| Title | Author | Year | SCOPUS | PUBMED | ISI | TCI | |
|---|---|---|---|---|---|---|---|
| 1. | Electrical Leakage Current on 22 k V Porcelain Insulators Tested under Saline Solution | Amnart Suksri Kittipong Tonmitra Kongchuk Boontun |
2003 | ||||
| 2. | HVDC Bridge Generator Feeded by a Current Source From Series Resonant Converter | Kitipong Tonmitra Chaiporn Addoddorn Amnart Suksri |
2005 | ||||
| 3. | Optimal Shunt Capacitor Sizing and Location on the Electrical Radial Distribution System with Microsoft Excel Solver | Vorasak Nirukkanaporn Jittipath Triyangkulsri Amnart Suksri Cheiwchan Nethan |
2005 | ||||
| 4. | A comparative study on suitable high voltage sources for ozone generation | Suksri, A. Tonmitra, K. Apiratikul, P. |
2009 | ||||
| 5. | A comparison on leakage current of 22 kV porcelain insulator by using rotating wheel tester with high voltage AC and impulse voltage excitation | Bounthanh Banhthasit Kittipong Tonmitra Amnart Suksri Arkom Kaewrawang Mongkol Leeparkobboon |
2011 | ||||
| 6. | Evaluating on effect of HVAC series with impulse excitation voltage on porcelain insulator by using rotating wheel dip test | Banhthasit, B. Tonmitra, K. Kaewrawang, A. Suksri, A. |
2012 | ||||
| 7. | Investigation on surface degradation of wind turbine blades surface using modified surface tracking test as part of lightning protection improvement | Sasimma, W. Suksri, A. |
2013 | ||||
| 8. | Solid investigation in oil barrier dielectric under non-uniform electric field | Seela-Or, S. Tonmitr, K. Kaewrawang, A. Suksri, A. |
2013 | ||||
| 9. | The influence of nano filled aluminum oxide on electrical tree growth behavior under high voltage non-uniform field stress | Tonmitr, K. Suksri, A. |
2013 | ||||
| 10. | 100 millimeters sphere- gap with non uniform field electrodes triggered gaps | Tonmitr, K. Suksri, A. |
2014 | ||||
| 11. | Performance investigation of non-linear insulator against surface tracking on wind turbine blade surface | Sasimma, W. Suksri, A. |
2014 | ||||
| 12. | Improvement on surface tracking and tensile stress of insulator via the used of aluminium oxide filler | Suksri, A. | 2016 | ||||
| 13. | The Design and Optimization of Combined Rogowski Coil Based on Printed Circuit Board | Pongchit Saetang Amnart Suksri |
2016 | ||||
| 14. | A study on coconut shell powder filled in epoxy resin: A remedy for electrical tree growth inhibition | Suksri, A. | 2017 | ||||
| 15. | A study on modification properties of silicone rubber using organic filler from golden apple snail shell | Suksri, A. | 2017 | ||||
| 16. | The improved dielectric properties of natural ester oil by using ZnO and TiO |
Suksri, A. | 2017 | ||||
| 17. | Acceleration in biodiesel production from palm oil process by high voltage electric field | Tonmitr, K. Suksri, A. |
2018 | ||||
| 18. | Coconut shell powder and electrical tree inhibition of solid insulator | Suksri, A. | 2018 | ||||
| 19. | Effect of partial shading patterns and degrees of shading on Total Cross-Tied (TCT) photovoltaic array configuration | Chayut Tubniyom Watcharin Jaideaw Rongrit Chatthaworn Amnart Suksri Tanakorn Wongwuttanasatian |
2018 | ||||
| 20. | Organic filler from golden apple snails shells to improve the silicone rubber insulator properties | Sujirat Tepsila Amnart Suksri |
2018 | ||||
| 21. | Simulation of photovoltaic module configuration for different shaded patterns | Suksri, A. Wongwuttanasatian, T. |
2018 | ||||
| 22. | Temperature compensation of photovoltaic cell using phase change materials | Sarikarin, T. Suksri, A. Wongwuttanasatian, T. |
2018 | ||||
| 23. | Cooling enhancement of photovoltaic cell via the use of phase change materials in a different designed container shape | Tachakun Sarikarin Tanakorn Wongwuttanasatian Amnart Suksri |
2019 | ||||
| 24. | Minimization of Losses in Solar Photovoltaic Modules by Reconfiguration under Various Patterns of Partial Shading | , Suksri, A. Wongwuttanasatian, T. |
2019 | ||||
| 25. | The effect of electric field on glycerine sedimentation and reaction acceleration using multiple high voltage electrodes designed for biodiesel production | Tharin Ratanabuntha Tanakorn Wongwuttanasatian Amnart Suksri |
2019 | ||||
| 26. | Effects of micro-eggshells filler on tracking and erosion resistance of silicone rubber composites | Wongwuttanasatian, T. Suksri, A. |
2020 | ||||
| 27. | Glycerin Separation from Biodiesel Transesterification Process by Pulsed Electric Field with Specific Pulse Forming Network | Hinthao, T. Wongwuttanasatian, T. Kampeerawat, W. Suksri, A. |
2020 | ||||
| 28. | Impact of pulsed electric field on glycerin sedimentation from biodiesel production process | Wongwuttanasatian, T. Suksri, A. |
2020 | ||||
| 29. | Multi-electrode Designed Shape for Small Scale Plasma Incinerator | Kongphet, G. Wongwuttanasatian, T. Suksri, A. |
2020 | ||||
| 30. | Performance enhancement of a photovoltaic module by passive cooling using phase change material in a finned container heat sink | Wongwuttanasatian, T. Suksri, A. |
2020 | ||||
| 31. | The Effect of Micro-Eggshells and Aluminium Hydroxide on Tracking Resistance of Silicone Rubber Composite | Khaigunha, P. Wongwuttanasatian, T. Suksri, A. |
2020 | ||||
| 32. | A Study on an Impact of Tower Surge Impedance against Lightning Surge Phenomena | Chatthaworn, R. Suksri, A. |
2021 | ||||
| 33. | Electrical breakdown voltage of palm oil and nano graphene filler in nanofluids application on transformer insulating oil | Suksri, A. | 2021 | ||||
| 34. | An adaptive control strategy for VSG with reduced size energy storage system | Jongudomkarn, J. Suksri, A. |
2022 | ||||
| 35. | Back flashover mitigation for transmission tower by parallel additional multiple conductors from tower top to ground footage to alter the surge impedance | Satchathampitak, C. Chatthaworn, R. Suksri, A. |
2022 | ||||
| 36. | Efficiency improvement of PV module using a binary-organic eutectic phase change material in a finned container | Homlakorn, S. Suksri, A. Wongwuttanasatian, T. |
2022 | ||||
| 37. | Electrode Shape Design and Current Density Distribution for Stable Plasma Beam Incinerator | Kongphet, G. Wongwuttanasatian, T. Suksri, A. |
2022 | ||||
| 38. | Graphene Nanoplatelets Effect on Electrical Tree Inhibition in Epoxy Resin Insulator | Khaibuth, P. Suksri, A. |
2022 | ||||
| 39. | Long Term Thermal Performance of Palm Oil and Nano Graphene Filler in Nanofluids Application on Transformer Insulating Oil and Electrical Breakdown Voltage | Wajanasoonthon, K. Suksri, A. |
2022 | ||||
| 40. | Comparative study for photovoltaic cooling using metal mesh inserted eutectic phase change material enclosure | Homlakorn, S. | 2023 | ||||
| 41. | A Pilot–Scale Continuous Torrefier for Bagasse Quality Improvement in a Biomass Powerplant | Pajampa, K. Suksri, A. Wongwuttanasatian, T. |
2024 | ||||
| 42. | Thermal management of photovoltaic module using affordable organic phase change material combined with nano metal oxide particles enhancer | Phukaokaew, W. Suksri, A. Punyawudho, K. |
2024 | ||||
| 43. | Optimisation of flow configuration for PVT system assisted by MgO nanoparticles PCM cooling | Phukaokaew, W. Suksri, A. Punyawudho, K. |
2025 | Count | 39 | 0 | 7 | 4 |
| Title | Authors | Year | Publication name | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | Total | ||||||
| 1. | A comparative study on suitable high voltage sources for ozone generation | Suksri, A. Tonmitra, K. Apiratikul, P. |
2009 |
2009 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, ECTI-CON 2009 (1), pp. 296-299 |
||||||||
| 2. | Evaluating on effect of HVAC series with impulse excitation voltage on porcelain insulator by using rotating wheel dip test | Banhthasit, B. Tonmitra, K. Kaewrawang, A. Suksri, A. |
2012 |
Advanced Materials Research (354-355), pp. 159-164 |
||||||||
| 3. | Investigation on surface degradation of wind turbine blades surface using modified surface tracking test as part of lightning protection improvement | Sasimma, W. Suksri, A. |
2013 |
Advanced Materials Research (740), pp. 704-708 |
||||||||
| 4. | Solid investigation in oil barrier dielectric under non-uniform electric field | Seela-Or, S. Tonmitr, K. Kaewrawang, A. Suksri, A. |
2013 |
2013 10th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, ECTI-CON 2013 (), pp. |
||||||||
| 5. | The influence of nano filled aluminum oxide on electrical tree growth behavior under high voltage non-uniform field stress | Tonmitr, K. Suksri, A. |
2013 |
Advanced Materials Research (740), pp. 488-491 |
||||||||
| 6. | 100 millimeters sphere- gap with non uniform field electrodes triggered gaps | Tonmitr, K. Suksri, A. |
2014 |
Applied Mechanics and Materials (448-453), pp. 2016-2024 |
||||||||
| 7. | Performance investigation of non-linear insulator against surface tracking on wind turbine blade surface | Sasimma, W. Suksri, A. |
2014 |
Advanced Materials Research (911), pp. 190-194 |
||||||||
| 8. | Improvement on surface tracking and tensile stress of insulator via the used of aluminium oxide filler | Suksri, A. | 2016 |
Key Engineering Materials (705), pp. 98-102 |
||||||||
| 9. | The Design and Optimization of Combined Rogowski Coil Based on Printed Circuit Board | Suksri, A. | 2016 |
MATEC Web of Conferences (70), pp. |
||||||||
| 10. | A study on coconut shell powder filled in epoxy resin: A remedy for electrical tree growth inhibition | Suksri, A. | 2017 |
Key Engineering Materials (718), pp. 36-39 |
||||||||
| 11. | A study on modification properties of silicone rubber using organic filler from golden apple snail shell | Suksri, A. | 2017 |
Key Engineering Materials (718), pp. 40-44 |
||||||||
| 12. | The improved dielectric properties of natural ester oil by using ZnO and TiO<inf>2</inf> nanoparticles | Suksri, A. | 2017 |
Engineering and Applied Science Research 3 (44), pp. 148-153 |
||||||||
| 13. | Acceleration in biodiesel production from palm oil process by high voltage electric field | Tonmitr, K. Suksri, A. |
2018 |
International Journal of Smart Grid and Clean Energy 3 (7), pp. 225-230 |
||||||||
| 14. | Coconut shell powder and electrical tree inhibition of solid insulator | Suksri, A. | 2018 |
Key Engineering Materials (775 KEM), pp. 89-93 |
||||||||
| 15. | Effect of partial shading patterns and degrees of shading on Total Cross-Tied (TCT) photovoltaic array configuration | , Suksri, A. Wongwuttanasatian, T. |
2018 |
Energy Procedia (153), pp. 35-41 |
||||||||
| 16. | Organic filler from golden apple snails shells to improve the silicone rubber insulator properties | Suksri, A. | 2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 17. | Simulation of photovoltaic module configuration for different shaded patterns | Suksri, A. Wongwuttanasatian, T. |
2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 18. | Temperature compensation of photovoltaic cell using phase change materials | Sarikarin, T. Suksri, A. Wongwuttanasatian, T. |
2018 |
International Journal of Engineering and Technology(UAE) 3.7 Special Issue 7 (7), pp. 179-181 |
||||||||
| 19. | Cooling enhancement of photovoltaic cell via the use of phase change materials in a different designed container shape | Wongwuttanasatian, T. Suksri, A. |
2019 |
IOP Conference Series: Earth and Environmental Science 1 (257), pp. |
||||||||
| 20. | Minimization of losses in solar photovoltaic modules by reconfiguration under various patterns of partial shading | , Suksri, A. Wongwuttanasatian, T. |
2019 |
Energies 1 (12), pp. |
||||||||
| 21. | The effect of electric field on glycerine sedimentation and reaction acceleration using multiple high voltage electrodes designed for biodiesel production | Wongwuttanasatian, T. Suksri, A. |
2019 |
IOP Conference Series: Earth and Environmental Science 1 (257), pp. |
||||||||
| 22. | Effects of micro-eggshells filler on tracking and erosion resistance of silicone rubber composites | Wongwuttanasatian, T. Suksri, A. |
2020 |
Key Engineering Materials (846 KEM), pp. 37-41 |
||||||||
| 23. | Glycerin Separation from Biodiesel Transesterification Process by Pulsed Electric Field with Specific Pulse Forming Network | Hinthao, T. Wongwuttanasatian, T. Kampeerawat, W. Suksri, A. |
2020 |
IOP Conference Series: Materials Science and Engineering 1 (859), pp. |
||||||||
| 24. | Impact of pulsed electric field on glycerin sedimentation from biodiesel production process | Wongwuttanasatian, T. Suksri, A. |
2020 |
Key Engineering Materials (846 KEM), pp. 262-266 |
||||||||
| 25. | Multi-electrode Designed Shape for Small Scale Plasma Incinerator | Kongphet, G. Wongwuttanasatian, T. Suksri, A. |
2020 |
IOP Conference Series: Materials Science and Engineering 1 (859), pp. |
||||||||
| 26. | Performance enhancement of a photovoltaic module by passive cooling using phase change material in a finned container heat sink | Wongwuttanasatian, T. Suksri, A. |
2020 |
Solar Energy (195), pp. 47-53 |
||||||||
| 27. | The Effect of Micro-Eggshells and Aluminium Hydroxide on Tracking Resistance of Silicone Rubber Composite | Khaigunha, P. Wongwuttanasatian, T. Suksri, A. |
2020 |
IOP Conference Series: Materials Science and Engineering 1 (859), pp. |
||||||||
| 28. | A Study on an Impact of Tower Surge Impedance against Lightning Surge Phenomena | Chatthaworn, R. Suksri, A. |
2021 |
IOP Conference Series: Earth and Environmental Science 1 (812), pp. |
||||||||
| 29. | Electrical breakdown voltage of palm oil and nano graphene filler in nanofluids application on transformer insulating oil | Suksri, A. | 2021 |
Key Engineering Materials (902 KEM), pp. 59-63 |
||||||||
| 30. | An adaptive control strategy for VSG with reduced size energy storage system | Jongudomkarn, J. Suksri, A. |
2022 |
19th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, ECTI-CON 2022 (), pp. |
||||||||
| 31. | Back flashover mitigation for transmission tower by parallel additional multiple conductors from tower top to ground footage to alter the surge impedance | Satchathampitak, C. Chatthaworn, R. Suksri, A. |
2022 |
Energy Reports (8), pp. 505-510 |
||||||||
| 32. | Efficiency improvement of PV module using a binary-organic eutectic phase change material in a finned container | Homlakorn, S. Suksri, A. Wongwuttanasatian, T. |
2022 |
Energy Reports (8), pp. 121-128 |
||||||||
| 33. | Electrode Shape Design and Current Density Distribution for Stable Plasma Beam Incinerator | Kongphet, G. Wongwuttanasatian, T. Suksri, A. |
2022 |
Lecture Notes in Mechanical Engineering (), pp. 45-51 |
||||||||
| 34. | Graphene Nanoplatelets Effect on Electrical Tree Inhibition in Epoxy Resin Insulator | Khaibuth, P. Suksri, A. |
2022 |
Key Engineering Materials (931), pp. 17-23 |
||||||||
| 35. | Long Term Thermal Performance of Palm Oil and Nano Graphene Filler in Nanofluids Application on Transformer Insulating Oil and Electrical Breakdown Voltage | Wajanasoonthon, K. Suksri, A. |
2022 |
Key Engineering Materials (931), pp. 9-15 |
||||||||
| 36. | Comparative study for photovoltaic cooling using metal mesh inserted eutectic phase change material enclosure | Homlakorn, S. | 2023 |
Case Studies in Thermal Engineering (45), pp. |
||||||||
| 37. | A Pilot–Scale Continuous Torrefier for Bagasse Quality Improvement in a Biomass Powerplant | Pajampa, K. Suksri, A. Wongwuttanasatian, T. |
2024 |
Springer Proceedings in Earth and Environmental Sciences (Part F2160), pp. 128-136 |
||||||||
| 38. | Thermal management of photovoltaic module using affordable organic phase change material combined with nano metal oxide particles enhancer | Phukaokaew, W. Suksri, A. Punyawudho, K. |
2024 |
Heliyon 24 (10), pp. |
||||||||
| 39. | Optimisation of flow configuration for PVT system assisted by MgO nanoparticles PCM cooling | Phukaokaew, W. Suksri, A. Punyawudho, K. |
2025 |
Energy Nexus (17), pp. |
||||||||
| Title | Authors | Year | Journal title |
|---|
| Title | Authors | Year | Journal title | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | Total | ||||||
| 1. | The Design and Optimization of Combined Rogowski Coil Based on Printed Circuit Board | Pongchit Saetang Amnart Suksri |
2016 |
2016 3RD INTERNATIONAL CONFERENCE ON MANUFACTURING AND INDUSTRIAL TECHNOLOGIES (70.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 2. | Effect of partial shading patterns and degrees of shading on Total Cross-Tied (TCT) photovoltaic array configuration | Chayut Tubniyom Watcharin Jaideaw Rongrit Chatthaworn Amnart Suksri Tanakorn Wongwuttanasatian |
2018 |
5TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT RESEARCH (ICEER 2018) (153.0), pp. 35.0-41.0 |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
| 3. | Organic filler from golden apple snails shells to improve the silicone rubber insulator properties | Sujirat Tepsila Amnart Suksri |
2018 |
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 4. | Simulation of photovoltaic module configuration for different shaded patterns | Watcharin Jaideaw Amnart Suksri Tanakorn Wongwuttanasatian |
2018 |
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp. |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
| 5. | Cooling enhancement of photovoltaic cell via the use of phase change materials in a different designed container shape | Tachakun Sarikarin Tanakorn Wongwuttanasatian Amnart Suksri |
2019 |
2019 9TH INTERNATIONAL CONFERENCE ON FUTURE ENVIRONMENT AND ENERGY (257.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 6. | Minimization of Losses in Solar Photovoltaic Modules by Reconfiguration under Various Patterns of Partial Shading | Chayut Tubniyom Rongrit Chatthaworn Amnart Suksri Tanakorn Wongwuttanasatian |
2019 |
ENERGIES 1.0 (12.0), pp. |
15 | 0 | 0 | 0 | 0 | 0 | 15 | |
| 7. | The effect of electric field on glycerine sedimentation and reaction acceleration using multiple high voltage electrodes designed for biodiesel production | Tharin Ratanabuntha Tanakorn Wongwuttanasatian Amnart Suksri |
2019 |
2019 9TH INTERNATIONAL CONFERENCE ON FUTURE ENVIRONMENT AND ENERGY (257.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| Title | Authors | Year | Journal title | ||
|---|---|---|---|---|---|
| 1. | Electrical Leakage Current on 22 k V Porcelain Insulators Tested under Saline Solution | Amnart Suksri Kittipong Tonmitra Kongchuk Boontun |
2003 |
KKU ENGINEERING JOURNAL 4 (30), pp. 379-389 |
|
| 2. | Optimal Shunt Capacitor Sizing and Location on the Electrical Radial Distribution System with Microsoft Excel Solver | Vorasak Nirukkanaporn Jittipath Triyangkulsri Amnart Suksri Cheiwchan Nethan |
2005 |
KKU ENGINEERING JOURNAL 6 (32), pp. 813-827 |
|
| 3. | HVDC Bridge Generator Feeded by a Current Source From Series Resonant Converter | Kitipong Tonmitra Chaiporn Addoddorn Amnart Suksri |
2005 |
KKU ENGINEERING JOURNAL 3 (32), pp. 391-401 |
|
| 4. | A comparison on leakage current of 22 kV porcelain insulator by using rotating wheel tester with high voltage AC and impulse voltage excitation | Bounthanh Banhthasit Kittipong Tonmitra Amnart Suksri Arkom Kaewrawang Mongkol Leeparkobboon |
2011 |
KKU ENGINEERING JOURNAL 3 (38), pp. 297-304 |
| Title | Authors | NRIIS type | Year | NRIIS Scholarship | ||
|---|---|---|---|---|---|---|
| 1. | การผลิตเชื้อเพลิงเม็ดจากฟิลเตอร์เค้ก (filter cake pellet) สำหรับหม้อไอน้ำ เพื่อเปลี่ยนจากของเสียเป็นพลังงาน |
รศ.ดร. ธนากร วงศ์วัฒนาเสถียร ศ.ดร. ทนงเกียรติ เกียรติศิริโรจน์ ศ.ดร. ผดุงศักดิ์ รัตนเดโช รศ.ดร. ดร เพ็ญจิตร รศ.ดร. อำนาจ สุขศรี ผศ.ดร. กิตติพงษ์ ลาลุน ผศ.ดร. ธัญลักษณ์ ราษฎร์ภักดี ผศ.ดร. ดร ณัญธิวัฒน์ ผศ.ดร. ดร สุรพล อ. ดร ระชา |
โครงการ | 2562 | ทุนงบประมาณแผ่นดินประจำปี 2562 (งบบูรณาการวิจัยและนวัตกรรม) |