improvement: A case study in concrete fence manufacturing | Saikaew, C. | 2007 |
37th International Conference on Computers and Industrial Engineering 2007 (2), pp. 1186-1195 |
||||||||
| 4. | Effect of carbon doping on gas sensing properties of molybdenum oxide nanoneedles | Saikaew, C. | 2009 |
Proceedings of IEEE Sensors (), pp. 316-319 |
||||||||
| 5. | Quality improvement of recycled plastic products using mixture experiment | Saikaew, C. Sripaya, P. |
2009 |
2nd International Conference on Environmental and Computer Science, ICECS 2009 (), pp. 312-316 |
||||||||
| 6. | Using designed experiments to improve the quality of concrete products | Saikaew, C. | 2009 |
2009 International Conference on Computers and Industrial Engineering, CIE 2009 (), pp. 1308-1313 |
||||||||
| 7. | Optimization of carbon doped molybdenum oxide thin film coating process using designed experiments | Saikaew, C. Sootticoon, R. |
2010 |
Surface and Coatings Technology 9-10 (204), pp. 1493-1502 |
||||||||
| 8. | Optimization of molding sand composition for quality improvement of iron castings | Saikaew, C. | 2012 |
Applied Clay Science (67-68), pp. 26-31 |
||||||||
| 9. | A comparative study on the hardness of CrN, CrC and CrCN coatings | Khanchaiyaphum, S. Saikaew, C. Srisattayakul, P. Intanon, N. |
2014 |
Advanced Materials Research (1016), pp. 145-149 |
||||||||
| 10. | Application of Shainin design of experiment method on metal turning operation | Saikaew, C. Chanapal, C. Phrachai, T. |
2014 |
Advanced Materials Research (1016), pp. 49-53 |
||||||||
| 11. | Design and fabrication of wear testing machine for a fishing net- weaving machine component | Intanon, N. Saikaew, C. Srisattayakul, P. |
2014 |
Advanced Materials Research (896), pp. 706-709 |
||||||||
| 12. | Effects of number of inserts and insert materials on surface roughness of cast-iron work produced by face milling | Siwawut, S. Saikaew, C. |
2014 |
Advanced Materials Research (1016), pp. 135-139 |
||||||||
| 13. | Effects of sputtering coating factors on elastic modulus of MoN coatings | Srisattayakul, P. Saikaew, C. Intanon, N. |
2014 |
Advanced Materials Research (896), pp. 249-252 |
||||||||
| 14. | Improving the mechanical properties of a machine component of a fishing-net weaving machine by duplex coating | Intanon, N. Saikaew, C. Srisattayakul, P. |
2014 |
Advanced Materials Research (1016), pp. 90-94 |
||||||||
| 15. | Influence of MoN sputtering coating on wear resistance of a fishing net-weaving machine component | Srisattayakul, P. Saikaew, C. Intanon, N. |
2014 |
Advanced Materials Research (1016), pp. 80-84 |
||||||||
| 16. | Optimization of metronidazole sustained-release films using D-optimal design | Peerapattana, J. Ngamsupsiri, T. Cheucharoenvasuchai, N. Saikaew, C. |
2015 |
International Journal of Pharmaceutics 1-2 (484), pp. 1-7 |
||||||||
| 17. | Application of central composite design in investigating the effect of heat treatment process on mechanical properties of AISI 440C martensitic stainless steel | Saikaew, C. | 2017 |
Proceedings of 2017 8th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2017 (), pp. 27-31 |
||||||||
| 18. | Effects of hard chrome and MoN-coated stainless steel on wear behaviour and tool life model under two-body abrasion wear testing | Srisattayakul, P. Saikaew, C. |
2017 |
Metalurgija 3-4 (56), pp. 371-374 |
||||||||
| 19. | Influence of helix angle on tool performances of TiAlN- and DLC-coated carbide end mills for dry side milling of stainless steel | Saikaew, C. | 2017 |
International Journal of Advanced Manufacturing Technology 9-12 (90), pp. 3085-3097 |
||||||||
| 20. | Influence of proposed hardening process on hardness and toughness of martensitic stainless steel | Saikaew, C. | 2017 |
Key Engineering Materials (750 KEM), pp. 103-106 |
||||||||
| 21. | Reciprocating two-body abrasive wear behavior of DC magnetron sputtered Mo-based coatings on hard-chrome plated AISI 316 stainless steel | Srisattayakul, P. Saikaew, C. |
2017 |
Wear (378-379), pp. 96-105 |
||||||||
| 22. | Wear behaviours of filtered cathodic arc deposited TiN, TiAlSiN and TiCrAlSiN coatings on AISI 316 stainless steel fishing net-weaving machine components under dry soft-sliding against nylon fibres | Khanchaiyaphum, S. Saikaew, C. |
2017 |
Wear (390-391), pp. 146-154 |
||||||||
| 23. | An implementation of measurement system analysis for assessment of machine and part variations in turning operation | Saikaew, C. | 2018 |
Measurement: Journal of the International Measurement Confederation (118), pp. 246-252 |
||||||||
| 24. | Cutting performances and wear characteristics of WC inserts coated with TiAlSiN and CrTiAlSiN by filtered cathodic arc in dry face milling of cast iron | Siwawut, S. Saikaew, C. |
2018 |
International Journal of Advanced Manufacturing Technology 9-12 (97), pp. 3883-3892 |
||||||||
| 25. | Effects of cutting speed and feed rate on surface roughness in hard turning of AISI 4140 with mixed ceramic cutting tool | Saikaew, C. | 2018 |
Key Engineering Materials (779 KEM), pp. 153-158 |
||||||||
| 26. | Feed rate affecting surface roughness and tool wear in dry hard turning of AISI 4140 steel automotive parts using TiN+AlCrN coated inserts | Saikaew, C. | 2018 |
IOP Conference Series: Materials Science and Engineering 1 (307), pp. |
||||||||
| 27. | Influences of Cutting Speed on Surface Roughness during Machining of Chromium Molybdenum Steel with Ceramic Insert Cutting Tool | Saikaew, C. | 2018 |
Proceedings - 2017 International Symposium on Computer Science and Intelligent Controls, ISCSIC 2017 (2018-February), pp. 172-176 |
||||||||
| 28. | Influences of spindle speed and feed rate on exit burr height and workpiece diameter in drilling forging brass | Saikaew, C. | 2018 |
Solid State Phenomena (279 SSP), pp. 67-71 |
||||||||
| 29. | Factors influencing hardness of a coating material for coating a machine component | Saikaew, C. | 2019 |
Key Engineering Materials (821 KEM), pp. 294-300 |
||||||||
| 30. | Influences of sputtering process factors on wear resistance of TiN coated on a machine component | Saikaew, C. | 2019 |
IOP Conference Series: Materials Science and Engineering 1 (503), pp. |
||||||||
| 31. | Process factors affecting deposition rate of tin coating on a machine component | Saikaew, C. | 2019 |
Materiali in Tehnologije 3 (53), pp. 409-415 |
||||||||
| 32. | Using manova to investigate the machining performance of Al <inf>2</inf> O <inf>3</inf> + Tic insert during the turning of Aisi 4140 | Saikaew, C. | 2019 |
Materiali in Tehnologije 1 (53), pp. 25-32 |
||||||||
| 33. | Experimental analysis and comparative performance of ti-based coatings on hard-chrome plated stainless steel | Khanchaiyaphum, S. Saikaew, C. |
2020 |
Tehnicki Vjesnik 1 (27), pp. 20-26 |
||||||||
| 34. | Machining performances of TiN+AlCrN coated WC and Al<inf>2</inf>O<inf>3</inf>+TiC inserts for turning of AISI 4140 steel under dry condition | Saikaew, C. | 2020 |
Journal of Manufacturing Processes (50), pp. 412-420 |
||||||||
| Title | Authors | Year | Journal title | ||
|---|---|---|---|---|---|
| 1. | Optimization of metronidazole sustained-release films using D-optimal design. | Peerapattana, J Ngamsupsiri, T Cheucharoenvasuchai, N Saikaew, C |
2015 |
International journal of pharmaceutics 1 (484), pp. 1-7 |
| Title | Authors | Year | Journal title | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | รวม | ||||||
| 1. | Optimization of carbon doped molybdenum oxide thin film coating process using designed experiments | Charnnarong Saikaew Anurat Wisitsoraat Rangsrit Sootticoon |
2010 |
SURFACE & COATINGS TECHNOLOGY 9-10 (204.0), pp. 1493.0-1502.0 |
22 | 0 | 0 | 0 | 0 | 0 | 22 | |
| 2. | Optimization of molding sand composition for quality improvement of iron castings | Charnnarong Saikaew Sermsak Wiengwiset |
2012 |
APPLIED CLAY SCIENCE (67-68), pp. 26.0-31.0 |
14 | 0 | 0 | 0 | 0 | 0 | 14 | |
| 3. | Optimization of metronidazole sustained-release films using D-optimal design | Jomjai Peerapattana Teeraphat Ngamsupsiri Nopadol Cheucharoenvasuchai Charnnarong Saikaew |
2015 |
INTERNATIONAL JOURNAL OF PHARMACEUTICS 1-2 (484.0), pp. 1.0-7.0 |
13 | 0 | 0 | 0 | 0 | 0 | 13 | |
| 4. | Surface finish improvement in ball nose end milling by optimizing operating conditions for different cutting times | Charnnarong Saikaew Paramet Baowan |
2015 |
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES 1.0 (22.0), pp. 38.0-50.0 |
3 | 0 | 0 | 0 | 0 | 0 | 3 | |
| 5. | Effect of surface treatments on wear resistance of spring steel wire as a work-piece material of a fishing net-weaving machine component | Naphatara Intanon Charnnarong Saikaew |
2016 |
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES 1.0 (23.0), pp. 79.0-87.0 |
4 | 0 | 0 | 0 | 0 | 0 | 4 | |
| 6. | Application of Central Composite Design in Investigating the effect of Heat Treatment Process on Mechanical Properties of AISI 440C Martensitic Stainless Steel | Charnnarong Saikaew Anuparp Wijop |
2017 |
PROCEEDINGS OF 2017 8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND INTELLIGENT MANUFACTURING TECHNOLOGIES (ICMIMT) (), pp. 27.0-31.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 7. | EFFECTS OF HARD CHROME AND MoN-COATED STAINLESS STEEL ON WEAR BEHAVIOUR AND TOOL LIFE MODEL UNDER TWO-BODY ABRASION WEAR TESTING | P. Srisattayakul C. Saikaew A. Wisitsoraat |
2017 |
METALURGIJA 3-4 (56.0), pp. 371.0-374.0 |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
| 8. | Influence of helix angle on tool performances of TiAlN- and DLC-coated carbide end mills for dry side milling of stainless steel | Paramet Baowan Charnnarong Saikaew Anurat Wisitsoraat |
2017 |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 2020-12-09 (90.0), pp. 3085.0-3097.0 |
14 | 0 | 0 | 0 | 0 | 0 | 14 | |
| 9. | Influences of Cutting Speed on Surface Roughness During Machining of Chromium Molybdenum Steel with Ceramic Insert Cutting Tool | Phacharadit Paengchit Charnnarong Saikaew |
2017 |
2017 INTERNATIONAL SYMPOSIUM ON COMPUTER SCIENCE AND INTELLIGENT CONTROLS (ISCSIC) (), pp. 172.0-176.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 10. | Reciprocating two-body abrasive wear behavior of DC magnetron sputtered Mo-based coatings on hard-chrome plated AISI 316 stainless steel | Parinya Srisattayakul Charnnarong Saikaew Anurat Wisitsoraat Ditsayut Phokharatkul |
2017 |
WEAR (378-379), pp. 96.0-105.0 |
21 | 0 | 0 | 0 | 0 | 0 | 21 | |
| 11. | Wear behaviours of filtered cathodic arc deposited TiN, TiAlSiN and TiCrAlSiN coatings on AISI 316 stainless steel fishing net-weaving machine components under dry soft-sliding against nylon fibres | Supakanya Khanchaiyaphum Charnnarong Saikaew Anurat Wisitsoraat Surasak Surinphong |
2017 |
WEAR (390-391), pp. 146.0-154.0 |
6 | 0 | 0 | 0 | 0 | 0 | 6 | |
| 12. | An implementation of measurement system analysis for assessment of machine and part variations in turning operation | Charnnarong Saikaew | 2018 |
MEASUREMENT (118.0), pp. 246.0-252.0 |
4 | 0 | 0 | 0 | 0 | 0 | 4 | |
| 13. | Cutting performances and wear characteristics of WC inserts coated with TiAlSiN and CrTiAlSiN by filtered cathodic arc in dry face milling of cast iron | Sutham Siwawut Charnnarong Saikaew Anurat Wisitsoraat Surasak Surinphong |
2018 |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 9-12 (97.0), pp. 3883.0-3892.0 |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
| 14. | Feed rate affecting surface roughness and tool wear in dry hard turning of AISI 4140 steel automotive parts using TiN plus AlCrN coated inserts | Phacharadit Paengchit Charnnarong Saikaew |
2018 |
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS (307.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 15. | Experimental and Simulation Study on Tool Life Models in Drilling of Forging Brass Using Uncoated-WC and AlCrN Coated-WC Tools | Manit Timata Charnnarong Saikaew |
2019 |
COATINGS 12.0 (9.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 16. | Influences of sputtering process factors on wear resistance of TiN coated on a machine component | Charnnarong Saikaew | 2019 |
FUNCTIONAL MATERIALS AND NANOTECHNOLOGIES (FM&NT 2018) (503.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 17. | PROCESS FACTORS AFFECTING DEPOSITION RATE OF TiN COATING ON A MACHINE COMPONENT | Charnnarong Saikaew | 2019 |
MATERIALI IN TEHNOLOGIJE 3.0 (53.0), pp. 409.0-415.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 18. | USING MANOVA TO INVESTIGATE THE MACHINING PERFORMANCE OF Al2O3 + TiC INSERT DURING THE TURNING OF AISI 4140 | Phacharadit Paengchit Charnnarong Saikaew |
2019 |
MATERIALI IN TEHNOLOGIJE 1.0 (53.0), pp. 25.0-32.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 19. | Experimental Analysis and Comparative Performance of Ti-Based Coatings on Hard-Chrome Plated Stainless Steel | Supakanya Khanchaiyaphum Charnnarong Saikaew Surasak Surinphong |
2020 |
TEHNICKI VJESNIK-TECHNICAL GAZETTE 1.0 (27.0), pp. 20.0-26.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 20. | Machining performances of TiN plus AlCrN coated WC and Al2O3 + TiC inserts for turning of AISI 4140 steel under dry condition | Charnnarong Saikaew Phacharadit Paengchit Anurat Wisitsoraat |
2020 |
JOURNAL OF MANUFACTURING PROCESSES (50.0), pp. 412.0-420.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| Title | Authors | Year | Journal title | ||
|---|---|---|---|---|---|
| 1. | การพัฒนาและปรับปรุงคุณภาพในอุตสาหกรรมการกัดขึ้นรูปแม่พิมพ์ด้วยการออกแบบการทดลอง (Quality Development and Improvement in Mold Making Industry with Designed Experiments) | ปรเมศวร์ เบ้าวรรณ ชาญณรงค์ สายแก้ว |
2013 |
KKU RESEARCH JOURNAL (GRADUATE STUDIES) (13 No 2), pp. 42-53 |
| ชื่อโครงการ | Authors | ประเภทโครงการ | ปีงบประมาณ | ทุนวิจับ |
|---|