Loading
Prof.Dr. sujin Bureerat

Prof.Dr. sujin Bureerat

ภาควิชาวิศวกรรมเครื่องกล,
Faculty of Engineering,
Khon Kaen University
14063067200: H-INDEX 39

Documents

TCI อ้างอิงจาก http://www.tci-thaijo.org/

0

SCOPUS

0

PUBMED

0

ISI

0

TCI

Title Author Year SCOPUS PUBMED ISI TCI
1. Evolutionary methods for the optimisation of engineering systems Bureerat, S. 1998
2. An artificial neural network for detection of simulated dental caries Suwadee Kositbowornchai
Sanphet Siriteptawee
Supattra Plermkamon
Sujin Bureerat
Danaipong Chetchotsak
2006
3. Performance enhancement of evolutionary search for structural topology optimisation S Bureerat
J Limtragool
2006
4. Topological design of structures using population-based optimization methods S. Bureerat
T. Kunakote
2006
5. Comparison of Signal Processing Techniques for Fault Detection in Helical Spur Gears Setthapong Hamcumpai
Khon Kaen Ubonratana DAM
Sujin Bureerat
Nawapak Eua-Anant
Thailand 40002
2007
6. Passive vibration suppression of a walking tractor handlebar structure using multiobjective PBIL Kanyakam, S.
Bureerat, S.
2007
7. Population-based incremental learning for multiobjective optimisation Bureerat, S.
Sriworamas, K.
2007
8. Geometrical design of plate-fin heat sinks using hybridization of MOEA and RSM Sungkom Srisompom
Sujin Bureerat
2008
9. Structural topology optimisation using simulated annealing with multiresolution design variables Sujin Bureerat
Jumlong Limtragool
2008
10. Effect of bearing sleeve lead-in chamfer, and parallelism on tolerance ring installation Piriyakorn Jirawattanakasem
Sujin Bureerat
2010
11. Evaluation of Head Stack Assembly Pitch Static Attitude by Means of Finite Element Analysis: A Case Study of 2.5-in Hard Disk Drives Rattaphom Khlaiaksorn
Sujin Bureerat
Thailand Khon Kaen University
2010
12. Material Identification of a Bridge Carrier Using Finite Element Analysis Nantiwat Pholdee
Sujin Bureerat
2010
13. Optimum plate-fin heat sinks by using a multi-objective evolutionary algorithm Bureerat, S.
Srisomporn, S.
2010
14. Prediction of Head Stack Assembly Gram Load Using Finite Element Analysis Khemakorn Chaloemsri
Sujin Bureerat
Thailand Khon Kaen University
2010
15. Effect of actuating forces on aeroelastic characteristics of a morphing aircraft wing Sleesongsom, S.
Bureerat, S.
2011
16. Hybrid population-based incremental learning using real codes Bureerat, S. 2011
17. Improved population-based incremental learning in continuous spaces Bureerat, S. 2011
18. MULTIOBJECTIVE EVOLUTIONARY OPTIMIZATION OF SPLAYED PIN-FIN HEAT SINK Kanyakam, S.
Bureerat, S.
2011
19. Multi-objective topology optimization using evolutionary algorithms Kunakote, T.
Bureerat, S.
2011
20. Optimal design of a pin-fin heat sink using a surrogate-assisted multiobjective evolutionary algorithm Kanyakam, S.
Bureerat, S.
2011
21. Simultaneous topology, shape and sizing optimisation of a three-dimensional slender truss tower using multiobjective evolutionary algorithms Norapat Noilublao
Sujin Bureerat
2011
22. Topology and sizing optimization of trusses with adaptive ground finite elements using multiobjective PBIL Noilublao, C.
Bureerat, S.
2011
23. Comparative performance of surrogate-assisted MOEAs for geometrical design of pin-fin heat sinks Siwadol Kanyakam
Sujin Bureerat
2012
24. Maximizing volumetric efficiency of a diesel engine using an air pump to compress air-biogas mixture into the engine via venturi Bureerat, S. 2012
25. Multiobjective optimization of a pin-fin heat sink using evolutionary algorithms Siwadol Kanyakam
Sujin Bureerat
2012
26. Multi-stage design of an automotive component Adulyasak Boonpan
Sujin Bureerat
2012
27. Optimization of a triangular slot shape in a tire tread block by using the finite element analysis and MPSO Dolwichai, T.
Limtragool, J.
Bureerat, S.
2012
28. Performance enhancement of multiobjective evolutionary optimisers for truss design using an approximate gradient Nantiwat Pholdee
Sujin Bureerat
2012
29. Surrogate-assisted evolutionary optimizers for multiobjective design of a torque arm structure Pholdee, N.
Bureerat, S.
2012
30. Aircraft morphing wing design by using partial topology optimization Sleesongsom, S.
Bureerat, S.
2013
31. Antioptimisation of trusses using two-level population-based incremental learning Phinit Tontragunrat
Sujin Bureerat
2013
32. Energy saving for an evaporative air-conditioning system in a poultry house by a season mode controller Senawong, K.
Bureerat, S.
Radpukdee, T.
2013
33. Enhanced efficiency of a diesel engine for biogas by using a two-plain venturi Wichettapong, K.
Bureerat, S.
2013
34. Hybridisation of real-code population-based incremental learning and differential evolution for multiobjective design of trusses Nantiwat Pholdee
Sujin Bureerat
2013
35. New conceptual design of aeroelastic wing structures by multi-objective optimization S. Sleesongsom
S. Bureerat
2013
36. Simultaneous topology and sizing optimization of a water distribution network using a hybrid multiobjective evolutionary algorithm Bureerat, S.
Sriworamas, K.
2013
37. Simultaneous topology, shape, and sizing optimisation of plane trusses with adaptive ground finite elements using MOEAs Norapat Noilublao
Sujin Bureerat
2013
38. Sugarcane harvest scheduling for maximizing total sugar yield Sethanan, K.
Theerakulpisut, S.
Taechasook, P.
Neungmatcha, W.
Bureerat, S.
2013
39. Surrogate-assisted multiobjective evolutionary algorithms for structural shape and sizing optimisation Tawatchai Kunakote
Sujin Bureerat
2013
40. Comparative performance of meta-heuristic algorithms for mass minimisation of trusses with dynamic constraints Nantiwat Pholdee
Sujin Bureerat
2014
41. Differential evolution algorithm for solving a nonlinear single pendulum problem Panagant, N.
Bureerat, S.
2014
42. Effects of an injection angle of water pipes in an ultrasonic cleaning tank on particle disposal capability Wongmanee, K.
Bureerat, S.
2014
43. Hybrid real-code ant colony optimisation for constrained mechanical design Pholdee, N.
Bureerat, S.
2014
44. Hybrid real-code population-based incremental learning and approximate gradients for multi-objective truss design Pholdee, N.
Bureerat, S.
2014
45. Preface Bureerat, S. 2014
46. Solving Partial Differential Equations Using a New Differential Evolution Algorithm Panagant, N.
Bureerat, S.
2014
47. An efficient optimum Latin hypercube sampling technique based on sequencing optimisation using simulated annealing Pholdee, N.
Bureerat, S.
2015
48. Efficient hybrid evolutionary algorithm for optimization of a strip coiling process Nantiwat Pholdee
Won-Woong Park
Dong-Kyu Kim
Yong-Taek Im
Sujin Bureerat
Hyuck-Cheol Kwon
Myung-Sik Chun
2015
49. Flutter Analysis of Aircraft Wing Using an Alternative Reduced-order Modeling Method S. Sleesongsom
S. Winyangkul
S. Bureerat
2015
50. Morphing wing structural optimization using opposite-based population-based incremental learning and multigrid ground elements S. Sleesongsom
S. Bureerat
2015
51. Optimization of Flatness of Strip during Coiling Process based on Evolutionary Algorithms Pholdee, N.
Bureerat, S.
Kwon, H.
Chun, M.
2015
52. Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms Nantiwat Pholdee
Hyun Moo Baek
Sujin Bureerat
Yong-Taek Im
2015
53. Surrogate Assisted Teaching Learning Based Optimisation for Process Design of a Non-circular Drawing Sequence N. Pholdee
S. Bureerat
H. M. Baek
Y. -T. Im
2015
54. An Improved Teaching-Learning Based Optimization for Optimization of Flatness of a Strip During a Coiling Process Sujin Bureerat
Nantiwat Pholdee
Won-Woong Park
Dong-Kyu Kim
2016
55. Examination of three meta-heuristic algorithms for optimal design of planar steel frames Ghanshyam G. Tejani
Vishwesh H. Bhensdadia
Sujin Bureerat
2016
56. Hybrid real-code ant colony optimisation for constrained mechanical design Pholdee, N.
Bureerat, S.
2016
57. Hybrid TLBO and BFGS for structural health monitoring optimisation problems Nantiwat Pholdee
Sujin Bureerat
2016
58. Multiobjective optimization of a steering linkage S. Sleesongsom
S. Bureerat
2016
59. Optimal Truss Sizing Using an Adaptive Differential Evolution Algorithm Bureerat, S.
Pholdee, N.
2016
60. Structural health monitoring through meta-heuristics - comparative performance study Nantiwat Pholdee
Sujin Bureerat
2016
61. Adaptive sine cosine algorithm integrated with differential evolution for structural damage detection Sujin Bureerat
Nantiwat Pholdee
2017
62. Estimation of Distribution Algorithm Using Correlation between Binary Elements: A New Binary-Code Metaheuristic Pholdee, N.
Bureerat, S.
2017
63. Four-bar linkage path generation through self-adaptive population size teaching-learning based optimization Sleesongsom, S.
Bureerat, S.
2017
64. Hybrid real-code population-based incremental learning and differential evolution for many-objective optimisation of an automotive floor-frame Nantiwat Pholdee
Sujin Bureerat
Ali Riza Yildiz
2017
65. Many-objective optimisation of trusses through meta-heuristics Nantiwat Pholdee
Sujin Bureerat
Papot Jaroenapibal
Thana Radpukdee
2017
66. Meta-heuristics for engineering optimisation - Applications to metal forming processes Pholdee, N.
Bureerat, S.
2017
67. Optimal reactive power dispatch problem using a two-archive multi-objective grey wolf optimizer Kasem Nuaekaew
Pramin Artrit
Nantiwat Pholdee
Sujin Bureerat
2017
68. Optimal U-shaped baffle square-duct heat exchanger through surrogate-assisted self-adaptive differential evolution with neighbourhood search and weighted exploitation-exploration Kittinan Wansaseub
Nantiwat Pholdee
Sujin Bureerat
2017
69. Optimum design of a walking tractor handlebar through many-objective optimisation Bureerat, S.
Pholdee, N.
2017
70. Optimum radii and heights of U-shaped baffles in a square duct heat exchanger using surrogate-assisted optimization Pholdee, N.
Bureerat, S.
2017
71. Topology, shape, and size optimization of truss structures using modified teaching-learning based optimization Bureerat, S. 2017
72. Two-stage surrogate assisted differential evolution for optimization of a non-circular drawing sequence Nantiwat Pholdee
Sujin Bureerat
Hyun Moo Baek
Yong-Taek Im
2017
73. A Comparative Study of Eighteen Self-adaptive Metaheuristic Algorithms for Truss Sizing Optimisation Nantiwat Pholdee
Sujin Bureerat
2018
74. ADOSH: software with graphic user interface for analysis and design of truss structures Panagant, N.
Bureerat, S.
2018
75. Alternative Constraint Handling Technique for Four-Bar Linkage Path Generation Sleesongsom, S.
Bureerat, S.
2018
76. Design and Development of a Threading Machine for Tobacco Leaves Ranaporn Senasutham
Sujin Bureerat
Juckamas Laohavanich
Cherdpong Chiawchanwattana
Suphan Yangyuen
2018
77. Development of frame finite element model for truss structures with semi-rigid connections Panagant, N.
Bureerat, S.
2018
78. Inverse problem based differential evolution for efficient structural health monitoring of trusses Bureerat, S.
Pholdee, N.
2018
79. Multi-mutation scheme adaptive differential evolution for solving truss sizing optimization Panagant, N.
Bureerat, S.
2018
80. Multiobjective adaptive symbiotic organisms search for truss optimization problems Pholdee, N.
Bureerat, S.
2018
81. Multiobjective Simultaneous Topology, Shape and Sizing Optimization of Trusses Using Evolutionary Optimizers Panagant, N.
Pholdee, N.
Bureerat, S.
2018
82. Multiobjective trajectory planning of a 6D robot based on multiobjective meta heuristic search Nantiwat Pholdee
Sujin Bureerat
2018
83. Optimal Synthesis of Four-Bar Linkage Path Generation through Evolutionary Computation with a Novel Constraint Handling Technique Sleesongsom, S.
Bureerat, S.
2018
84. Optimisation of flight dynamic control based on many-objectives meta-heuristic: A comparative study Sujin Bureerat
Nantiwat Pholdee
Thana Radpukdee
2018
85. Optimization of steering linkage including the effect of McPherson strut front suspension Sleesongsom, S.
Bureerat, S.
2018
86. Optimum design of a hand-tractor handlebar through metaheuristic algorithms Apichit Mahachai
Sujin Bureerat
Nantiwat Pholdee
2018
87. Solving Inverse Kinematics of Robot Manipulators by Means of Meta-Heuristic Optimisation Kritsada Wichapong
Sujin Bureerat
Nantiwat Pholdee
2018
88. Synthesis of multiple cross-section pin fin heat sinks using multiobjective evolutionary algorithms Bureerat, S. 2018
89. Topology and Size Optimization of Trusses with Static and Dynamic Bounds by Modified Symbiotic Organisms Search Ghanshyam G. Tejani
Vimal J. Savsani
Sujin Bureerat
Vivek K. Patel
2018
90. Topology Optimisation Using MPBILs and Multi-Grid Ground Element Sleesongsom, S.
Bureerat, S.
2018
91. Trajectory Planning of a 6D Robot based on Meta Heuristic Algorithms Pholdee, N.
Bureerat, S.
Radpukdee, T.
2018
92. Truss topology, shape and sizing optimization by fully stressed design based on hybrid grey wolf optimization and adaptive differential evolution Natee Panagant
Sujin Bureerat
2018
93. Vibration suppression of a single-cylinder engine by means of multi-objective evolutionary optimisation Suwin Sleesongsom
Sujin Bureerat
2018
94. Alternative Constraint Handling Technique for Four-Bar Linkage Motion Generation Sleesongsom, S.
Bureerat, S.
2019
95. A new hybrid Harris hawks-Nelder-Mead optimization algorithm for solving design and manufacturing problems Bureerat, S.
Pholdee, N.
2019
96. A novel self-adaptive hybrid multi-objective meta-heuristic for reliability design of trusses with simultaneous topology, shape and sizing optimisation design variables Panagant, N.
Bureerat, S.
2019
97. Design and Development of a Threading Machine for Tobacco Leaves Bureerat, S.
Laohavanich, J.
Chiawchanwattana, C.
Yangyuen, S.
2019
98. Multi-objective optimization of a steering linkage using alternative objective functions Sleesongsom, S.
Bureerat, S.
2019
99. Self-adaptive MRPBIL-DE for 6D robot multiobjective trajectory planning Sujin Bureerat
Nantiwat Pholdee
Thana Radpukdee
Papot Jaroenapibal
2019
100. Simultaneous topology, shape, and size optimization of trusses, taking account of uncertainties using multi-objective evolutionary algorithms Teerapol Techasen
Kittinan Wansasueb
Natee Panagant
Nantiwat Pholdee
Sujin Bureerat
2019
101. Structural optimization using multi-objective modified adaptive symbiotic organisms search Ghanshyam G. Tejani
Nantiwat Pholdee
Sujin Bureerat
Doddy Prayogo
Amir H. Gandomi
2019
102. Synthesis of four-bar linkage motion generation using optimization algorithms Sleesongsom, S.
Panagant, N.
Bureerat, S.
2019
103. Topology optimization of truss subjected to static and dynamic constraints by integrating simulated annealing into passing vehicle search algorithms Ghanshyam G. Tejani
Vimal J. Savsani
Sujin Bureerat
Vivek K. Patel
Poonam Savsani
2019
104. An Approach Combining an Efficient and Global Evolutionary Algorithm with a Gradient-Based Method for Airfoil Design Problems Bureerat, S. 2020
105. A novel hybrid Harris hawks-simulated annealing algorithm and RBF-based metamodel for design optimization of highway guardrails Dies Kurtulus
Ali Riza Yildiz
Sadiq M. Sait
Sujin Bureerat
Khon Kaen
2020
106. A novel hybridized metaheuristic technique in enhancing the diagnosis of cross-sectional dent damaged offshore platform members Pholdee, N.
Bureerat, S.
2020
107. Butterfly optimization algorithm for optimum shape design of automobile suspension components Betul Sultan Yildiz
Ali Riza Yildiz
Emre Isa Albak
Hammoudi Abderazek
Sadiq M. Sait
Sujin Bureerat
2020
108. Constraint handling technique for four-bar linkage path generation using self-adaptive teaching-learning-based optimization with a diversity archive Sujin Bureerat
Suwin Sleesongsom
2020
109. Constraint handling technique for four-bar linkage path generation using self-adaptive teaching–learning-based optimization with a diversity archive Bureerat, S.
Sleesongsom, S.
2020
110. Effects of tool coatings on energy consumption in micro-extrusion of aluminum alloy 6063 Sucharitpwatskul, S.
Mahayotsanun, N.
Bureerat, S.
2020
111. Multi-objective modified heat transfer search for truss optimization Sumit Kumar
Ghanshyam G. Tejani
Nantiwat Pholdee
Sujin Bureerat
2020
112. Optimum design of an air suspension seat using recent structural optimization techniques Bureerat, S. 2020
113. Self-adaptive many-objective meta-heuristic based on decomposition for many-objective conceptual design of a fixed wing unmanned aerial vehicle Pakin Champasak
Natee Panagant
Nantiwat Pholdee
Sujin Bureerat
Ali Riza Yildiz
2020
114. Surrogate-Assisted Reliability Optimisation of an Aircraft Wing with Static and Dynamic Aeroelastic Constraints Sleesongsom, S.
Panagant, N.
Pholdee, N.
Bureerat, S.
2020
115. The Henry gas solubility optimization algorithm for optimum structural design of automobile brake components Pholdee, N.
Bureerat, S.
2020
Count 100 1 80 5

Title Authors Year Publication name Cited count
< 2015 2016 2017 2018 2019 2020 Total
1. Evolutionary methods for the optimisation of engineering systems Bureerat, S. 1998 IEE Colloquium (Digest)
521 (), pp. 1/1-1/6
2. An artificial neural network for detection of simulated dental caries Kositbowornchai, S.
Siriteptawee, S.
Plermkamon, S.
Bureerat, S.
Chetchotsak, D.
2006 International Journal of Computer Assisted Radiology and Surgery
2 (1), pp. 91-96
3. Performance enhancement of evolutionary search for structural topology optimisation Bureerat, S.
Limtragool, J.
2006 Finite Elements in Analysis and Design
6 (42), pp. 547-566
4. Topological design of structures using population-based optimization methods Bureerat, S.
Kunakote, T.
2006 Inverse Problems in Science and Engineering
6 (14), pp. 589-607
5. Passive vibration suppression of a walking tractor handlebar structure using multiobjective PBIL Kanyakam, S.
Bureerat, S.
2007 2007 IEEE Congress on Evolutionary Computation, CEC 2007
(), pp. 4162-4169
6. Population-based incremental learning for multiobjective optimisation Bureerat, S.
Sriworamas, K.
2007 Advances in Soft Computing
(39), pp. 223-232
7. Geometrical design of plate-fin heat sinks using hybridization of MOEA and RSM Srisomporn, S.
Bureerat, S.
2008 IEEE Transactions on Components and Packaging Technologies
2 SPEC. ISS. (31), pp. 351-360
8. Structural topology optimisation using simulated annealing with multiresolution design variables Bureerat, S.
Limtragool, J.
2008 Finite Elements in Analysis and Design
12-13 (44), pp. 738-747
9. Optimum plate-fin heat sinks by using a multi-objective evolutionary algorithm Bureerat, S.
Srisomporn, S.
2010 Engineering Optimization
4 (42), pp. 305-323
10. Effect of actuating forces on aeroelastic characteristics of a morphing aircraft wing Sleesongsom, S.
Bureerat, S.
2011 Applied Mechanics and Materials
(52-54), pp. 308-317
11. Hybrid population-based incremental learning using real codes Bureerat, S. 2011 Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
(6683 LNCS), pp. 379-391
12. Improved population-based incremental learning in continuous spaces Bureerat, S. 2011 Advances in Intelligent and Soft Computing
(96 AISC), pp. 77-86
13. Multiobjective evolutionary optimization of splayed pin-fin heat sink Kanyakam, S.
Bureerat, S.
2011 Engineering Applications of Computational Fluid Mechanics
4 (5), pp. 553-565
14. Multi-objective topology optimization using evolutionary algorithms Kunakote, T.
Bureerat, S.
2011 Engineering Optimization
5 (43), pp. 541-557
15. Optimal design of a pin-fin heat sink using a surrogate-assisted multiobjective evolutionary algorithm Kanyakam, S.
Bureerat, S.
2011 Advanced Materials Research
(308-310), pp. 1122-1128
16. Simultaneous topology, shape and sizing optimisation of a three-dimensional slender truss tower using multiobjective evolutionary algorithms Noilublao, N.
Bureerat, S.
2011 Computers and Structures
23-24 (89), pp. 2531-2538
17. Topology and sizing optimization of trusses with adaptive ground finite elements using multiobjective PBIL Noilublao, C.
Bureerat, S.
2011 Advanced Materials Research
(308-310), pp. 1116-1121
18. Comparative performance of surrogate-assisted MOEAs for geometrical design of pin-fin heat sinks Kanyakam, S.
Bureerat, S.
2012 Journal of Applied Mathematics
(2012), pp.
19. Maximizing volumetric efficiency of a diesel engine using an air pump to compress air-biogas mixture into the engine via venturi Bureerat, S. 2012 Applied Mechanics and Materials
(148-149), pp. 1051-1057
20. Multiobjective optimization of a pin-fin heat sink using evolutionary algorithms Kanyakam, S.
Bureerat, S.
2012 Journal of Electronic Packaging, Transactions of the ASME
2 (134), pp.
21. Multi-stage design of an automotive component Boonpan, A.
Bureerat, S.
2012 International Journal of Vehicle Design
1-2 (60), pp. 84-99
22. Optimization of a triangular slot shape in a tire tread block by using the finite element analysis and MPSO Dolwichai, T.
Limtragool, J.
Bureerat, S.
2012 Advanced Materials Research
(505), pp. 424-428
23. Performance enhancement of multiobjective evolutionary optimisers for truss design using an approximate gradient Pholdee, N.
Bureerat, S.
2012 Computers and Structures
(106-107), pp. 115-124
24. Surrogate-assisted evolutionary optimizers for multiobjective design of a torque arm structure Pholdee, N.
Bureerat, S.
2012 Applied Mechanics and Materials
(101-102), pp. 324-328
25. Aircraft morphing wing design by using partial topology optimization Sleesongsom, S.
Bureerat, S.
2013 Structural and Multidisciplinary Optimization
6 (48), pp. 1109-1128
26. Antioptimisation of trusses using two-level population-based incremental learning Tontragunrat, P.
Bureerat, S.
2013 Journal of Applied Mathematics
(2013), pp.
27. Energy saving for an evaporative air-conditioning system in a poultry house by a season mode controller Senawong, K.
Bureerat, S.
Radpukdee, T.
2013 Advanced Science Letters
11 (19), pp. 3280-3284
28. Enhanced efficiency of a diesel engine for biogas by using a two-plain venturi Wichettapong, K.
Bureerat, S.
2013 Advanced Science Letters
11 (19), pp. 3257-3259
29. Hybridisation of real-code population-based incremental learning and differential evolution for multiobjective design of trusses Pholdee, N.
Bureerat, S.
2013 Information Sciences
(223), pp. 136-152
30. New conceptual design of aeroelastic wing structures by multi-objective optimization Sleesongsom, S.
Bureerat, S.
2013 Engineering Optimization
1 (45), pp. 107-122
31. Simultaneous topology and sizing optimization of a water distribution network using a hybrid multiobjective evolutionary algorithm Bureerat, S.
Sriworamas, K.
2013 Applied Soft Computing Journal
8 (13), pp. 3693-3702
32. Simultaneous topology, shape, and sizing optimisation of plane trusses with adaptive ground finite elements using MOEAs Noilublao, N.
Bureerat, S.
2013 Mathematical Problems in Engineering
(2013), pp.
33. Sugarcane harvest scheduling for maximizing total sugar yield Sethanan, K.
Theerakulpisut, S.
Taechasook, P.
Neungmatcha, W.
Bureerat, S.
2013 Advanced Science Letters
10 (19), pp. 3122-3125
34. Surrogate-assisted multiobjective evolutionary algorithms for structural shape and sizing optimisation Kunakote, T.
Bureerat, S.
2013 Mathematical Problems in Engineering
(2013), pp.
35. Comparative performance of meta-heuristic algorithms for mass minimisation of trusses with dynamic constraints Pholdee, N.
Bureerat, S.
2014 Advances in Engineering Software
(75), pp. 1-13
36. Differential evolution algorithm for solving a nonlinear single pendulum problem Panagant, N.
Bureerat, S.
2014 Advanced Materials Research
(931-932), pp. 1129-1133
37. Effects of an injection angle of water pipes in an ultrasonic cleaning tank on particle disposal capability Wongmanee, K.
Bureerat, S.
2014 Advanced Materials Research
(931-932), pp. 1134-1138
38. Hybrid real-code ant colony optimisation for constrained mechanical design Pholdee, N.
Bureerat, S.
2014 International Journal of Systems Science
(), pp.
39. Hybrid real-code population-based incremental learning and approximate gradients for multi-objective truss design Pholdee, N.
Bureerat, S.
2014 Engineering Optimization
8 (46), pp. 1032-1051
40. Preface Bureerat, S. 2014 Advanced Materials Research
(931-932), pp. 1
41. Solving partial differential equations using a new differential evolution algorithm Panagant, N.
Bureerat, S.
2014 Mathematical Problems in Engineering
(2014), pp.
42. An efficient optimum Latin hypercube sampling technique based on sequencing optimisation using simulated annealing Pholdee, N.
Bureerat, S.
2015 International Journal of Systems Science
10 (46), pp. 1780-1789
43. Efficient hybrid evolutionary algorithm for optimization of a strip coiling process Pholdee, N.
Bureerat, S.
Kwon, H.
Chun, M.
2015 Engineering Optimization
4 (47), pp. 521-532
44. Morphing wing structural optimization using opposite-based population-based incremental learning and multigrid ground elements Sleesongsom, S.
Bureerat, S.
2015 Mathematical Problems in Engineering
(2015), pp.
45. Optimization of flatness of strip during coiling process based on evolutionary algorithms Pholdee, N.
Bureerat, S.
Kwon, H.
Chun, M.
2015 International Journal of Precision Engineering and Manufacturing
7 (16), pp. 1493-1499
46. Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms Pholdee, N.
Baek, H.
Bureerat, S.
2015 Journal of Mechanical Science and Technology
8 (29), pp. 3427-3436
47. Hybrid real-code ant colony optimisation for constrained mechanical design Pholdee, N.
Bureerat, S.
2016 International Journal of Systems Science
2 (47), pp. 474-491
48. Optimal Truss Sizing Using an Adaptive Differential Evolution Algorithm Bureerat, S.
Pholdee, N.
2016 Journal of Computing in Civil Engineering
2 (30), pp.
49. Adaptive sine cosine algorithm integrated with differential evolution for structural damage detection Bureerat, S.
Pholdee, N.
2017 Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
(10404 10404 LNCS), pp. 71-86
50. Estimation of Distribution Algorithm Using Correlation between Binary Elements: A New Binary-Code Metaheuristic Pholdee, N.
Bureerat, S.
2017 Mathematical Problems in Engineering
(2017), pp.
51. Four-bar linkage path generation through self-adaptive population size teaching-learning based optimization Sleesongsom, S.
Bureerat, S.
2017 Knowledge-Based Systems
(135), pp. 180-191
52. Hybrid real-code population-based incremental learning and differential evolution for many-objective optimisation of an automotive floor-frame Pholdee, N.
Bureerat, S.
2017 International Journal of Vehicle Design
1 (73), pp. 20-53
53. Many-objective optimisation of trusses through meta-heuristics Pholdee, N.
Bureerat, S.
Jaroenapibal, P.
Radpukdee, T.
2017 Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
(10261 LNCS), pp. 143-152
54. Meta-heuristics for engineering optimisation - Applications to metal forming processes Pholdee, N.
Bureerat, S.
2017 Key Engineering Materials
(751), pp. 145-150
55. Optimal reactive power dispatch problem using a two-archive multi-objective grey wolf optimizer Artrit, P.
Pholdee, N.
Bureerat, S.
2017 Expert Systems with Applications
(87), pp. 79-89
56. Optimal U-shaped baffle square-duct heat exchanger through surrogate-assisted self-adaptive differential evolution with neighbourhood search and weighted exploitation-exploration Pholdee, N.
Bureerat, S.
2017 Applied Thermal Engineering
(118), pp. 455-463
57. Optimum design of a walking tractor handlebar through many-objective optimisation Bureerat, S.
Pholdee, N.
2017 Advances in Computational Design
4 (2), pp. 273-281
58. Optimum radii and heights of U-shaped baffles in a square duct heat exchanger using surrogate-assisted optimization Pholdee, N.
Bureerat, S.
2017 Engineering and Applied Science Research
2 (44), pp. 84-89
59. Topology, shape, and size optimization of truss structures using modified teaching-learning based optimization Bureerat, S. 2017 Advances in Computational Design
4 (2), pp. 313-331
60. Two-stage surrogate assisted differential evolution for optimization of a non-circular drawing sequence Pholdee, N.
Bureerat, S.
Baek, H.
2017 International Journal of Precision Engineering and Manufacturing
4 (18), pp. 567-573
61. A Comparative Study of Eighteen Self-adaptive Metaheuristic Algorithms for Truss Sizing Optimisation Pholdee, N.
Bureerat, S.
2018 KSCE Journal of Civil Engineering
8 (22), pp. 2982-2993
62. ADOSH: software with graphic user interface for analysis and design of truss structures Panagant, N.
Bureerat, S.
2018 Asian Journal of Civil Engineering
3 (19), pp. 273-286
63. Alternative Constraint Handling Technique for Four-Bar Linkage Path Generation Sleesongsom, S.
Bureerat, S.
2018 IOP Conference Series: Materials Science and Engineering
1 (324), pp.
64. Development of frame finite element model for truss structures with semi-rigid connections Panagant, N.
Bureerat, S.
2018 Engineering and Applied Science Research
3 (45), pp. 188-195
65. Inverse problem based differential evolution for efficient structural health monitoring of trusses Bureerat, S.
Pholdee, N.
2018 Applied Soft Computing Journal
(66), pp. 462-472
66. Multi-mutation scheme adaptive differential evolution for solving truss sizing optimization Panagant, N.
Bureerat, S.
2018 Asia-Pacific Journal of Science and Technology
3 (23), pp.
67. Multiobjective adaptive symbiotic organisms search for truss optimization problems Pholdee, N.
Bureerat, S.
2018 Knowledge-Based Systems
(161), pp. 398-414
68. Multiobjective Simultaneous Topology, Shape and Sizing Optimization of Trusses Using Evolutionary Optimizers Panagant, N.
Pholdee, N.
Bureerat, S.
2018 IOP Conference Series: Materials Science and Engineering
1 (370), pp.
69. Multiobjective trajectory planning of a 6D robot based on multiobjective meta heuristic search Pholdee, N.
Bureerat, S.
2018 ACM International Conference Proceeding Series
(), pp. 352-356
70. Optimal synthesis of four-bar linkage path generation through evolutionary computation with a novel constraint handling technique Sleesongsom, S.
Bureerat, S.
2018 Computational Intelligence and Neuroscience
(2018), pp.
71. Optimisation of flight dynamic control based on many-objectives meta-heuristic: A comparative study Bureerat, S.
Pholdee, N.
Radpukdee, T.
2018 IOP Conference Series: Materials Science and Engineering
1 (370), pp.
72. Optimization of steering linkage including the effect of McPherson strut front suspension Sleesongsom, S.
Bureerat, S.
2018 Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
(10941 LNCS), pp. 612-623
73. Optimum design of a hand-tractor handlebar through metaheuristic algorithms Bureerat, S.
Pholdee, N.
2018 IOP Conference Series: Materials Science and Engineering
1 (370), pp.
74. Solving Inverse Kinematics of Robot Manipulators by Means of Meta-Heuristic Optimisation Bureerat, S.
Pholdee, N.
2018 IOP Conference Series: Materials Science and Engineering
1 (370), pp.
75. Synthesis of multiple cross-section pin fin heat sinks using multiobjective evolutionary algorithms Bureerat, S. 2018 International Journal of Heat and Mass Transfer
(118), pp. 462-470
76. Topology and Size Optimization of Trusses with Static and Dynamic Bounds by Modified Symbiotic Organisms Search Bureerat, S. 2018 Journal of Computing in Civil Engineering
2 (32), pp.
77. Topology optimisation using MPBILs and multi-grid ground element Sleesongsom, S.
Bureerat, S.
2018 Applied Sciences (Switzerland)
2 (8), pp.
78. Trajectory Planning of a 6D Robot based on Meta Heuristic Algorithms Pholdee, N.
Bureerat, S.
Radpukdee, T.
2018 MATEC Web of Conferences
(220), pp.
79. Truss topology, shape and sizing optimization by fully stressed design based on hybrid grey wolf optimization and adaptive differential evolution Panagant, N.
Bureerat, S.
2018 Engineering Optimization
10 (50), pp. 1645-1661
80. Vibration suppression of a single-cylinder engine by means of multi-objective evolutionary optimisation Sleesongsom, S.
Bureerat, S.
2018 Sustainability (Switzerland)
6 (10), pp.
81. Alternative Constraint Handling Technique for Four-Bar Linkage Motion Generation Sleesongsom, S.
Bureerat, S.
2019 IOP Conference Series: Materials Science and Engineering
1 (501), pp.
82. A new hybrid Harris hawks-Nelder-Mead optimization algorithm for solving design and manufacturing problems Bureerat, S.
Pholdee, N.
2019 Materialpruefung/Materials Testing
8 (61), pp. 735-743
83. A novel self-adaptive hybrid multi-objective meta-heuristic for reliability design of trusses with simultaneous topology, shape and sizing optimisation design variables Panagant, N.
Bureerat, S.
2019 Structural and Multidisciplinary Optimization
5 (60), pp. 1937-1955
84. Design and Development of a Threading Machine for Tobacco Leaves Bureerat, S.
Laohavanich, J.
Chiawchanwattana, C.
Yangyuen, S.
2019 ESIT 2018 - 3rd International Conference on Engineering Science and Innovative Technology, Proceedings
(), pp.
85. Multi-objective optimization of a steering linkage using alternative objective functions Sleesongsom, S.
Bureerat, S.
2019 Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
(11656 LNCS), pp. 47-58
86. Self-adaptive MRPBIL-DE for 6D robot multiobjective trajectory planning Bureerat, S.
Pholdee, N.
Radpukdee, T.
Jaroenapibal, P.
2019 Expert Systems with Applications
(136), pp. 133-144
87. Simultaneous topology, shape, and size optimization of trusses, taking account of uncertainties using multi-objective evolutionary algorithms Panagant, N.
Pholdee, N.
Bureerat, S.
2019 Engineering with Computers
2 (35), pp. 721-740
88. Structural optimization using multi-objective modified adaptive symbiotic organisms search Pholdee, N.
Bureerat, S.
2019 Expert Systems with Applications
(125), pp. 425-441
89. Synthesis of four-bar linkage motion generation using optimization algorithms Sleesongsom, S.
Panagant, N.
Bureerat, S.
2019 Advances in Computational Design
3 (4), pp. 197-210
90. Topology optimization of truss subjected to static and dynamic constraints by integrating simulated annealing into passing vehicle search algorithms Bureerat, S. 2019 Engineering with Computers
2 (35), pp. 499-517
91. An Approach Combining an Efficient and Global Evolutionary Algorithm with a Gradient-Based Method for Airfoil Design Problems Bureerat, S. 2020 Smart Science
(), pp.
92. A novel hybrid Harris hawks-simulated annealing algorithm and RBF-based metamodel for design optimization of highway guardrails Bureerat, S. 2020 Materialpruefung/Materials Testing
3 (62), pp. 251-260
93. A novel hybridized metaheuristic technique in enhancing the diagnosis of cross-sectional dent damaged offshore platform members Pholdee, N.
Bureerat, S.
2020 Computational Intelligence
1 (36), pp. 132-150
94. Constraint handling technique for four-bar linkage path generation using self-adaptive teaching–learning-based optimization with a diversity archive Bureerat, S.
Sleesongsom, S.
2020 Engineering Optimization
(), pp.
95. Effects of tool coatings on energy consumption in micro-extrusion of aluminum alloy 6063 Sucharitpwatskul, S.
Mahayotsanun, N.
Bureerat, S.
2020 Coatings
4 (10), pp.
96. Multi-objective modified heat transfer search for truss optimization Pholdee, N.
Bureerat, S.
2020 Engineering with Computers
(), pp.
97. Optimum design of an air suspension seat using recent structural optimization techniques Bureerat, S. 2020 Materialpruefung/Materials Testing
3 (62), pp. 242-250
98. Self-adaptive many-objective meta-heuristic based on decomposition for many-objective conceptual design of a fixed wing unmanned aerial vehicle Panagant, N.
Pholdee, N.
Bureerat, S.
2020 Aerospace Science and Technology
(100), pp.
99. Surrogate-Assisted Reliability Optimisation of an Aircraft Wing with Static and Dynamic Aeroelastic Constraints Sleesongsom, S.
Panagant, N.
Pholdee, N.
Bureerat, S.
2020 International Journal of Aeronautical and Space Sciences
(), pp.
100. The Henry gas solubility optimization algorithm for optimum structural design of automobile brake components Pholdee, N.
Bureerat, S.
2020 Materialpruefung/Materials Testing
3 (62), pp. 261-264

Title Authors Year Journal title
1. Optimal Synthesis of Four-Bar Linkage Path Generation through Evolutionary Computation with a Novel Constraint Handling Technique. Sleesongsom, S
Bureerat, S
2018 Computational intelligence and neuroscience
(2018), pp. 5462563

Title Authors Year Journal title Cited count
< 2015 2016 2017 2018 2019 2020 Total
1. An artificial neural network for detection of simulated dental caries Suwadee Kositbowornchai
Sanphet Siriteptawee
Supattra Plermkamon
Sujin Bureerat
Danaipong Chetchotsak
2006 INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY
2.0 (1.0), pp. 91.0-96.0
9 0 0 0 0 0 9
2. Performance enhancement of evolutionary search for structural topology optimisation S Bureerat
J Limtragool
2006 FINITE ELEMENTS IN ANALYSIS AND DESIGN
6.0 (42.0), pp. 547.0-566.0
51 0 0 0 0 0 51
3. Topological design of structures using population-based optimization methods S. Bureerat
T. Kunakote
2006 INVERSE PROBLEMS IN SCIENCE AND ENGINEERING
6.0 (14.0), pp. 589.0-607.0
8 0 0 0 0 0 8
4. Geometrical design of plate-fin heat sinks using hybridization of MOEA and RSM Sungkom Srisompom
Sujin Bureerat
2008 IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
2.0 (31.0), pp. 351.0-360.0
43 0 0 0 0 0 43
5. Structural topology optimisation using simulated annealing with multiresolution design variables Sujin Bureerat
Jumlong Limtragool
2008 FINITE ELEMENTS IN ANALYSIS AND DESIGN
12-13 (44.0), pp. 738.0-747.0
34 0 0 0 0 0 34
6. Optimum plate-fin heat sinks by using a multi-objective evolutionary algorithm S. Bureerat
S. Srisomporn
2010 ENGINEERING OPTIMIZATION
4.0 (42.0), pp. 305.0-323.0
33 0 0 0 0 0 33
7. MULTIOBJECTIVE EVOLUTIONARY OPTIMIZATION OF SPLAYED PIN-FIN HEAT SINK Siwadol Kanyakam
Sujin Bureerat
2011 ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS
4.0 (5.0), pp. 553.0-565.0
11 0 0 0 0 0 11
8. Multi-objective topology optimization using evolutionary algorithms Tawatchai Kunakote
Sujin Bureerat
2011 ENGINEERING OPTIMIZATION
5.0 (43.0), pp. 541.0-557.0
49 0 0 0 0 0 49
9. Simultaneous topology, shape and sizing optimisation of a three-dimensional slender truss tower using multiobjective evolutionary algorithms Norapat Noilublao
Sujin Bureerat
2011 COMPUTERS & STRUCTURES
23-24 (89.0), pp. 2531.0-2538.0
35 0 0 0 0 0 35
10. Comparative Performance of Surrogate-Assisted MOEAs for Geometrical Design of Pin-Fin Heat Sinks Siwadol Kanyakam
Sujin Bureerat
2012 JOURNAL OF APPLIED MATHEMATICS
(), pp.
7 0 0 0 0 0 7
11. Multiobjective Optimization of a Pin-Fin Heat Sink Using Evolutionary Algorithms Siwadol Kanyakam
Sujin Bureerat
2012 JOURNAL OF ELECTRONIC PACKAGING
2.0 (134.0), pp.
2 0 0 0 0 0 2
12. Multi-stage design of an automotive component Adulyasak Boonpan
Sujin Bureerat
2012 INTERNATIONAL JOURNAL OF VEHICLE DESIGN
1-2 (60.0), pp. 84.0-99.0
2 0 0 0 0 0 2
13. Performance enhancement of multiobjective evolutionary optimisers for truss design using an approximate gradient Nantiwat Pholdee
Sujin Bureerat
2012 COMPUTERS & STRUCTURES
(106.0), pp. 115.0-124.0
24 0 0 0 0 0 24
14. Aircraft morphing wing design by using partial topology optimization S. Sleesongsom
S. Bureerat
K. Tai
2013 STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
6.0 (48.0), pp. 1109.0-1128.0
15 0 0 0 0 0 15
15. Antioptimisation of Trusses Using Two-Level Population-Based Incremental Learning Phinit Tontragunrat
Sujin Bureerat
2013 JOURNAL OF APPLIED MATHEMATICS
(), pp.
2 0 0 0 0 0 2
16. Hybridisation of real-code population-based incremental learning and differential evolution for multiobjective design of trusses Nantiwat Pholdee
Sujin Bureerat
2013 INFORMATION SCIENCES
(223.0), pp. 136.0-152.0
28 0 0 0 0 0 28
17. New conceptual design of aeroelastic wing structures by multi-objective optimization S. Sleesongsom
S. Bureerat
2013 ENGINEERING OPTIMIZATION
1.0 (45.0), pp. 107.0-122.0
11 0 0 0 0 0 11
18. Simultaneous topology and sizing optimization of a water distribution network using a hybrid multiobjective evolutionary algorithm Sujin Bureerat
Krit Sriworamas
2013 APPLIED SOFT COMPUTING
8.0 (13.0), pp. 3693.0-3702.0
11 0 0 0 0 0 11
19. Simultaneous Topology, Shape, and Sizing Optimisation of Plane Trusses with Adaptive Ground Finite Elements Using MOEAs Norapat Noilublao
Sujin Bureerat
2013 MATHEMATICAL PROBLEMS IN ENGINEERING
(), pp.
12 0 0 0 0 0 12
20. Surrogate-Assisted Multiobjective Evolutionary Algorithms for Structural Shape and Sizing Optimisation Tawatchai Kunakote
Sujin Bureerat
2013 MATHEMATICAL PROBLEMS IN ENGINEERING
(), pp.
5 0 0 0 0 0 5
21. Comparative performance of meta-heuristic algorithms for mass minimisation of trusses with dynamic constraints Nantiwat Pholdee
Sujin Bureerat
2014 ADVANCES IN ENGINEERING SOFTWARE
(75.0), pp. 1.0-13.0
65 0 0 0 0 0 65
22. Hybrid real-code population-based incremental learning and approximate gradients for multi-objective truss design Nantiwat Pholdee
Sujin Bureerat
2014 ENGINEERING OPTIMIZATION
8.0 (46.0), pp. 1032.0-1051.0
15 0 0 0 0 0 15
23. Solving Partial Differential Equations Using a New Differential Evolution Algorithm Natee Panagant
Sujin Bureerat
2014 MATHEMATICAL PROBLEMS IN ENGINEERING
(), pp.
2 0 0 0 0 0 2
24. An efficient optimum Latin hypercube sampling technique based on sequencing optimisation using simulated annealing Nantiwat Pholdee
Sujin Bureerat
2015 INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE
10.0 (46.0), pp. 1780.0-1789.0
29 0 0 0 0 0 29
25. Efficient hybrid evolutionary algorithm for optimization of a strip coiling process Nantiwat Pholdee
Won-Woong Park
Dong-Kyu Kim
Yong-Taek Im
Sujin Bureerat
Hyuck-Cheol Kwon
Myung-Sik Chun
2015 ENGINEERING OPTIMIZATION
4.0 (47.0), pp. 521.0-532.0
17 0 0 0 0 0 17
26. Flutter Analysis of Aircraft Wing Using an Alternative Reduced-order Modeling Method S. Sleesongsom
S. Winyangkul
S. Bureerat
2015 INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND ENERGY ENGINEERING (PEEE 2015)
(), pp. 98.0-101.0
0 0 0 0 0 0 0
27. Morphing Wing Structural Optimization Using Opposite-Based Population-Based Incremental Learning and Multigrid Ground Elements S. Sleesongsom
S. Bureerat
2015 MATHEMATICAL PROBLEMS IN ENGINEERING
(), pp.
5 0 0 0 0 0 5
28. Optimization of Flatness of Strip during Coiling Process based on Evolutionary Algorithms Nantiwat Pholdee
Sujin Bureerat
Won-Woong Park
Dong-Kyu Kim
Yong-Taek Im
Hyuck-Cheol Kwon
Myung-Sik Chun
2015 INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
7.0 (16.0), pp. 1493.0-1499.0
15 0 0 0 0 0 15
29. Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms Nantiwat Pholdee
Hyun Moo Baek
Sujin Bureerat
Yong-Taek Im
2015 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
8.0 (29.0), pp. 3427.0-3436.0
8 0 0 0 0 0 8
30. Surrogate Assisted Teaching Learning Based Optimisation for Process Design of a Non-circular Drawing Sequence N. Pholdee
S. Bureerat
H. M. Baek
Y. -T. Im
2015 PROCEEDINGS OF THE 5TH INTERNATIONAL SYMPOSIUM ON KNOWLEDGE ACQUISITION AND MODELING
(80.0), pp. 193.0-196.0
0 0 0 0 0 0 0
31. An Improved Teaching-Learning Based Optimization for Optimization of Flatness of a Strip During a Coiling Process Sujin Bureerat
Nantiwat Pholdee
Won-Woong Park
Dong-Kyu Kim
2016 MULTI-DISCIPLINARY TRENDS IN ARTIFICIAL INTELLIGENCE, (MIWAI 2016)
(10053.0), pp. 12.0-23.0
1 0 0 0 0 0 1
32. Examination of three meta-heuristic algorithms for optimal design of planar steel frames Ghanshyam G. Tejani
Vishwesh H. Bhensdadia
Sujin Bureerat
2016 ADVANCES IN COMPUTATIONAL DESIGN
1.0 (1.0), pp. 79.0-86.0
19 0 0 0 0 0 19
33. Hybrid real-code ant colony optimisation for constrained mechanical design Nantiwat Pholdee
Sujin Bureerat
2016 INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE
2.0 (47.0), pp. 474.0-491.0
16 0 0 0 0 0 16
34. Hybrid TLBO and BFGS for structural health monitoring optimisation problems Nantiwat Pholdee
Sujin Bureerat
2016 PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON MECHANICAL ENGINEERING AND MATERIAL SCIENCE
(93.0), pp. 199.0-204.0
0 0 0 0 0 0 0
35. Multiobjective optimization of a steering linkage S. Sleesongsom
S. Bureerat
2016 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
8.0 (30.0), pp. 3681.0-3691.0
12 0 0 0 0 0 12
36. Optimal Truss Sizing Using an Adaptive Differential Evolution Algorithm Sujin Bureerat
Nantiwat Pholdee
2016 JOURNAL OF COMPUTING IN CIVIL ENGINEERING
2.0 (30.0), pp.
25 0 0 0 0 0 25
37. Structural health monitoring through meta-heuristics - comparative performance study Nantiwat Pholdee
Sujin Bureerat
2016 ADVANCES IN COMPUTATIONAL DESIGN
4.0 (1.0), pp. 315.0-327.0
8 0 0 0 0 0 8
38. Adaptive Sine Cosine Algorithm Integrated with Differential Evolution for Structural Damage Detection Sujin Bureerat
Nantiwat Pholdee
2017 COMPUTATIONAL SCIENCE AND ITS APPLICATIONS - ICCSA 2017, PT I
(10404.0), pp. 71.0-86.0
10 0 0 0 0 0 10
39. Estimation of Distribution Algorithm Using Correlation between Binary Elements: A New Binary-Code Metaheuristic Nantiwat Pholdee
Sujin Bureerat
2017 MATHEMATICAL PROBLEMS IN ENGINEERING
(2017.0), pp.
0 0 0 0 0 0 0
40. Four-bar linkage path generation through self-adaptive population size teaching-learning based optimization S. Sleesongsom
S. Bureerat
2017 KNOWLEDGE-BASED SYSTEMS
(135.0), pp. 180.0-191.0
26 0 0 0 0 0 26
41. Hybrid real-code population-based incremental learning and differential evolution for many-objective optimisation of an automotive floor-frame Nantiwat Pholdee
Sujin Bureerat
Ali Riza Yildiz
2017 INTERNATIONAL JOURNAL OF VEHICLE DESIGN
1-3 (73.0), pp. 20.0-53.0
91 0 0 0 0 0 91
42. Many-Objective Optimisation of Trusses Through Meta-Heuristics Nantiwat Pholdee
Sujin Bureerat
Papot Jaroenapibal
Thana Radpukdee
2017 ADVANCES IN NEURAL NETWORKS, PT I
(10261.0), pp. 143.0-152.0
2 0 0 0 0 0 2
43. Optimal reactive power dispatch problem using a two-archive multi-objective grey wolf optimizer Kasem Nuaekaew
Pramin Artrit
Nantiwat Pholdee
Sujin Bureerat
2017 EXPERT SYSTEMS WITH APPLICATIONS
(87.0), pp. 79.0-89.0
30 0 0 0 0 0 30
44. Optimal U-shaped baffle square-duct heat exchanger through surrogate-assisted self-adaptive differential evolution with neighbourhood search and weighted exploitation-exploration Kittinan Wansaseub
Nantiwat Pholdee
Sujin Bureerat
2017 APPLIED THERMAL ENGINEERING
(118.0), pp. 455.0-463.0
10 0 0 0 0 0 10
45. Optimum design of a walking tractor handlebar through many-objective optimisation Apichit Mahachai
Sujin Bureerat
Nantiwat Pholdee
2017 ADVANCES IN COMPUTATIONAL DESIGN
4.0 (2.0), pp. 273.0-281.0
0 0 0 0 0 0 0
46. Topology, shape, and size optimization of truss structures using modified teaching-learning based optimization Ghanshyam G. Tejani
Vimal J. Saysani
Vivek K. Patel
Sujin Bureerat
2017 ADVANCES IN COMPUTATIONAL DESIGN
4.0 (2.0), pp. 313.0-331.0
4 0 0 0 0 0 4
47. Two-Stage Surrogate Assisted Differential Evolution for Optimization of a Non-Circular Drawing Sequence Nantiwat Pholdee
Sujin Bureerat
Hyun Moo Baek
Yong-Taek Im
2017 INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
4.0 (18.0), pp. 567.0-573.0
7 0 0 0 0 0 7
48. A Comparative Study of Eighteen Self-adaptive Metaheuristic Algorithms for Truss Sizing Optimisation Nantiwat Pholdee
Sujin Bureerat
2018 KSCE JOURNAL OF CIVIL ENGINEERING
8.0 (22.0), pp. 2982.0-2993.0
3 0 0 0 0 0 3
49. Alternative Constraint Handling Technique for Four-Bar Linkage Path Generation S. Sleesongsom
S. Bureerat
2018 2017 5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING
(324.0), pp.
2 0 0 0 0 0 2
50. Design and Development of a Threading Machine for Tobacco Leaves Ranaporn Senasutham
Sujin Bureerat
Juckamas Laohavanich
Cherdpong Chiawchanwattana
Suphan Yangyuen
2018 2018 THIRD INTERNATIONAL CONFERENCE ON ENGINEERING SCIENCE AND INNOVATIVE TECHNOLOGY (ESIT)
(), pp.
0 0 0 0 0 0 0
51. Inverse problem based differential evolution for efficient structural health monitoring of trusses Sujin Bureerat
Nantiwat Pholdee
2018 APPLIED SOFT COMPUTING
(66.0), pp. 462.0-472.0
17 0 0 0 0 0 17
52. Multiobjective adaptive symbiotic organisms search for truss optimization problems Ghanshyam G. Tejani
Nantiwat Pholdee
Sujin Bureerat
Doddy Prayogo
2018 KNOWLEDGE-BASED SYSTEMS
(161.0), pp. 398.0-414.0
15 0 0 0 0 0 15
53. Multiobjective Simultaneous Topology, Shape and Sizing Optimization of Trusses Using Evolutionary Optimizers Teerapol Techasen
Kittinan Wansasueb
Natee Panagant
Nantiwat Pholdee
Sujin Bureerat
2018 INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17)
(370.0), pp.
2 0 0 0 0 0 2
54. Multiobjective Trajectory Planning of a 6D Robot based on Multiobjective Meta Heuristic Search Nantiwat Pholdee
Sujin Bureerat
2018 PROCEEDINGS OF 2018 VII INTERNATIONAL CONFERENCE ON NETWORK, COMMUNICATION AND COMPUTING (ICNCC 2018)
(), pp. 352.0-356.0
0 0 0 0 0 0 0
55. Optimal Synthesis of Four-Bar Linkage Path Generation through Evolutionary Computation with a Novel Constraint Handling Technique Suwin Sleesongsom
Sujin Bureerat
2018 COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE
(), pp.
4 0 0 0 0 0 4
56. Optimisation of flight dynamic control based on many-objectives meta-heuristic: a comparative study Sujin Bureerat
Nantiwat Pholdee
Thana Radpukdee
2018 INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17)
(370.0), pp.
0 0 0 0 0 0 0
57. Optimum design of a hand-tractor handlebar through metaheuristic algorithms Apichit Mahachai
Sujin Bureerat
Nantiwat Pholdee
2018 INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17)
(370.0), pp.
0 0 0 0 0 0 0
58. Solving Inverse Kinematics of Robot Manipulators by Means of Meta-Heuristic Optimisation Kritsada Wichapong
Sujin Bureerat
Nantiwat Pholdee
2018 INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17)
(370.0), pp.
1 0 0 0 0 0 1
59. Synthesis of multiple cross-section pin fin heat sinks using multiobjective evolutionary algorithms Sanchai Ramphueiphad
Sujin Bureerat
2018 INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(118.0), pp. 462.0-470.0
7 0 0 0 0 0 7
60. Topology and Size Optimization of Trusses with Static and Dynamic Bounds by Modified Symbiotic Organisms Search Ghanshyam G. Tejani
Vimal J. Savsani
Sujin Bureerat
Vivek K. Patel
2018 JOURNAL OF COMPUTING IN CIVIL ENGINEERING
2.0 (32.0), pp.
17 0 0 0 0 0 17
61. Topology Optimisation Using MPBILs and Multi-Grid Ground Element Suwin Sleesongsom
Sujin Bureerat
2018 APPLIED SCIENCES-BASEL
2.0 (8.0), pp.
7 0 0 0 0 0 7
62. Truss topology, shape and sizing optimization by fully stressed design based on hybrid grey wolf optimization and adaptive differential evolution Natee Panagant
Sujin Bureerat
2018 ENGINEERING OPTIMIZATION
10.0 (50.0), pp. 1645.0-1661.0
12 0 0 0 0 0 12
63. Vibration Suppression of a Single-Cylinder Engine by Means of Multi-objective Evolutionary Optimisation Suwin Sleesongsom
Sujin Bureerat
2018 SUSTAINABILITY
6.0 (10.0), pp.
4 0 0 0 0 0 4
64. Alternative Constraint Handling Technique for Four-Bar Linkage Motion Generation S. Sleesongsom
S. Bureerat
2019 9TH THAI SOCIETY OF MECHANICAL ENGINEERS, INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (TSME-ICOME 2018)
(501.0), pp.
0 0 0 0 0 0 0
65. A new hybrid Harris hawks-Nelder-Mead optimization algorithm for solving design and manufacturing problems Ali Riza Yildrz
Betul Sultan Yildiz
Sadiq M. Sait
Sujin Bureerat
Nantiwai Pholdee
2019 MATERIALS TESTING
8.0 (61.0), pp. 735.0-743.0
11 0 0 0 0 0 11
66. A novel self-adaptive hybrid multi-objective meta-heuristic for reliability design of trusses with simultaneous topology, shape and sizing optimisation design variables Natee Panagant
Sujin Bureerat
Kang Tai
2019 STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
5.0 (60.0), pp. 1937.0-1955.0
1 0 0 0 0 0 1
67. Self-adaptive MRPBIL-DE for 6D robot multiobjective trajectory planning Sujin Bureerat
Nantiwat Pholdee
Thana Radpukdee
Papot Jaroenapibal
2019 EXPERT SYSTEMS WITH APPLICATIONS
(136.0), pp. 133.0-144.0
0 0 0 0 0 0 0
68. Simultaneous topology, shape, and size optimization of trusses, taking account of uncertainties using multi-objective evolutionary algorithms Teerapol Techasen
Kittinan Wansasueb
Natee Panagant
Nantiwat Pholdee
Sujin Bureerat
2019 ENGINEERING WITH COMPUTERS
2.0 (35.0), pp. 721.0-740.0
5 0 0 0 0 0 5
69. Structural optimization using multi-objective modified adaptive symbiotic organisms search Ghanshyam G. Tejani
Nantiwat Pholdee
Sujin Bureerat
Doddy Prayogo
Amir H. Gandomi
2019 EXPERT SYSTEMS WITH APPLICATIONS
(125.0), pp. 425.0-441.0
14 0 0 0 0 0 14
70. Synthesis of four-bar linkage motion generation using optimization algorithms VVisanu Phukaokaew
Suwin Sleesongsom
Natee Panagant
Sujin Bureerat
2019 ADVANCES IN COMPUTATIONAL DESIGN
3.0 (4.0), pp. 197.0-210.0
0 0 0 0 0 0 0
71. Topology optimization of truss subjected to static and dynamic constraints by integrating simulated annealing into passing vehicle search algorithms Ghanshyam G. Tejani
Vimal J. Savsani
Sujin Bureerat
Vivek K. Patel
Poonam Savsani
2019 ENGINEERING WITH COMPUTERS
2.0 (35.0), pp. 499.0-517.0
6 0 0 0 0 0 6
72. An Approach Combining an Efficient and Global Evolutionary Algorithm with a Gradient-Based Method for Airfoil Design Problems Atthaphon Ariyarit
Masahiro Kanazaki
Sujin Bureerat
2020 SMART SCIENCE
(), pp.
0 0 0 0 0 0 0
73. A novel hybrid Harris hawks-simulated annealing algorithm and RBF-based metamodel for design optimization of highway guardrails Dies Kurtulus
Ali Riza Yildiz
Sadiq M. Sait
Sujin Bureerat
Khon Kaen
2020 MATERIALS TESTING
3.0 (62.0), pp. 251.0-260.0
3 0 0 0 0 0 3
74. A novel hybridized metaheuristic technique in enhancing the diagnosis of cross-sectional dent damaged offshore platform members Wonsiri Punurai
Md Samdani Azad
Nantiwat Pholdee
Sujin Bureerat
Chana Sinsabvarodom
2020 COMPUTATIONAL INTELLIGENCE
1.0 (36.0), pp. 132.0-150.0
0 0 0 0 0 0 0
75. Butterfly optimization algorithm for optimum shape design of automobile suspension components Betul Sultan Yildiz
Ali Riza Yildiz
Emre Isa Albak
Hammoudi Abderazek
Sadiq M. Sait
Sujin Bureerat
2020 MATERIALS TESTING
4.0 (62.0), pp. 365.0-370.0
1 0 0 0 0 0 1
76. Constraint handling technique for four-bar linkage path generation using self-adaptive teaching-learning-based optimization with a diversity archive Sujin Bureerat
Suwin Sleesongsom
2020 ENGINEERING OPTIMIZATION
(), pp.
0 0 0 0 0 0 0
77. Multi-objective modified heat transfer search for truss optimization Sumit Kumar
Ghanshyam G. Tejani
Nantiwat Pholdee
Sujin Bureerat
2020 ENGINEERING WITH COMPUTERS
(), pp.
0 0 0 0 0 0 0
78. Optimum design of an air suspension seat using recent structural optimization techniques Ayhan Balkan
Ali Riza Yildiz
Sadiq M. Sait
Sujin Bureerat
2020 MATERIALS TESTING
3.0 (62.0), pp. 242.0-250.0
0 0 0 0 0 0 0
79. Self-adaptive many-objective meta-heuristic based on decomposition for many-objective conceptual design of a fixed wing unmanned aerial vehicle Pakin Champasak
Natee Panagant
Nantiwat Pholdee
Sujin Bureerat
Ali Riza Yildiz
2020 AEROSPACE SCIENCE AND TECHNOLOGY
(100.0), pp.
0 0 0 0 0 0 0
80. The Henry gas solubility optimization algorithm for optimum structural design of automobile brake components Betul Sultan Yildiz
Ali Riza Yildiz
Nantiwat Pholdee
Sujin Bureerat
Sadiq M. Sait
Vivek Patel
2020 MATERIALS TESTING
3.0 (62.0), pp. 261.0-264.0
3 0 0 0 0 0 3

Title Authors Year Journal title
1. Comparison of Signal Processing Techniques for Fault Detection in Helical Spur Gears Setthapong Hamcumpai
Khon Kaen Ubonratana DAM
Sujin Bureerat
Nawapak Eua-Anant
Thailand 40002
2007 KKU ENGINEERING JOURNAL
1 (34), pp. 59-72
2. Effect of bearing sleeve lead-in chamfer, and parallelism on tolerance ring installation Piriyakorn Jirawattanakasem
Sujin Bureerat
2010 KKU ENGINEERING JOURNAL
1 (37), pp. 65-70
3. Prediction of Head Stack Assembly Gram Load Using Finite Element Analysis Khemakorn Chaloemsri
Sujin Bureerat
Thailand Khon Kaen University
2010 KKU ENGINEERING JOURNAL
1 (37), pp. 55-63
4. Material Identification of a Bridge Carrier Using Finite Element Analysis Nantiwat Pholdee
Sujin Bureerat
2010 KKU ENGINEERING JOURNAL
2 (37), pp. 93-99
5. Evaluation of Head Stack Assembly Pitch Static Attitude by Means of Finite Element Analysis: A Case Study of 2.5-in Hard Disk Drives Rattaphom Khlaiaksorn
Sujin Bureerat
Thailand Khon Kaen University
2010 KKU ENGINEERING JOURNAL
1 (37), pp. 47-53

Title Authors NRIIS type Year NRIIS Scholarship

0.07005667686462402