Title | Author | Year | SCOPUS | PUBMED | ISI | TCI | |
---|---|---|---|---|---|---|---|
1. | Evolutionary methods for the optimisation of engineering systems | Bureerat, S. | 1998 | ||||
2. | An artificial neural network for detection of simulated dental caries | Suwadee Kositbowornchai Sanphet Siriteptawee Supattra Plermkamon Sujin Bureerat Danaipong Chetchotsak |
2006 | ||||
3. | Performance enhancement of evolutionary search for structural topology optimisation | S Bureerat J Limtragool |
2006 | ||||
4. | Topological design of structures using population-based optimization methods | S. Bureerat T. Kunakote |
2006 | ||||
5. | Comparison of Signal Processing Techniques for Fault Detection in Helical Spur Gears | Setthapong Hamcumpai Khon Kaen Ubonratana DAM Sujin Bureerat Nawapak Eua-Anant Thailand 40002 |
2007 | ||||
6. | Passive vibration suppression of a walking tractor handlebar structure using multiobjective PBIL | Kanyakam, S. Bureerat, S. |
2007 | ||||
7. | Population-based incremental learning for multiobjective optimisation | Bureerat, S. Sriworamas, K. |
2007 | ||||
8. | Geometrical design of plate-fin heat sinks using hybridization of MOEA and RSM | Sungkom Srisompom Sujin Bureerat |
2008 | ||||
9. | Structural topology optimisation using simulated annealing with multiresolution design variables | Sujin Bureerat Jumlong Limtragool |
2008 | ||||
10. | Effect of bearing sleeve lead-in chamfer, and parallelism on tolerance ring installation | Piriyakorn Jirawattanakasem Sujin Bureerat |
2010 | ||||
11. | Evaluation of Head Stack Assembly Pitch Static Attitude by Means of Finite Element Analysis: A Case Study of 2.5-in Hard Disk Drives | Rattaphom Khlaiaksorn Sujin Bureerat Thailand Khon Kaen University |
2010 | ||||
12. | Material Identification of a Bridge Carrier Using Finite Element Analysis | Nantiwat Pholdee Sujin Bureerat |
2010 | ||||
13. | Optimum plate-fin heat sinks by using a multi-objective evolutionary algorithm | Bureerat, S. Srisomporn, S. |
2010 | ||||
14. | Prediction of Head Stack Assembly Gram Load Using Finite Element Analysis | Khemakorn Chaloemsri Sujin Bureerat Thailand Khon Kaen University |
2010 | ||||
15. | Effect of actuating forces on aeroelastic characteristics of a morphing aircraft wing | Sleesongsom, S. Bureerat, S. |
2011 | ||||
16. | Hybrid population-based incremental learning using real codes | Bureerat, S. | 2011 | ||||
17. | Improved population-based incremental learning in continuous spaces | Bureerat, S. | 2011 | ||||
18. | MULTIOBJECTIVE EVOLUTIONARY OPTIMIZATION OF SPLAYED PIN-FIN HEAT SINK | Kanyakam, S. Bureerat, S. |
2011 | ||||
19. | Multi-objective topology optimization using evolutionary algorithms | Kunakote, T. Bureerat, S. |
2011 | ||||
20. | Optimal design of a pin-fin heat sink using a surrogate-assisted multiobjective evolutionary algorithm | Kanyakam, S. Bureerat, S. |
2011 | ||||
21. | Simultaneous topology, shape and sizing optimisation of a three-dimensional slender truss tower using multiobjective evolutionary algorithms | Norapat Noilublao Sujin Bureerat |
2011 | ||||
22. | Topology and sizing optimization of trusses with adaptive ground finite elements using multiobjective PBIL | Noilublao, C. Bureerat, S. |
2011 | ||||
23. | Comparative performance of surrogate-assisted MOEAs for geometrical design of pin-fin heat sinks | Siwadol Kanyakam Sujin Bureerat |
2012 | ||||
24. | Maximizing volumetric efficiency of a diesel engine using an air pump to compress air-biogas mixture into the engine via venturi | Bureerat, S. | 2012 | ||||
25. | Multiobjective optimization of a pin-fin heat sink using evolutionary algorithms | Siwadol Kanyakam Sujin Bureerat |
2012 | ||||
26. | Multi-stage design of an automotive component | Adulyasak Boonpan Sujin Bureerat |
2012 | ||||
27. | Optimization of a triangular slot shape in a tire tread block by using the finite element analysis and MPSO | Dolwichai, T. Limtragool, J. Bureerat, S. |
2012 | ||||
28. | Performance enhancement of multiobjective evolutionary optimisers for truss design using an approximate gradient | Nantiwat Pholdee Sujin Bureerat |
2012 | ||||
29. | Surrogate-assisted evolutionary optimizers for multiobjective design of a torque arm structure | Pholdee, N. Bureerat, S. |
2012 | ||||
30. | Aircraft morphing wing design by using partial topology optimization | Sleesongsom, S. Bureerat, S. |
2013 | ||||
31. | Antioptimisation of trusses using two-level population-based incremental learning | Phinit Tontragunrat Sujin Bureerat |
2013 | ||||
32. | Energy saving for an evaporative air-conditioning system in a poultry house by a season mode controller | Senawong, K. Bureerat, S. Radpukdee, T. |
2013 | ||||
33. | Enhanced efficiency of a diesel engine for biogas by using a two-plain venturi | Wichettapong, K. Bureerat, S. |
2013 | ||||
34. | Hybridisation of real-code population-based incremental learning and differential evolution for multiobjective design of trusses | Nantiwat Pholdee Sujin Bureerat |
2013 | ||||
35. | New conceptual design of aeroelastic wing structures by multi-objective optimization | S. Sleesongsom S. Bureerat |
2013 | ||||
36. | Simultaneous topology and sizing optimization of a water distribution network using a hybrid multiobjective evolutionary algorithm | Bureerat, S. Sriworamas, K. |
2013 | ||||
37. | Simultaneous topology, shape, and sizing optimisation of plane trusses with adaptive ground finite elements using MOEAs | Norapat Noilublao Sujin Bureerat |
2013 | ||||
38. | Sugarcane harvest scheduling for maximizing total sugar yield | Sethanan, K. Theerakulpisut, S. Taechasook, P. Neungmatcha, W. Bureerat, S. |
2013 | ||||
39. | Surrogate-assisted multiobjective evolutionary algorithms for structural shape and sizing optimisation | Tawatchai Kunakote Sujin Bureerat |
2013 | ||||
40. | Comparative performance of meta-heuristic algorithms for mass minimisation of trusses with dynamic constraints | Nantiwat Pholdee Sujin Bureerat |
2014 | ||||
41. | Differential evolution algorithm for solving a nonlinear single pendulum problem | Panagant, N. Bureerat, S. |
2014 | ||||
42. | Effects of an injection angle of water pipes in an ultrasonic cleaning tank on particle disposal capability | Wongmanee, K. Bureerat, S. |
2014 | ||||
43. | Hybrid real-code ant colony optimisation for constrained mechanical design | Pholdee, N. Bureerat, S. |
2014 | ||||
44. | Hybrid real-code population-based incremental learning and approximate gradients for multi-objective truss design | Pholdee, N. Bureerat, S. |
2014 | ||||
45. | Preface | Bureerat, S. | 2014 | ||||
46. | Solving Partial Differential Equations Using a New Differential Evolution Algorithm | Panagant, N. Bureerat, S. |
2014 | ||||
47. | An efficient optimum Latin hypercube sampling technique based on sequencing optimisation using simulated annealing | Pholdee, N. Bureerat, S. |
2015 | ||||
48. | Efficient hybrid evolutionary algorithm for optimization of a strip coiling process | Nantiwat Pholdee Won-Woong Park Dong-Kyu Kim Yong-Taek Im Sujin Bureerat Hyuck-Cheol Kwon Myung-Sik Chun |
2015 | ||||
49. | Flutter Analysis of Aircraft Wing Using an Alternative Reduced-order Modeling Method | S. Sleesongsom S. Winyangkul S. Bureerat |
2015 | ||||
50. | Morphing wing structural optimization using opposite-based population-based incremental learning and multigrid ground elements | S. Sleesongsom S. Bureerat |
2015 | ||||
51. | Optimization of Flatness of Strip during Coiling Process based on Evolutionary Algorithms | Pholdee, N. Bureerat, S. Kwon, H. Chun, M. |
2015 | ||||
52. | Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms | Nantiwat Pholdee Hyun Moo Baek Sujin Bureerat Yong-Taek Im |
2015 | ||||
53. | Surrogate Assisted Teaching Learning Based Optimisation for Process Design of a Non-circular Drawing Sequence | N. Pholdee S. Bureerat H. M. Baek Y. -T. Im |
2015 | ||||
54. | An Improved Teaching-Learning Based Optimization for Optimization of Flatness of a Strip During a Coiling Process | Sujin Bureerat Nantiwat Pholdee Won-Woong Park Dong-Kyu Kim |
2016 | ||||
55. | Examination of three meta-heuristic algorithms for optimal design of planar steel frames | Ghanshyam G. Tejani Vishwesh H. Bhensdadia Sujin Bureerat |
2016 | ||||
56. | Hybrid real-code ant colony optimisation for constrained mechanical design | Pholdee, N. Bureerat, S. |
2016 | ||||
57. | Hybrid TLBO and BFGS for structural health monitoring optimisation problems | Nantiwat Pholdee Sujin Bureerat |
2016 | ||||
58. | Multiobjective optimization of a steering linkage | S. Sleesongsom S. Bureerat |
2016 | ||||
59. | Optimal Truss Sizing Using an Adaptive Differential Evolution Algorithm | Bureerat, S. Pholdee, N. |
2016 | ||||
60. | Structural health monitoring through meta-heuristics - comparative performance study | Nantiwat Pholdee Sujin Bureerat |
2016 | ||||
61. | Adaptive sine cosine algorithm integrated with differential evolution for structural damage detection | Sujin Bureerat Nantiwat Pholdee |
2017 | ||||
62. | Estimation of Distribution Algorithm Using Correlation between Binary Elements: A New Binary-Code Metaheuristic | Pholdee, N. Bureerat, S. |
2017 | ||||
63. | Four-bar linkage path generation through self-adaptive population size teaching-learning based optimization | Sleesongsom, S. Bureerat, S. |
2017 | ||||
64. | Hybrid real-code population-based incremental learning and differential evolution for many-objective optimisation of an automotive floor-frame | Nantiwat Pholdee Sujin Bureerat Ali Riza Yildiz |
2017 | ||||
65. | Many-objective optimisation of trusses through meta-heuristics | Nantiwat Pholdee Sujin Bureerat Papot Jaroenapibal Thana Radpukdee |
2017 | ||||
66. | Meta-heuristics for engineering optimisation - Applications to metal forming processes | Pholdee, N. Bureerat, S. |
2017 | ||||
67. | Optimal reactive power dispatch problem using a two-archive multi-objective grey wolf optimizer | Kasem Nuaekaew Pramin Artrit Nantiwat Pholdee Sujin Bureerat |
2017 | ||||
68. | Optimal U-shaped baffle square-duct heat exchanger through surrogate-assisted self-adaptive differential evolution with neighbourhood search and weighted exploitation-exploration | Kittinan Wansaseub Nantiwat Pholdee Sujin Bureerat |
2017 | ||||
69. | Optimum design of a walking tractor handlebar through many-objective optimisation | Bureerat, S. Pholdee, N. |
2017 | ||||
70. | Optimum radii and heights of U-shaped baffles in a square duct heat exchanger using surrogate-assisted optimization | Pholdee, N. Bureerat, S. |
2017 | ||||
71. | Topology, shape, and size optimization of truss structures using modified teaching-learning based optimization | Bureerat, S. | 2017 | ||||
72. | Two-stage surrogate assisted differential evolution for optimization of a non-circular drawing sequence | Nantiwat Pholdee Sujin Bureerat Hyun Moo Baek Yong-Taek Im |
2017 | ||||
73. | A Comparative Study of Eighteen Self-adaptive Metaheuristic Algorithms for Truss Sizing Optimisation | Nantiwat Pholdee Sujin Bureerat |
2018 | ||||
74. | ADOSH: software with graphic user interface for analysis and design of truss structures | Panagant, N. Bureerat, S. |
2018 | ||||
75. | Alternative Constraint Handling Technique for Four-Bar Linkage Path Generation | Sleesongsom, S. Bureerat, S. |
2018 | ||||
76. | Design and Development of a Threading Machine for Tobacco Leaves | Ranaporn Senasutham Sujin Bureerat Juckamas Laohavanich Cherdpong Chiawchanwattana Suphan Yangyuen |
2018 | ||||
77. | Development of frame finite element model for truss structures with semi-rigid connections | Panagant, N. Bureerat, S. |
2018 | ||||
78. | Inverse problem based differential evolution for efficient structural health monitoring of trusses | Bureerat, S. Pholdee, N. |
2018 | ||||
79. | Multi-mutation scheme adaptive differential evolution for solving truss sizing optimization | Panagant, N. Bureerat, S. |
2018 | ||||
80. | Multiobjective adaptive symbiotic organisms search for truss optimization problems | Pholdee, N. Bureerat, S. |
2018 | ||||
81. | Multiobjective Simultaneous Topology, Shape and Sizing Optimization of Trusses Using Evolutionary Optimizers | Panagant, N. Pholdee, N. Bureerat, S. |
2018 | ||||
82. | Multiobjective trajectory planning of a 6D robot based on multiobjective meta heuristic search | Nantiwat Pholdee Sujin Bureerat |
2018 | ||||
83. | Optimal Synthesis of Four-Bar Linkage Path Generation through Evolutionary Computation with a Novel Constraint Handling Technique | Sleesongsom, S. Bureerat, S. |
2018 | ||||
84. | Optimisation of flight dynamic control based on many-objectives meta-heuristic: A comparative study | Sujin Bureerat Nantiwat Pholdee Thana Radpukdee |
2018 | ||||
85. | Optimization of steering linkage including the effect of McPherson strut front suspension | Sleesongsom, S. Bureerat, S. |
2018 | ||||
86. | Optimum design of a hand-tractor handlebar through metaheuristic algorithms | Apichit Mahachai Sujin Bureerat Nantiwat Pholdee |
2018 | ||||
87. | Solving Inverse Kinematics of Robot Manipulators by Means of Meta-Heuristic Optimisation | Kritsada Wichapong Sujin Bureerat Nantiwat Pholdee |
2018 | ||||
88. | Synthesis of multiple cross-section pin fin heat sinks using multiobjective evolutionary algorithms | Bureerat, S. | 2018 | ||||
89. | Topology and Size Optimization of Trusses with Static and Dynamic Bounds by Modified Symbiotic Organisms Search | Ghanshyam G. Tejani Vimal J. Savsani Sujin Bureerat Vivek K. Patel |
2018 | ||||
90. | Topology Optimisation Using MPBILs and Multi-Grid Ground Element | Sleesongsom, S. Bureerat, S. |
2018 | ||||
91. | Trajectory Planning of a 6D Robot based on Meta Heuristic Algorithms | Pholdee, N. Bureerat, S. Radpukdee, T. |
2018 | ||||
92. | Truss topology, shape and sizing optimization by fully stressed design based on hybrid grey wolf optimization and adaptive differential evolution | Natee Panagant Sujin Bureerat |
2018 | ||||
93. | Vibration suppression of a single-cylinder engine by means of multi-objective evolutionary optimisation | Suwin Sleesongsom Sujin Bureerat |
2018 | ||||
94. | Alternative Constraint Handling Technique for Four-Bar Linkage Motion Generation | Sleesongsom, S. Bureerat, S. |
2019 | ||||
95. | A new hybrid Harris hawks-Nelder-Mead optimization algorithm for solving design and manufacturing problems | Bureerat, S. Pholdee, N. |
2019 | ||||
96. | A novel self-adaptive hybrid multi-objective meta-heuristic for reliability design of trusses with simultaneous topology, shape and sizing optimisation design variables | Panagant, N. Bureerat, S. |
2019 | ||||
97. | Design and Development of a Threading Machine for Tobacco Leaves | Bureerat, S. Laohavanich, J. Chiawchanwattana, C. Yangyuen, S. |
2019 | ||||
98. | Multi-objective optimization of a steering linkage using alternative objective functions | Sleesongsom, S. Bureerat, S. |
2019 | ||||
99. | Self-adaptive MRPBIL-DE for 6D robot multiobjective trajectory planning | Sujin Bureerat Nantiwat Pholdee Thana Radpukdee Papot Jaroenapibal |
2019 | ||||
100. | Simultaneous topology, shape, and size optimization of trusses, taking account of uncertainties using multi-objective evolutionary algorithms | Teerapol Techasen Kittinan Wansasueb Natee Panagant Nantiwat Pholdee Sujin Bureerat |
2019 | ||||
101. | Structural optimization using multi-objective modified adaptive symbiotic organisms search | Ghanshyam G. Tejani Nantiwat Pholdee Sujin Bureerat Doddy Prayogo Amir H. Gandomi |
2019 | ||||
102. | Synthesis of four-bar linkage motion generation using optimization algorithms | Sleesongsom, S. Panagant, N. Bureerat, S. |
2019 | ||||
103. | Topology optimization of truss subjected to static and dynamic constraints by integrating simulated annealing into passing vehicle search algorithms | Ghanshyam G. Tejani Vimal J. Savsani Sujin Bureerat Vivek K. Patel Poonam Savsani |
2019 | ||||
104. | An Approach Combining an Efficient and Global Evolutionary Algorithm with a Gradient-Based Method for Airfoil Design Problems | Bureerat, S. | 2020 | ||||
105. | A novel hybrid Harris hawks-simulated annealing algorithm and RBF-based metamodel for design optimization of highway guardrails | Dies Kurtulus Ali Riza Yildiz Sadiq M. Sait Sujin Bureerat Khon Kaen |
2020 | ||||
106. | A novel hybridized metaheuristic technique in enhancing the diagnosis of cross-sectional dent damaged offshore platform members | Pholdee, N. Bureerat, S. |
2020 | ||||
107. | Butterfly optimization algorithm for optimum shape design of automobile suspension components | Betul Sultan Yildiz Ali Riza Yildiz Emre Isa Albak Hammoudi Abderazek Sadiq M. Sait Sujin Bureerat |
2020 | ||||
108. | Constraint handling technique for four-bar linkage path generation using self-adaptive teaching-learning-based optimization with a diversity archive | Sujin Bureerat Suwin Sleesongsom |
2020 | ||||
109. | Constraint handling technique for four-bar linkage path generation using self-adaptive teaching–learning-based optimization with a diversity archive | Bureerat, S. Sleesongsom, S. |
2020 | ||||
110. | Effects of tool coatings on energy consumption in micro-extrusion of aluminum alloy 6063 | Sucharitpwatskul, S. Mahayotsanun, N. Bureerat, S. |
2020 | ||||
111. | Multi-objective modified heat transfer search for truss optimization | Sumit Kumar Ghanshyam G. Tejani Nantiwat Pholdee Sujin Bureerat |
2020 | ||||
112. | Optimum design of an air suspension seat using recent structural optimization techniques | Bureerat, S. | 2020 | ||||
113. | Self-adaptive many-objective meta-heuristic based on decomposition for many-objective conceptual design of a fixed wing unmanned aerial vehicle | Pakin Champasak Natee Panagant Nantiwat Pholdee Sujin Bureerat Ali Riza Yildiz |
2020 | ||||
114. | Surrogate-Assisted Reliability Optimisation of an Aircraft Wing with Static and Dynamic Aeroelastic Constraints | Sleesongsom, S. Panagant, N. Pholdee, N. Bureerat, S. |
2020 | ||||
115. | The Henry gas solubility optimization algorithm for optimum structural design of automobile brake components | Pholdee, N. Bureerat, S. |
2020 | Count | 100 | 1 | 80 | 5 |
Title | Authors | Year | Publication name | Cited count | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
< 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | รวม | ||||||
1. | Evolutionary methods for the optimisation of engineering systems | Bureerat, S. | 1998 |
IEE Colloquium (Digest) 521 (), pp. 1/1-1/6 |
||||||||
2. | An artificial neural network for detection of simulated dental caries | Kositbowornchai, S. Siriteptawee, S. Plermkamon, S. Bureerat, S. Chetchotsak, D. |
2006 |
International Journal of Computer Assisted Radiology and Surgery 2 (1), pp. 91-96 |
||||||||
3. | Performance enhancement of evolutionary search for structural topology optimisation | Bureerat, S. Limtragool, J. |
2006 |
Finite Elements in Analysis and Design 6 (42), pp. 547-566 |
||||||||
4. | Topological design of structures using population-based optimization methods | Bureerat, S. Kunakote, T. |
2006 |
Inverse Problems in Science and Engineering 6 (14), pp. 589-607 |
||||||||
5. | Passive vibration suppression of a walking tractor handlebar structure using multiobjective PBIL | Kanyakam, S. Bureerat, S. |
2007 |
2007 IEEE Congress on Evolutionary Computation, CEC 2007 (), pp. 4162-4169 |
||||||||
6. | Population-based incremental learning for multiobjective optimisation | Bureerat, S. Sriworamas, K. |
2007 |
Advances in Soft Computing (39), pp. 223-232 |
||||||||
7. | Geometrical design of plate-fin heat sinks using hybridization of MOEA and RSM | Srisomporn, S. Bureerat, S. |
2008 |
IEEE Transactions on Components and Packaging Technologies 2 SPEC. ISS. (31), pp. 351-360 |
||||||||
8. | Structural topology optimisation using simulated annealing with multiresolution design variables | Bureerat, S. Limtragool, J. |
2008 |
Finite Elements in Analysis and Design 12-13 (44), pp. 738-747 |
||||||||
9. | Optimum plate-fin heat sinks by using a multi-objective evolutionary algorithm | Bureerat, S. Srisomporn, S. |
2010 |
Engineering Optimization 4 (42), pp. 305-323 |
||||||||
10. | Effect of actuating forces on aeroelastic characteristics of a morphing aircraft wing | Sleesongsom, S. Bureerat, S. |
2011 |
Applied Mechanics and Materials (52-54), pp. 308-317 |
||||||||
11. | Hybrid population-based incremental learning using real codes | Bureerat, S. | 2011 |
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (6683 LNCS), pp. 379-391 |
||||||||
12. | Improved population-based incremental learning in continuous spaces | Bureerat, S. | 2011 |
Advances in Intelligent and Soft Computing (96 AISC), pp. 77-86 |
||||||||
13. | Multiobjective evolutionary optimization of splayed pin-fin heat sink | Kanyakam, S. Bureerat, S. |
2011 |
Engineering Applications of Computational Fluid Mechanics 4 (5), pp. 553-565 |
||||||||
14. | Multi-objective topology optimization using evolutionary algorithms | Kunakote, T. Bureerat, S. |
2011 |
Engineering Optimization 5 (43), pp. 541-557 |
||||||||
15. | Optimal design of a pin-fin heat sink using a surrogate-assisted multiobjective evolutionary algorithm | Kanyakam, S. Bureerat, S. |
2011 |
Advanced Materials Research (308-310), pp. 1122-1128 |
||||||||
16. | Simultaneous topology, shape and sizing optimisation of a three-dimensional slender truss tower using multiobjective evolutionary algorithms | Noilublao, N. Bureerat, S. |
2011 |
Computers and Structures 23-24 (89), pp. 2531-2538 |
||||||||
17. | Topology and sizing optimization of trusses with adaptive ground finite elements using multiobjective PBIL | Noilublao, C. Bureerat, S. |
2011 |
Advanced Materials Research (308-310), pp. 1116-1121 |
||||||||
18. | Comparative performance of surrogate-assisted MOEAs for geometrical design of pin-fin heat sinks | Kanyakam, S. Bureerat, S. |
2012 |
Journal of Applied Mathematics (2012), pp. |
||||||||
19. | Maximizing volumetric efficiency of a diesel engine using an air pump to compress air-biogas mixture into the engine via venturi | Bureerat, S. | 2012 |
Applied Mechanics and Materials (148-149), pp. 1051-1057 |
||||||||
20. | Multiobjective optimization of a pin-fin heat sink using evolutionary algorithms | Kanyakam, S. Bureerat, S. |
2012 |
Journal of Electronic Packaging, Transactions of the ASME 2 (134), pp. |
||||||||
21. | Multi-stage design of an automotive component | Boonpan, A. Bureerat, S. |
2012 |
International Journal of Vehicle Design 1-2 (60), pp. 84-99 |
||||||||
22. | Optimization of a triangular slot shape in a tire tread block by using the finite element analysis and MPSO | Dolwichai, T. Limtragool, J. Bureerat, S. |
2012 |
Advanced Materials Research (505), pp. 424-428 |
||||||||
23. | Performance enhancement of multiobjective evolutionary optimisers for truss design using an approximate gradient | Pholdee, N. Bureerat, S. |
2012 |
Computers and Structures (106-107), pp. 115-124 |
||||||||
24. | Surrogate-assisted evolutionary optimizers for multiobjective design of a torque arm structure | Pholdee, N. Bureerat, S. |
2012 |
Applied Mechanics and Materials (101-102), pp. 324-328 |
||||||||
25. | Aircraft morphing wing design by using partial topology optimization | Sleesongsom, S. Bureerat, S. |
2013 |
Structural and Multidisciplinary Optimization 6 (48), pp. 1109-1128 |
||||||||
26. | Antioptimisation of trusses using two-level population-based incremental learning | Tontragunrat, P. Bureerat, S. |
2013 |
Journal of Applied Mathematics (2013), pp. |
||||||||
27. | Energy saving for an evaporative air-conditioning system in a poultry house by a season mode controller | Senawong, K. Bureerat, S. Radpukdee, T. |
2013 |
Advanced Science Letters 11 (19), pp. 3280-3284 |
||||||||
28. | Enhanced efficiency of a diesel engine for biogas by using a two-plain venturi | Wichettapong, K. Bureerat, S. |
2013 |
Advanced Science Letters 11 (19), pp. 3257-3259 |
||||||||
29. | Hybridisation of real-code population-based incremental learning and differential evolution for multiobjective design of trusses | Pholdee, N. Bureerat, S. |
2013 |
Information Sciences (223), pp. 136-152 |
||||||||
30. | New conceptual design of aeroelastic wing structures by multi-objective optimization | Sleesongsom, S. Bureerat, S. |
2013 |
Engineering Optimization 1 (45), pp. 107-122 |
||||||||
31. | Simultaneous topology and sizing optimization of a water distribution network using a hybrid multiobjective evolutionary algorithm | Bureerat, S. Sriworamas, K. |
2013 |
Applied Soft Computing Journal 8 (13), pp. 3693-3702 |
||||||||
32. | Simultaneous topology, shape, and sizing optimisation of plane trusses with adaptive ground finite elements using MOEAs | Noilublao, N. Bureerat, S. |
2013 |
Mathematical Problems in Engineering (2013), pp. |
||||||||
33. | Sugarcane harvest scheduling for maximizing total sugar yield | Sethanan, K. Theerakulpisut, S. Taechasook, P. Neungmatcha, W. Bureerat, S. |
2013 |
Advanced Science Letters 10 (19), pp. 3122-3125 |
||||||||
34. | Surrogate-assisted multiobjective evolutionary algorithms for structural shape and sizing optimisation | Kunakote, T. Bureerat, S. |
2013 |
Mathematical Problems in Engineering (2013), pp. |
||||||||
35. | Comparative performance of meta-heuristic algorithms for mass minimisation of trusses with dynamic constraints | Pholdee, N. Bureerat, S. |
2014 |
Advances in Engineering Software (75), pp. 1-13 |
||||||||
36. | Differential evolution algorithm for solving a nonlinear single pendulum problem | Panagant, N. Bureerat, S. |
2014 |
Advanced Materials Research (931-932), pp. 1129-1133 |
||||||||
37. | Effects of an injection angle of water pipes in an ultrasonic cleaning tank on particle disposal capability | Wongmanee, K. Bureerat, S. |
2014 |
Advanced Materials Research (931-932), pp. 1134-1138 |
||||||||
38. | Hybrid real-code ant colony optimisation for constrained mechanical design | Pholdee, N. Bureerat, S. |
2014 |
International Journal of Systems Science (), pp. |
||||||||
39. | Hybrid real-code population-based incremental learning and approximate gradients for multi-objective truss design | Pholdee, N. Bureerat, S. |
2014 |
Engineering Optimization 8 (46), pp. 1032-1051 |
||||||||
40. | Preface | Bureerat, S. | 2014 |
Advanced Materials Research (931-932), pp. 1 |
||||||||
41. | Solving partial differential equations using a new differential evolution algorithm | Panagant, N. Bureerat, S. |
2014 |
Mathematical Problems in Engineering (2014), pp. |
||||||||
42. | An efficient optimum Latin hypercube sampling technique based on sequencing optimisation using simulated annealing | Pholdee, N. Bureerat, S. |
2015 |
International Journal of Systems Science 10 (46), pp. 1780-1789 |
||||||||
43. | Efficient hybrid evolutionary algorithm for optimization of a strip coiling process | Pholdee, N. Bureerat, S. Kwon, H. Chun, M. |
2015 |
Engineering Optimization 4 (47), pp. 521-532 |
||||||||
44. | Morphing wing structural optimization using opposite-based population-based incremental learning and multigrid ground elements | Sleesongsom, S. Bureerat, S. |
2015 |
Mathematical Problems in Engineering (2015), pp. |
||||||||
45. | Optimization of flatness of strip during coiling process based on evolutionary algorithms | Pholdee, N. Bureerat, S. Kwon, H. Chun, M. |
2015 |
International Journal of Precision Engineering and Manufacturing 7 (16), pp. 1493-1499 |
||||||||
46. | Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms | Pholdee, N. Baek, H. Bureerat, S. |
2015 |
Journal of Mechanical Science and Technology 8 (29), pp. 3427-3436 |
||||||||
47. | Hybrid real-code ant colony optimisation for constrained mechanical design | Pholdee, N. Bureerat, S. |
2016 |
International Journal of Systems Science 2 (47), pp. 474-491 |
||||||||
48. | Optimal Truss Sizing Using an Adaptive Differential Evolution Algorithm | Bureerat, S. Pholdee, N. |
2016 |
Journal of Computing in Civil Engineering 2 (30), pp. |
||||||||
49. | Adaptive sine cosine algorithm integrated with differential evolution for structural damage detection | Bureerat, S. Pholdee, N. |
2017 |
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (10404 10404 LNCS), pp. 71-86 |
||||||||
50. | Estimation of Distribution Algorithm Using Correlation between Binary Elements: A New Binary-Code Metaheuristic | Pholdee, N. Bureerat, S. |
2017 |
Mathematical Problems in Engineering (2017), pp. |
||||||||
51. | Four-bar linkage path generation through self-adaptive population size teaching-learning based optimization | Sleesongsom, S. Bureerat, S. |
2017 |
Knowledge-Based Systems (135), pp. 180-191 |
||||||||
52. | Hybrid real-code population-based incremental learning and differential evolution for many-objective optimisation of an automotive floor-frame | Pholdee, N. Bureerat, S. |
2017 |
International Journal of Vehicle Design 1 (73), pp. 20-53 |
||||||||
53. | Many-objective optimisation of trusses through meta-heuristics | Pholdee, N. Bureerat, S. Jaroenapibal, P. Radpukdee, T. |
2017 |
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (10261 LNCS), pp. 143-152 |
||||||||
54. | Meta-heuristics for engineering optimisation - Applications to metal forming processes | Pholdee, N. Bureerat, S. |
2017 |
Key Engineering Materials (751), pp. 145-150 |
||||||||
55. | Optimal reactive power dispatch problem using a two-archive multi-objective grey wolf optimizer | Artrit, P. Pholdee, N. Bureerat, S. |
2017 |
Expert Systems with Applications (87), pp. 79-89 |
||||||||
56. | Optimal U-shaped baffle square-duct heat exchanger through surrogate-assisted self-adaptive differential evolution with neighbourhood search and weighted exploitation-exploration | Pholdee, N. Bureerat, S. |
2017 |
Applied Thermal Engineering (118), pp. 455-463 |
||||||||
57. | Optimum design of a walking tractor handlebar through many-objective optimisation | Bureerat, S. Pholdee, N. |
2017 |
Advances in Computational Design 4 (2), pp. 273-281 |
||||||||
58. | Optimum radii and heights of U-shaped baffles in a square duct heat exchanger using surrogate-assisted optimization | Pholdee, N. Bureerat, S. |
2017 |
Engineering and Applied Science Research 2 (44), pp. 84-89 |
||||||||
59. | Topology, shape, and size optimization of truss structures using modified teaching-learning based optimization | Bureerat, S. | 2017 |
Advances in Computational Design 4 (2), pp. 313-331 |
||||||||
60. | Two-stage surrogate assisted differential evolution for optimization of a non-circular drawing sequence | Pholdee, N. Bureerat, S. Baek, H. |
2017 |
International Journal of Precision Engineering and Manufacturing 4 (18), pp. 567-573 |
||||||||
61. | A Comparative Study of Eighteen Self-adaptive Metaheuristic Algorithms for Truss Sizing Optimisation | Pholdee, N. Bureerat, S. |
2018 |
KSCE Journal of Civil Engineering 8 (22), pp. 2982-2993 |
||||||||
62. | ADOSH: software with graphic user interface for analysis and design of truss structures | Panagant, N. Bureerat, S. |
2018 |
Asian Journal of Civil Engineering 3 (19), pp. 273-286 |
||||||||
63. | Alternative Constraint Handling Technique for Four-Bar Linkage Path Generation | Sleesongsom, S. Bureerat, S. |
2018 |
IOP Conference Series: Materials Science and Engineering 1 (324), pp. |
||||||||
64. | Development of frame finite element model for truss structures with semi-rigid connections | Panagant, N. Bureerat, S. |
2018 |
Engineering and Applied Science Research 3 (45), pp. 188-195 |
||||||||
65. | Inverse problem based differential evolution for efficient structural health monitoring of trusses | Bureerat, S. Pholdee, N. |
2018 |
Applied Soft Computing Journal (66), pp. 462-472 |
||||||||
66. | Multi-mutation scheme adaptive differential evolution for solving truss sizing optimization | Panagant, N. Bureerat, S. |
2018 |
Asia-Pacific Journal of Science and Technology 3 (23), pp. |
||||||||
67. | Multiobjective adaptive symbiotic organisms search for truss optimization problems | Pholdee, N. Bureerat, S. |
2018 |
Knowledge-Based Systems (161), pp. 398-414 |
||||||||
68. | Multiobjective Simultaneous Topology, Shape and Sizing Optimization of Trusses Using Evolutionary Optimizers | Panagant, N. Pholdee, N. Bureerat, S. |
2018 |
IOP Conference Series: Materials Science and Engineering 1 (370), pp. |
||||||||
69. | Multiobjective trajectory planning of a 6D robot based on multiobjective meta heuristic search | Pholdee, N. Bureerat, S. |
2018 |
ACM International Conference Proceeding Series (), pp. 352-356 |
||||||||
70. | Optimal synthesis of four-bar linkage path generation through evolutionary computation with a novel constraint handling technique | Sleesongsom, S. Bureerat, S. |
2018 |
Computational Intelligence and Neuroscience (2018), pp. |
||||||||
71. | Optimisation of flight dynamic control based on many-objectives meta-heuristic: A comparative study | Bureerat, S. Pholdee, N. Radpukdee, T. |
2018 |
IOP Conference Series: Materials Science and Engineering 1 (370), pp. |
||||||||
72. | Optimization of steering linkage including the effect of McPherson strut front suspension | Sleesongsom, S. Bureerat, S. |
2018 |
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (10941 LNCS), pp. 612-623 |
||||||||
73. | Optimum design of a hand-tractor handlebar through metaheuristic algorithms | Bureerat, S. Pholdee, N. |
2018 |
IOP Conference Series: Materials Science and Engineering 1 (370), pp. |
||||||||
74. | Solving Inverse Kinematics of Robot Manipulators by Means of Meta-Heuristic Optimisation | Bureerat, S. Pholdee, N. |
2018 |
IOP Conference Series: Materials Science and Engineering 1 (370), pp. |
||||||||
75. | Synthesis of multiple cross-section pin fin heat sinks using multiobjective evolutionary algorithms | Bureerat, S. | 2018 |
International Journal of Heat and Mass Transfer (118), pp. 462-470 |
||||||||
76. | Topology and Size Optimization of Trusses with Static and Dynamic Bounds by Modified Symbiotic Organisms Search | Bureerat, S. | 2018 |
Journal of Computing in Civil Engineering 2 (32), pp. |
||||||||
77. | Topology optimisation using MPBILs and multi-grid ground element | Sleesongsom, S. Bureerat, S. |
2018 |
Applied Sciences (Switzerland) 2 (8), pp. |
||||||||
78. | Trajectory Planning of a 6D Robot based on Meta Heuristic Algorithms | Pholdee, N. Bureerat, S. Radpukdee, T. |
2018 |
MATEC Web of Conferences (220), pp. |
||||||||
79. | Truss topology, shape and sizing optimization by fully stressed design based on hybrid grey wolf optimization and adaptive differential evolution | Panagant, N. Bureerat, S. |
2018 |
Engineering Optimization 10 (50), pp. 1645-1661 |
||||||||
80. | Vibration suppression of a single-cylinder engine by means of multi-objective evolutionary optimisation | Sleesongsom, S. Bureerat, S. |
2018 |
Sustainability (Switzerland) 6 (10), pp. |
||||||||
81. | Alternative Constraint Handling Technique for Four-Bar Linkage Motion Generation | Sleesongsom, S. Bureerat, S. |
2019 |
IOP Conference Series: Materials Science and Engineering 1 (501), pp. |
||||||||
82. | A new hybrid Harris hawks-Nelder-Mead optimization algorithm for solving design and manufacturing problems | Bureerat, S. Pholdee, N. |
2019 |
Materialpruefung/Materials Testing 8 (61), pp. 735-743 |
||||||||
83. | A novel self-adaptive hybrid multi-objective meta-heuristic for reliability design of trusses with simultaneous topology, shape and sizing optimisation design variables | Panagant, N. Bureerat, S. |
2019 |
Structural and Multidisciplinary Optimization 5 (60), pp. 1937-1955 |
||||||||
84. | Design and Development of a Threading Machine for Tobacco Leaves | Bureerat, S. Laohavanich, J. Chiawchanwattana, C. Yangyuen, S. |
2019 |
ESIT 2018 - 3rd International Conference on Engineering Science and Innovative Technology, Proceedings (), pp. |
||||||||
85. | Multi-objective optimization of a steering linkage using alternative objective functions | Sleesongsom, S. Bureerat, S. |
2019 |
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (11656 LNCS), pp. 47-58 |
||||||||
86. | Self-adaptive MRPBIL-DE for 6D robot multiobjective trajectory planning | Bureerat, S. Pholdee, N. Radpukdee, T. Jaroenapibal, P. |
2019 |
Expert Systems with Applications (136), pp. 133-144 |
||||||||
87. | Simultaneous topology, shape, and size optimization of trusses, taking account of uncertainties using multi-objective evolutionary algorithms | Panagant, N. Pholdee, N. Bureerat, S. |
2019 |
Engineering with Computers 2 (35), pp. 721-740 |
||||||||
88. | Structural optimization using multi-objective modified adaptive symbiotic organisms search | Pholdee, N. Bureerat, S. |
2019 |
Expert Systems with Applications (125), pp. 425-441 |
||||||||
89. | Synthesis of four-bar linkage motion generation using optimization algorithms | Sleesongsom, S. Panagant, N. Bureerat, S. |
2019 |
Advances in Computational Design 3 (4), pp. 197-210 |
||||||||
90. | Topology optimization of truss subjected to static and dynamic constraints by integrating simulated annealing into passing vehicle search algorithms | Bureerat, S. | 2019 |
Engineering with Computers 2 (35), pp. 499-517 |
||||||||
91. | An Approach Combining an Efficient and Global Evolutionary Algorithm with a Gradient-Based Method for Airfoil Design Problems | Bureerat, S. | 2020 |
Smart Science (), pp. |
||||||||
92. | A novel hybrid Harris hawks-simulated annealing algorithm and RBF-based metamodel for design optimization of highway guardrails | Bureerat, S. | 2020 |
Materialpruefung/Materials Testing 3 (62), pp. 251-260 |
||||||||
93. | A novel hybridized metaheuristic technique in enhancing the diagnosis of cross-sectional dent damaged offshore platform members | Pholdee, N. Bureerat, S. |
2020 |
Computational Intelligence 1 (36), pp. 132-150 |
||||||||
94. | Constraint handling technique for four-bar linkage path generation using self-adaptive teaching–learning-based optimization with a diversity archive | Bureerat, S. Sleesongsom, S. |
2020 |
Engineering Optimization (), pp. |
||||||||
95. | Effects of tool coatings on energy consumption in micro-extrusion of aluminum alloy 6063 | Sucharitpwatskul, S. Mahayotsanun, N. Bureerat, S. |
2020 |
Coatings 4 (10), pp. |
||||||||
96. | Multi-objective modified heat transfer search for truss optimization | Pholdee, N. Bureerat, S. |
2020 |
Engineering with Computers (), pp. |
||||||||
97. | Optimum design of an air suspension seat using recent structural optimization techniques | Bureerat, S. | 2020 |
Materialpruefung/Materials Testing 3 (62), pp. 242-250 |
||||||||
98. | Self-adaptive many-objective meta-heuristic based on decomposition for many-objective conceptual design of a fixed wing unmanned aerial vehicle | Panagant, N. Pholdee, N. Bureerat, S. |
2020 |
Aerospace Science and Technology (100), pp. |
||||||||
99. | Surrogate-Assisted Reliability Optimisation of an Aircraft Wing with Static and Dynamic Aeroelastic Constraints | Sleesongsom, S. Panagant, N. Pholdee, N. Bureerat, S. |
2020 |
International Journal of Aeronautical and Space Sciences (), pp. |
||||||||
100. | The Henry gas solubility optimization algorithm for optimum structural design of automobile brake components | Pholdee, N. Bureerat, S. |
2020 |
Materialpruefung/Materials Testing 3 (62), pp. 261-264 |
Title | Authors | Year | Journal title | ||
---|---|---|---|---|---|
1. | Optimal Synthesis of Four-Bar Linkage Path Generation through Evolutionary Computation with a Novel Constraint Handling Technique. | Sleesongsom, S Bureerat, S |
2018 |
Computational intelligence and neuroscience (2018), pp. 5462563 |
Title | Authors | Year | Journal title | Cited count | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
< 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | รวม | ||||||
1. | An artificial neural network for detection of simulated dental caries | Suwadee Kositbowornchai Sanphet Siriteptawee Supattra Plermkamon Sujin Bureerat Danaipong Chetchotsak |
2006 |
INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY 2.0 (1.0), pp. 91.0-96.0 |
9 | 0 | 0 | 0 | 0 | 0 | 9 | |
2. | Performance enhancement of evolutionary search for structural topology optimisation | S Bureerat J Limtragool |
2006 |
FINITE ELEMENTS IN ANALYSIS AND DESIGN 6.0 (42.0), pp. 547.0-566.0 |
51 | 0 | 0 | 0 | 0 | 0 | 51 | |
3. | Topological design of structures using population-based optimization methods | S. Bureerat T. Kunakote |
2006 |
INVERSE PROBLEMS IN SCIENCE AND ENGINEERING 6.0 (14.0), pp. 589.0-607.0 |
8 | 0 | 0 | 0 | 0 | 0 | 8 | |
4. | Geometrical design of plate-fin heat sinks using hybridization of MOEA and RSM | Sungkom Srisompom Sujin Bureerat |
2008 |
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES 2.0 (31.0), pp. 351.0-360.0 |
43 | 0 | 0 | 0 | 0 | 0 | 43 | |
5. | Structural topology optimisation using simulated annealing with multiresolution design variables | Sujin Bureerat Jumlong Limtragool |
2008 |
FINITE ELEMENTS IN ANALYSIS AND DESIGN 12-13 (44.0), pp. 738.0-747.0 |
34 | 0 | 0 | 0 | 0 | 0 | 34 | |
6. | Optimum plate-fin heat sinks by using a multi-objective evolutionary algorithm | S. Bureerat S. Srisomporn |
2010 |
ENGINEERING OPTIMIZATION 4.0 (42.0), pp. 305.0-323.0 |
33 | 0 | 0 | 0 | 0 | 0 | 33 | |
7. | MULTIOBJECTIVE EVOLUTIONARY OPTIMIZATION OF SPLAYED PIN-FIN HEAT SINK | Siwadol Kanyakam Sujin Bureerat |
2011 |
ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS 4.0 (5.0), pp. 553.0-565.0 |
11 | 0 | 0 | 0 | 0 | 0 | 11 | |
8. | Multi-objective topology optimization using evolutionary algorithms | Tawatchai Kunakote Sujin Bureerat |
2011 |
ENGINEERING OPTIMIZATION 5.0 (43.0), pp. 541.0-557.0 |
49 | 0 | 0 | 0 | 0 | 0 | 49 | |
9. | Simultaneous topology, shape and sizing optimisation of a three-dimensional slender truss tower using multiobjective evolutionary algorithms | Norapat Noilublao Sujin Bureerat |
2011 |
COMPUTERS & STRUCTURES 23-24 (89.0), pp. 2531.0-2538.0 |
35 | 0 | 0 | 0 | 0 | 0 | 35 | |
10. | Comparative Performance of Surrogate-Assisted MOEAs for Geometrical Design of Pin-Fin Heat Sinks | Siwadol Kanyakam Sujin Bureerat |
2012 |
JOURNAL OF APPLIED MATHEMATICS (), pp. |
7 | 0 | 0 | 0 | 0 | 0 | 7 | |
11. | Multiobjective Optimization of a Pin-Fin Heat Sink Using Evolutionary Algorithms | Siwadol Kanyakam Sujin Bureerat |
2012 |
JOURNAL OF ELECTRONIC PACKAGING 2.0 (134.0), pp. |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
12. | Multi-stage design of an automotive component | Adulyasak Boonpan Sujin Bureerat |
2012 |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN 1-2 (60.0), pp. 84.0-99.0 |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
13. | Performance enhancement of multiobjective evolutionary optimisers for truss design using an approximate gradient | Nantiwat Pholdee Sujin Bureerat |
2012 |
COMPUTERS & STRUCTURES (106.0), pp. 115.0-124.0 |
24 | 0 | 0 | 0 | 0 | 0 | 24 | |
14. | Aircraft morphing wing design by using partial topology optimization | S. Sleesongsom S. Bureerat K. Tai |
2013 |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION 6.0 (48.0), pp. 1109.0-1128.0 |
15 | 0 | 0 | 0 | 0 | 0 | 15 | |
15. | Antioptimisation of Trusses Using Two-Level Population-Based Incremental Learning | Phinit Tontragunrat Sujin Bureerat |
2013 |
JOURNAL OF APPLIED MATHEMATICS (), pp. |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
16. | Hybridisation of real-code population-based incremental learning and differential evolution for multiobjective design of trusses | Nantiwat Pholdee Sujin Bureerat |
2013 |
INFORMATION SCIENCES (223.0), pp. 136.0-152.0 |
28 | 0 | 0 | 0 | 0 | 0 | 28 | |
17. | New conceptual design of aeroelastic wing structures by multi-objective optimization | S. Sleesongsom S. Bureerat |
2013 |
ENGINEERING OPTIMIZATION 1.0 (45.0), pp. 107.0-122.0 |
11 | 0 | 0 | 0 | 0 | 0 | 11 | |
18. | Simultaneous topology and sizing optimization of a water distribution network using a hybrid multiobjective evolutionary algorithm | Sujin Bureerat Krit Sriworamas |
2013 |
APPLIED SOFT COMPUTING 8.0 (13.0), pp. 3693.0-3702.0 |
11 | 0 | 0 | 0 | 0 | 0 | 11 | |
19. | Simultaneous Topology, Shape, and Sizing Optimisation of Plane Trusses with Adaptive Ground Finite Elements Using MOEAs | Norapat Noilublao Sujin Bureerat |
2013 |
MATHEMATICAL PROBLEMS IN ENGINEERING (), pp. |
12 | 0 | 0 | 0 | 0 | 0 | 12 | |
20. | Surrogate-Assisted Multiobjective Evolutionary Algorithms for Structural Shape and Sizing Optimisation | Tawatchai Kunakote Sujin Bureerat |
2013 |
MATHEMATICAL PROBLEMS IN ENGINEERING (), pp. |
5 | 0 | 0 | 0 | 0 | 0 | 5 | |
21. | Comparative performance of meta-heuristic algorithms for mass minimisation of trusses with dynamic constraints | Nantiwat Pholdee Sujin Bureerat |
2014 |
ADVANCES IN ENGINEERING SOFTWARE (75.0), pp. 1.0-13.0 |
65 | 0 | 0 | 0 | 0 | 0 | 65 | |
22. | Hybrid real-code population-based incremental learning and approximate gradients for multi-objective truss design | Nantiwat Pholdee Sujin Bureerat |
2014 |
ENGINEERING OPTIMIZATION 8.0 (46.0), pp. 1032.0-1051.0 |
15 | 0 | 0 | 0 | 0 | 0 | 15 | |
23. | Solving Partial Differential Equations Using a New Differential Evolution Algorithm | Natee Panagant Sujin Bureerat |
2014 |
MATHEMATICAL PROBLEMS IN ENGINEERING (), pp. |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
24. | An efficient optimum Latin hypercube sampling technique based on sequencing optimisation using simulated annealing | Nantiwat Pholdee Sujin Bureerat |
2015 |
INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE 10.0 (46.0), pp. 1780.0-1789.0 |
29 | 0 | 0 | 0 | 0 | 0 | 29 | |
25. | Efficient hybrid evolutionary algorithm for optimization of a strip coiling process | Nantiwat Pholdee Won-Woong Park Dong-Kyu Kim Yong-Taek Im Sujin Bureerat Hyuck-Cheol Kwon Myung-Sik Chun |
2015 |
ENGINEERING OPTIMIZATION 4.0 (47.0), pp. 521.0-532.0 |
17 | 0 | 0 | 0 | 0 | 0 | 17 | |
26. | Flutter Analysis of Aircraft Wing Using an Alternative Reduced-order Modeling Method | S. Sleesongsom S. Winyangkul S. Bureerat |
2015 |
INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND ENERGY ENGINEERING (PEEE 2015) (), pp. 98.0-101.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
27. | Morphing Wing Structural Optimization Using Opposite-Based Population-Based Incremental Learning and Multigrid Ground Elements | S. Sleesongsom S. Bureerat |
2015 |
MATHEMATICAL PROBLEMS IN ENGINEERING (), pp. |
5 | 0 | 0 | 0 | 0 | 0 | 5 | |
28. | Optimization of Flatness of Strip during Coiling Process based on Evolutionary Algorithms | Nantiwat Pholdee Sujin Bureerat Won-Woong Park Dong-Kyu Kim Yong-Taek Im Hyuck-Cheol Kwon Myung-Sik Chun |
2015 |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING 7.0 (16.0), pp. 1493.0-1499.0 |
15 | 0 | 0 | 0 | 0 | 0 | 15 | |
29. | Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms | Nantiwat Pholdee Hyun Moo Baek Sujin Bureerat Yong-Taek Im |
2015 |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY 8.0 (29.0), pp. 3427.0-3436.0 |
8 | 0 | 0 | 0 | 0 | 0 | 8 | |
30. | Surrogate Assisted Teaching Learning Based Optimisation for Process Design of a Non-circular Drawing Sequence | N. Pholdee S. Bureerat H. M. Baek Y. -T. Im |
2015 |
PROCEEDINGS OF THE 5TH INTERNATIONAL SYMPOSIUM ON KNOWLEDGE ACQUISITION AND MODELING (80.0), pp. 193.0-196.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
31. | An Improved Teaching-Learning Based Optimization for Optimization of Flatness of a Strip During a Coiling Process | Sujin Bureerat Nantiwat Pholdee Won-Woong Park Dong-Kyu Kim |
2016 |
MULTI-DISCIPLINARY TRENDS IN ARTIFICIAL INTELLIGENCE, (MIWAI 2016) (10053.0), pp. 12.0-23.0 |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
32. | Examination of three meta-heuristic algorithms for optimal design of planar steel frames | Ghanshyam G. Tejani Vishwesh H. Bhensdadia Sujin Bureerat |
2016 |
ADVANCES IN COMPUTATIONAL DESIGN 1.0 (1.0), pp. 79.0-86.0 |
19 | 0 | 0 | 0 | 0 | 0 | 19 | |
33. | Hybrid real-code ant colony optimisation for constrained mechanical design | Nantiwat Pholdee Sujin Bureerat |
2016 |
INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE 2.0 (47.0), pp. 474.0-491.0 |
16 | 0 | 0 | 0 | 0 | 0 | 16 | |
34. | Hybrid TLBO and BFGS for structural health monitoring optimisation problems | Nantiwat Pholdee Sujin Bureerat |
2016 |
PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON MECHANICAL ENGINEERING AND MATERIAL SCIENCE (93.0), pp. 199.0-204.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
35. | Multiobjective optimization of a steering linkage | S. Sleesongsom S. Bureerat |
2016 |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY 8.0 (30.0), pp. 3681.0-3691.0 |
12 | 0 | 0 | 0 | 0 | 0 | 12 | |
36. | Optimal Truss Sizing Using an Adaptive Differential Evolution Algorithm | Sujin Bureerat Nantiwat Pholdee |
2016 |
JOURNAL OF COMPUTING IN CIVIL ENGINEERING 2.0 (30.0), pp. |
25 | 0 | 0 | 0 | 0 | 0 | 25 | |
37. | Structural health monitoring through meta-heuristics - comparative performance study | Nantiwat Pholdee Sujin Bureerat |
2016 |
ADVANCES IN COMPUTATIONAL DESIGN 4.0 (1.0), pp. 315.0-327.0 |
8 | 0 | 0 | 0 | 0 | 0 | 8 | |
38. | Adaptive Sine Cosine Algorithm Integrated with Differential Evolution for Structural Damage Detection | Sujin Bureerat Nantiwat Pholdee |
2017 |
COMPUTATIONAL SCIENCE AND ITS APPLICATIONS - ICCSA 2017, PT I (10404.0), pp. 71.0-86.0 |
10 | 0 | 0 | 0 | 0 | 0 | 10 | |
39. | Estimation of Distribution Algorithm Using Correlation between Binary Elements: A New Binary-Code Metaheuristic | Nantiwat Pholdee Sujin Bureerat |
2017 |
MATHEMATICAL PROBLEMS IN ENGINEERING (2017.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
40. | Four-bar linkage path generation through self-adaptive population size teaching-learning based optimization | S. Sleesongsom S. Bureerat |
2017 |
KNOWLEDGE-BASED SYSTEMS (135.0), pp. 180.0-191.0 |
26 | 0 | 0 | 0 | 0 | 0 | 26 | |
41. | Hybrid real-code population-based incremental learning and differential evolution for many-objective optimisation of an automotive floor-frame | Nantiwat Pholdee Sujin Bureerat Ali Riza Yildiz |
2017 |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN 1-3 (73.0), pp. 20.0-53.0 |
91 | 0 | 0 | 0 | 0 | 0 | 91 | |
42. | Many-Objective Optimisation of Trusses Through Meta-Heuristics | Nantiwat Pholdee Sujin Bureerat Papot Jaroenapibal Thana Radpukdee |
2017 |
ADVANCES IN NEURAL NETWORKS, PT I (10261.0), pp. 143.0-152.0 |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
43. | Optimal reactive power dispatch problem using a two-archive multi-objective grey wolf optimizer | Kasem Nuaekaew Pramin Artrit Nantiwat Pholdee Sujin Bureerat |
2017 |
EXPERT SYSTEMS WITH APPLICATIONS (87.0), pp. 79.0-89.0 |
30 | 0 | 0 | 0 | 0 | 0 | 30 | |
44. | Optimal U-shaped baffle square-duct heat exchanger through surrogate-assisted self-adaptive differential evolution with neighbourhood search and weighted exploitation-exploration | Kittinan Wansaseub Nantiwat Pholdee Sujin Bureerat |
2017 |
APPLIED THERMAL ENGINEERING (118.0), pp. 455.0-463.0 |
10 | 0 | 0 | 0 | 0 | 0 | 10 | |
45. | Optimum design of a walking tractor handlebar through many-objective optimisation | Apichit Mahachai Sujin Bureerat Nantiwat Pholdee |
2017 |
ADVANCES IN COMPUTATIONAL DESIGN 4.0 (2.0), pp. 273.0-281.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
46. | Topology, shape, and size optimization of truss structures using modified teaching-learning based optimization | Ghanshyam G. Tejani Vimal J. Saysani Vivek K. Patel Sujin Bureerat |
2017 |
ADVANCES IN COMPUTATIONAL DESIGN 4.0 (2.0), pp. 313.0-331.0 |
4 | 0 | 0 | 0 | 0 | 0 | 4 | |
47. | Two-Stage Surrogate Assisted Differential Evolution for Optimization of a Non-Circular Drawing Sequence | Nantiwat Pholdee Sujin Bureerat Hyun Moo Baek Yong-Taek Im |
2017 |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING 4.0 (18.0), pp. 567.0-573.0 |
7 | 0 | 0 | 0 | 0 | 0 | 7 | |
48. | A Comparative Study of Eighteen Self-adaptive Metaheuristic Algorithms for Truss Sizing Optimisation | Nantiwat Pholdee Sujin Bureerat |
2018 |
KSCE JOURNAL OF CIVIL ENGINEERING 8.0 (22.0), pp. 2982.0-2993.0 |
3 | 0 | 0 | 0 | 0 | 0 | 3 | |
49. | Alternative Constraint Handling Technique for Four-Bar Linkage Path Generation | S. Sleesongsom S. Bureerat |
2018 |
2017 5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING (324.0), pp. |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
50. | Design and Development of a Threading Machine for Tobacco Leaves | Ranaporn Senasutham Sujin Bureerat Juckamas Laohavanich Cherdpong Chiawchanwattana Suphan Yangyuen |
2018 |
2018 THIRD INTERNATIONAL CONFERENCE ON ENGINEERING SCIENCE AND INNOVATIVE TECHNOLOGY (ESIT) (), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
51. | Inverse problem based differential evolution for efficient structural health monitoring of trusses | Sujin Bureerat Nantiwat Pholdee |
2018 |
APPLIED SOFT COMPUTING (66.0), pp. 462.0-472.0 |
17 | 0 | 0 | 0 | 0 | 0 | 17 | |
52. | Multiobjective adaptive symbiotic organisms search for truss optimization problems | Ghanshyam G. Tejani Nantiwat Pholdee Sujin Bureerat Doddy Prayogo |
2018 |
KNOWLEDGE-BASED SYSTEMS (161.0), pp. 398.0-414.0 |
15 | 0 | 0 | 0 | 0 | 0 | 15 | |
53. | Multiobjective Simultaneous Topology, Shape and Sizing Optimization of Trusses Using Evolutionary Optimizers | Teerapol Techasen Kittinan Wansasueb Natee Panagant Nantiwat Pholdee Sujin Bureerat |
2018 |
INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17) (370.0), pp. |
2 | 0 | 0 | 0 | 0 | 0 | 2 | |
54. | Multiobjective Trajectory Planning of a 6D Robot based on Multiobjective Meta Heuristic Search | Nantiwat Pholdee Sujin Bureerat |
2018 |
PROCEEDINGS OF 2018 VII INTERNATIONAL CONFERENCE ON NETWORK, COMMUNICATION AND COMPUTING (ICNCC 2018) (), pp. 352.0-356.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
55. | Optimal Synthesis of Four-Bar Linkage Path Generation through Evolutionary Computation with a Novel Constraint Handling Technique | Suwin Sleesongsom Sujin Bureerat |
2018 |
COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE (), pp. |
4 | 0 | 0 | 0 | 0 | 0 | 4 | |
56. | Optimisation of flight dynamic control based on many-objectives meta-heuristic: a comparative study | Sujin Bureerat Nantiwat Pholdee Thana Radpukdee |
2018 |
INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17) (370.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
57. | Optimum design of a hand-tractor handlebar through metaheuristic algorithms | Apichit Mahachai Sujin Bureerat Nantiwat Pholdee |
2018 |
INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17) (370.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
58. | Solving Inverse Kinematics of Robot Manipulators by Means of Meta-Heuristic Optimisation | Kritsada Wichapong Sujin Bureerat Nantiwat Pholdee |
2018 |
INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17) (370.0), pp. |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
59. | Synthesis of multiple cross-section pin fin heat sinks using multiobjective evolutionary algorithms | Sanchai Ramphueiphad Sujin Bureerat |
2018 |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (118.0), pp. 462.0-470.0 |
7 | 0 | 0 | 0 | 0 | 0 | 7 | |
60. | Topology and Size Optimization of Trusses with Static and Dynamic Bounds by Modified Symbiotic Organisms Search | Ghanshyam G. Tejani Vimal J. Savsani Sujin Bureerat Vivek K. Patel |
2018 |
JOURNAL OF COMPUTING IN CIVIL ENGINEERING 2.0 (32.0), pp. |
17 | 0 | 0 | 0 | 0 | 0 | 17 | |
61. | Topology Optimisation Using MPBILs and Multi-Grid Ground Element | Suwin Sleesongsom Sujin Bureerat |
2018 |
APPLIED SCIENCES-BASEL 2.0 (8.0), pp. |
7 | 0 | 0 | 0 | 0 | 0 | 7 | |
62. | Truss topology, shape and sizing optimization by fully stressed design based on hybrid grey wolf optimization and adaptive differential evolution | Natee Panagant Sujin Bureerat |
2018 |
ENGINEERING OPTIMIZATION 10.0 (50.0), pp. 1645.0-1661.0 |
12 | 0 | 0 | 0 | 0 | 0 | 12 | |
63. | Vibration Suppression of a Single-Cylinder Engine by Means of Multi-objective Evolutionary Optimisation | Suwin Sleesongsom Sujin Bureerat |
2018 |
SUSTAINABILITY 6.0 (10.0), pp. |
4 | 0 | 0 | 0 | 0 | 0 | 4 | |
64. | Alternative Constraint Handling Technique for Four-Bar Linkage Motion Generation | S. Sleesongsom S. Bureerat |
2019 |
9TH THAI SOCIETY OF MECHANICAL ENGINEERS, INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (TSME-ICOME 2018) (501.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
65. | A new hybrid Harris hawks-Nelder-Mead optimization algorithm for solving design and manufacturing problems | Ali Riza Yildrz Betul Sultan Yildiz Sadiq M. Sait Sujin Bureerat Nantiwai Pholdee |
2019 |
MATERIALS TESTING 8.0 (61.0), pp. 735.0-743.0 |
11 | 0 | 0 | 0 | 0 | 0 | 11 | |
66. | A novel self-adaptive hybrid multi-objective meta-heuristic for reliability design of trusses with simultaneous topology, shape and sizing optimisation design variables | Natee Panagant Sujin Bureerat Kang Tai |
2019 |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION 5.0 (60.0), pp. 1937.0-1955.0 |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
67. | Self-adaptive MRPBIL-DE for 6D robot multiobjective trajectory planning | Sujin Bureerat Nantiwat Pholdee Thana Radpukdee Papot Jaroenapibal |
2019 |
EXPERT SYSTEMS WITH APPLICATIONS (136.0), pp. 133.0-144.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
68. | Simultaneous topology, shape, and size optimization of trusses, taking account of uncertainties using multi-objective evolutionary algorithms | Teerapol Techasen Kittinan Wansasueb Natee Panagant Nantiwat Pholdee Sujin Bureerat |
2019 |
ENGINEERING WITH COMPUTERS 2.0 (35.0), pp. 721.0-740.0 |
5 | 0 | 0 | 0 | 0 | 0 | 5 | |
69. | Structural optimization using multi-objective modified adaptive symbiotic organisms search | Ghanshyam G. Tejani Nantiwat Pholdee Sujin Bureerat Doddy Prayogo Amir H. Gandomi |
2019 |
EXPERT SYSTEMS WITH APPLICATIONS (125.0), pp. 425.0-441.0 |
14 | 0 | 0 | 0 | 0 | 0 | 14 | |
70. | Synthesis of four-bar linkage motion generation using optimization algorithms | VVisanu Phukaokaew Suwin Sleesongsom Natee Panagant Sujin Bureerat |
2019 |
ADVANCES IN COMPUTATIONAL DESIGN 3.0 (4.0), pp. 197.0-210.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
71. | Topology optimization of truss subjected to static and dynamic constraints by integrating simulated annealing into passing vehicle search algorithms | Ghanshyam G. Tejani Vimal J. Savsani Sujin Bureerat Vivek K. Patel Poonam Savsani |
2019 |
ENGINEERING WITH COMPUTERS 2.0 (35.0), pp. 499.0-517.0 |
6 | 0 | 0 | 0 | 0 | 0 | 6 | |
72. | An Approach Combining an Efficient and Global Evolutionary Algorithm with a Gradient-Based Method for Airfoil Design Problems | Atthaphon Ariyarit Masahiro Kanazaki Sujin Bureerat |
2020 |
SMART SCIENCE (), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
73. | A novel hybrid Harris hawks-simulated annealing algorithm and RBF-based metamodel for design optimization of highway guardrails | Dies Kurtulus Ali Riza Yildiz Sadiq M. Sait Sujin Bureerat Khon Kaen |
2020 |
MATERIALS TESTING 3.0 (62.0), pp. 251.0-260.0 |
3 | 0 | 0 | 0 | 0 | 0 | 3 | |
74. | A novel hybridized metaheuristic technique in enhancing the diagnosis of cross-sectional dent damaged offshore platform members | Wonsiri Punurai Md Samdani Azad Nantiwat Pholdee Sujin Bureerat Chana Sinsabvarodom |
2020 |
COMPUTATIONAL INTELLIGENCE 1.0 (36.0), pp. 132.0-150.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
75. | Butterfly optimization algorithm for optimum shape design of automobile suspension components | Betul Sultan Yildiz Ali Riza Yildiz Emre Isa Albak Hammoudi Abderazek Sadiq M. Sait Sujin Bureerat |
2020 |
MATERIALS TESTING 4.0 (62.0), pp. 365.0-370.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
76. | Constraint handling technique for four-bar linkage path generation using self-adaptive teaching-learning-based optimization with a diversity archive | Sujin Bureerat Suwin Sleesongsom |
2020 |
ENGINEERING OPTIMIZATION (), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
77. | Multi-objective modified heat transfer search for truss optimization | Sumit Kumar Ghanshyam G. Tejani Nantiwat Pholdee Sujin Bureerat |
2020 |
ENGINEERING WITH COMPUTERS (), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
78. | Optimum design of an air suspension seat using recent structural optimization techniques | Ayhan Balkan Ali Riza Yildiz Sadiq M. Sait Sujin Bureerat |
2020 |
MATERIALS TESTING 3.0 (62.0), pp. 242.0-250.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
79. | Self-adaptive many-objective meta-heuristic based on decomposition for many-objective conceptual design of a fixed wing unmanned aerial vehicle | Pakin Champasak Natee Panagant Nantiwat Pholdee Sujin Bureerat Ali Riza Yildiz |
2020 |
AEROSPACE SCIENCE AND TECHNOLOGY (100.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
80. | The Henry gas solubility optimization algorithm for optimum structural design of automobile brake components | Betul Sultan Yildiz Ali Riza Yildiz Nantiwat Pholdee Sujin Bureerat Sadiq M. Sait Vivek Patel |
2020 |
MATERIALS TESTING 3.0 (62.0), pp. 261.0-264.0 |
3 | 0 | 0 | 0 | 0 | 0 | 3 |
Title | Authors | Year | Journal title | ||
---|---|---|---|---|---|
1. | Comparison of Signal Processing Techniques for Fault Detection in Helical Spur Gears | Setthapong Hamcumpai Khon Kaen Ubonratana DAM Sujin Bureerat Nawapak Eua-Anant Thailand 40002 |
2007 |
KKU ENGINEERING JOURNAL 1 (34), pp. 59-72 |
|
2. | Effect of bearing sleeve lead-in chamfer, and parallelism on tolerance ring installation | Piriyakorn Jirawattanakasem Sujin Bureerat |
2010 |
KKU ENGINEERING JOURNAL 1 (37), pp. 65-70 |
|
3. | Prediction of Head Stack Assembly Gram Load Using Finite Element Analysis | Khemakorn Chaloemsri Sujin Bureerat Thailand Khon Kaen University |
2010 |
KKU ENGINEERING JOURNAL 1 (37), pp. 55-63 |
|
4. | Material Identification of a Bridge Carrier Using Finite Element Analysis | Nantiwat Pholdee Sujin Bureerat |
2010 |
KKU ENGINEERING JOURNAL 2 (37), pp. 93-99 |
|
5. | Evaluation of Head Stack Assembly Pitch Static Attitude by Means of Finite Element Analysis: A Case Study of 2.5-in Hard Disk Drives | Rattaphom Khlaiaksorn Sujin Bureerat Thailand Khon Kaen University |
2010 |
KKU ENGINEERING JOURNAL 1 (37), pp. 47-53 |
ชื่อโครงการ | Authors | ประเภทโครงการ | ปีงบประมาณ | ทุนวิจับ |
---|