KKU Scholar | WEB : researcher

กลับ

รศ. อำนาจ สุขศรี

ภาควิชาวิศวกรรมไฟฟ้า,

คณะวิศวกรรมศาสตร์,

มหาวิทยาลัยขอนแก่น

16234839100: H-INDEX 8

บทความ

TCI อ้างอิงจาก http://www.tci-thaijo.org/

0

SCOPUS

0

PUBMED

0

ISI

0

TCI

	Title	Author	Year	SCOPUS	PUBMED	ISI	TCI
1.	Electrical Leakage Current on 22 k V Porcelain Insulators Tested under Saline Solution	Amnart Suksri Kittipong Tonmitra Kongchuk Boontun	2003
2.	HVDC Bridge Generator Feeded by a Current Source From Series Resonant Converter	Kitipong Tonmitra Chaiporn Addoddorn Amnart Suksri	2005
3.	Optimal Shunt Capacitor Sizing and Location on the Electrical Radial Distribution System with Microsoft Excel Solver	Vorasak Nirukkanaporn Jittipath Triyangkulsri Amnart Suksri Cheiwchan Nethan	2005
4.	A comparative study on suitable high voltage sources for ozone generation	Suksri, A. Tonmitra, K. Apiratikul, P.	2009
5.	A comparison on leakage current of 22 kV porcelain insulator by using rotating wheel tester with high voltage AC and impulse voltage excitation	Bounthanh Banhthasit Kittipong Tonmitra Amnart Suksri Arkom Kaewrawang Mongkol Leeparkobboon	2011
6.	Evaluating on effect of HVAC series with impulse excitation voltage on porcelain insulator by using rotating wheel dip test	Banhthasit, B. Tonmitra, K. Kaewrawang, A. Suksri, A.	2012
7.	Investigation on surface degradation of wind turbine blades surface using modified surface tracking test as part of lightning protection improvement	Sasimma, W. Suksri, A.	2013
8.	Solid investigation in oil barrier dielectric under non-uniform electric field	Seela-Or, S. Tonmitr, K. Kaewrawang, A. Suksri, A.	2013
9.	The influence of nano filled aluminum oxide on electrical tree growth behavior under high voltage non-uniform field stress	Tonmitr, K. Suksri, A.	2013
10.	100 millimeters sphere- gap with non uniform field electrodes triggered gaps	Tonmitr, K. Suksri, A.	2014
11.	Performance investigation of non-linear insulator against surface tracking on wind turbine blade surface	Sasimma, W. Suksri, A.	2014
12.	Improvement on surface tracking and tensile stress of insulator via the used of aluminium oxide filler	Suksri, A.	2016
13.	The Design and Optimization of Combined Rogowski Coil Based on Printed Circuit Board	Pongchit Saetang Amnart Suksri	2016
14.	A study on coconut shell powder filled in epoxy resin: A remedy for electrical tree growth inhibition	Suksri, A.	2017
15.	A study on modification properties of silicone rubber using organic filler from golden apple snail shell	Suksri, A.	2017
16.	The improved dielectric properties of natural ester oil by using ZnO and TiO2 nanoparticles	Suksri, A.	2017
17.	Acceleration in biodiesel production from palm oil process by high voltage electric field	Tonmitr, K. Suksri, A.	2018
18.	Coconut shell powder and electrical tree inhibition of solid insulator	Suksri, A.	2018
19.	Effect of partial shading patterns and degrees of shading on Total Cross-Tied (TCT) photovoltaic array configuration	Chayut Tubniyom Watcharin Jaideaw Rongrit Chatthaworn Amnart Suksri Tanakorn Wongwuttanasatian	2018
20.	Organic filler from golden apple snails shells to improve the silicone rubber insulator properties	Sujirat Tepsila Amnart Suksri	2018
21.	Simulation of photovoltaic module configuration for different shaded patterns	Watcharin Jaideaw Amnart Suksri Tanakorn Wongwuttanasatian	2018
22.	Cooling enhancement of photovoltaic cell via the use of phase change materials in a different designed container shape	Wongwuttanasatian, T. Suksri, A.	2019
23.	Minimization of Losses in Solar Photovoltaic Modules by Reconfiguration under Various Patterns of Partial Shading	, Suksri, A. Wongwuttanasatian, T.	2019
24.	The effect of electric field on glycerine sedimentation and reaction acceleration using multiple high voltage electrodes designed for biodiesel production	Tharin Ratanabuntha Tanakorn Wongwuttanasatian Amnart Suksri	2019
25.	Performance enhancement of a photovoltaic module by passive cooling using phase change material in a finned container heat sink	Wongwuttanasatian, T. Suksri, A.	2020
	Count			21	0	7	4

	Title	Authors	Year	Publication name	Cited count
	Title	Authors	Year	Publication name	< 2015	2016	2017	2018	2019	2020	รวม
1.	A comparative study on suitable high voltage sources for ozone generation	Suksri, A. Tonmitra, K. Apiratikul, P.	2009	2009 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, ECTI-CON 2009 (1), pp. 296-299
2.	Evaluating on effect of HVAC series with impulse excitation voltage on porcelain insulator by using rotating wheel dip test	Banhthasit, B. Tonmitra, K. Kaewrawang, A. Suksri, A.	2012	Advanced Materials Research (354-355), pp. 159-164
3.	Investigation on surface degradation of wind turbine blades surface using modified surface tracking test as part of lightning protection improvement	Sasimma, W. Suksri, A.	2013	Advanced Materials Research (740), pp. 704-708
4.	Solid investigation in oil barrier dielectric under non-uniform electric field	Seela-Or, S. Tonmitr, K. Kaewrawang, A. Suksri, A.	2013	2013 10th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, ECTI-CON 2013 (), pp.
5.	The influence of nano filled aluminum oxide on electrical tree growth behavior under high voltage non-uniform field stress	Tonmitr, K. Suksri, A.	2013	Advanced Materials Research (740), pp. 488-491
6.	100 millimeters sphere- gap with non uniform field electrodes triggered gaps	Tonmitr, K. Suksri, A.	2014	Applied Mechanics and Materials (448-453), pp. 2016-2024
7.	Performance investigation of non-linear insulator against surface tracking on wind turbine blade surface	Sasimma, W. Suksri, A.	2014	Advanced Materials Research (911), pp. 190-194
8.	Improvement on surface tracking and tensile stress of insulator via the used of aluminium oxide filler	Suksri, A.	2016	Key Engineering Materials (705), pp. 98-102
9.	The Design and Optimization of Combined Rogowski Coil Based on Printed Circuit Board	Suksri, A.	2016	MATEC Web of Conferences (70), pp.
10.	A study on coconut shell powder filled in epoxy resin: A remedy for electrical tree growth inhibition	Suksri, A.	2017	Key Engineering Materials (718), pp. 36-39
11.	A study on modification properties of silicone rubber using organic filler from golden apple snail shell	Suksri, A.	2017	Key Engineering Materials (718), pp. 40-44
12.	The improved dielectric properties of natural ester oil by using ZnO and TiO<inf>2</inf> nanoparticles	Suksri, A.	2017	Engineering and Applied Science Research 3 (44), pp. 148-153
13.	Acceleration in biodiesel production from palm oil process by high voltage electric field	Tonmitr, K. Suksri, A.	2018	International Journal of Smart Grid and Clean Energy 3 (7), pp. 225-230
14.	Coconut shell powder and electrical tree inhibition of solid insulator	Suksri, A.	2018	Key Engineering Materials (775 KEM), pp. 89-93
15.	Effect of partial shading patterns and degrees of shading on Total Cross-Tied (TCT) photovoltaic array configuration	, Suksri, A. Wongwuttanasatian, T.	2018	Energy Procedia (153), pp. 35-41
16.	Organic filler from golden apple snails shells to improve the silicone rubber insulator properties	Suksri, A.	2018	IOP Conference Series: Earth and Environmental Science 1 (113), pp.
17.	Simulation of photovoltaic module configuration for different shaded patterns	Suksri, A. Wongwuttanasatian, T.	2018	IOP Conference Series: Earth and Environmental Science 1 (113), pp.
18.	Cooling enhancement of photovoltaic cell via the use of phase change materials in a different designed container shape	Wongwuttanasatian, T. Suksri, A.	2019	IOP Conference Series: Earth and Environmental Science 1 (257), pp.
19.	Minimization of losses in solar photovoltaic modules by reconfiguration under various patterns of partial shading	, Suksri, A. Wongwuttanasatian, T.	2019	Energies 1 (12), pp.
20.	The effect of electric field on glycerine sedimentation and reaction acceleration using multiple high voltage electrodes designed for biodiesel production	Wongwuttanasatian, T. Suksri, A.	2019	IOP Conference Series: Earth and Environmental Science 1 (257), pp.
21.	Performance enhancement of a photovoltaic module by passive cooling using phase change material in a finned container heat sink	Wongwuttanasatian, T. Suksri, A.	2020	Solar Energy (195), pp. 47-53

	Title	Authors	Year	Journal title

	Title	Authors	Year	Journal title	Cited count
	Title	Authors	Year	Journal title	< 2015	2016	2017	2018	2019	2020	รวม
1.	The Design and Optimization of Combined Rogowski Coil Based on Printed Circuit Board	Pongchit Saetang Amnart Suksri	2016	2016 3RD INTERNATIONAL CONFERENCE ON MANUFACTURING AND INDUSTRIAL TECHNOLOGIES (70.0), pp.	0	0	0	0	0	0	0
2.	Effect of partial shading patterns and degrees of shading on Total Cross-Tied (TCT) photovoltaic array configuration	Chayut Tubniyom Watcharin Jaideaw Rongrit Chatthaworn Amnart Suksri Tanakorn Wongwuttanasatian	2018	5TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT RESEARCH (ICEER 2018) (153.0), pp. 35.0-41.0	1	0	0	0	0	0	1
3.	Organic filler from golden apple snails shells to improve the silicone rubber insulator properties	Sujirat Tepsila Amnart Suksri	2018	3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp.	0	0	0	0	0	0	0
4.	Simulation of photovoltaic module configuration for different shaded patterns	Watcharin Jaideaw Amnart Suksri Tanakorn Wongwuttanasatian	2018	3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp.	2	0	0	0	0	0	2
5.	Cooling enhancement of photovoltaic cell via the use of phase change materials in a different designed container shape	Tachakun Sarikarin Tanakorn Wongwuttanasatian Amnart Suksri	2019	2019 9TH INTERNATIONAL CONFERENCE ON FUTURE ENVIRONMENT AND ENERGY (257.0), pp.	0	0	0	0	0	0	0
6.	Minimization of Losses in Solar Photovoltaic Modules by Reconfiguration under Various Patterns of Partial Shading	Chayut Tubniyom Rongrit Chatthaworn Amnart Suksri Tanakorn Wongwuttanasatian	2019	ENERGIES 1.0 (12.0), pp.	5	0	0	0	0	0	5
7.	The effect of electric field on glycerine sedimentation and reaction acceleration using multiple high voltage electrodes designed for biodiesel production	Tharin Ratanabuntha Tanakorn Wongwuttanasatian Amnart Suksri	2019	2019 9TH INTERNATIONAL CONFERENCE ON FUTURE ENVIRONMENT AND ENERGY (257.0), pp.	0	0	0	0	0	0	0

	Title	Authors	Year	Journal title
1.	Electrical Leakage Current on 22 k V Porcelain Insulators Tested under Saline Solution	Amnart Suksri Kittipong Tonmitra Kongchuk Boontun	2003	KKU ENGINEERING JOURNAL 4 (30), pp. 379-389
2.	Optimal Shunt Capacitor Sizing and Location on the Electrical Radial Distribution System with Microsoft Excel Solver	Vorasak Nirukkanaporn Jittipath Triyangkulsri Amnart Suksri Cheiwchan Nethan	2005	KKU ENGINEERING JOURNAL 6 (32), pp. 813-827
3.	HVDC Bridge Generator Feeded by a Current Source From Series Resonant Converter	Kitipong Tonmitra Chaiporn Addoddorn Amnart Suksri	2005	KKU ENGINEERING JOURNAL 3 (32), pp. 391-401
4.	A comparison on leakage current of 22 kV porcelain insulator by using rotating wheel tester with high voltage AC and impulse voltage excitation	Bounthanh Banhthasit Kittipong Tonmitra Amnart Suksri Arkom Kaewrawang Mongkol Leeparkobboon	2011	KKU ENGINEERING JOURNAL 3 (38), pp. 297-304

	ชื่อโครงการ	Authors	ประเภทโครงการ	ปีงบประมาณ	ทุนวิจับ
1.	การผลิตเชื้อเพลิงเม็ดจากฟิลเตอร์เค้ก (filter cake pellet) สำหรับหม้อไอน้ำ เพื่อเปลี่ยนจากของเสียเป็นพลังงาน	รศ.ดร. ธนากร วงศ์วัฒนาเสถียร ศ.ดร. ทนงเกียรติ เกียรติศิริโรจน์ ศ.ดร. ผดุงศักดิ์ รัตนเดโช รศ.ดร. ดร เพ็ญจิตร รศ.ดร. อำนาจ สุขศรี ผศ.ดร. กิตติพงษ์ ลาลุน ผศ.ดร. ธัญลักษณ์ ราษฎร์ภักดี ผศ.ดร. ดร ณัญธิวัฒน์ ผศ.ดร. ดร สุรพล อ. ดร ระชา	โครงการ	2562	ทุนงบประมาณแผ่นดินประจำปี 2562 (งบบูรณาการวิจัยและนวัตกรรม)