| Title | Author | Year | SCOPUS | PUBMED | ISI | TCI | |
|---|---|---|---|---|---|---|---|
| 1. | Threshing unit losses prediction for thai axial flow rice combine harvester | Somchai Chuan-Udom Winit Chinsuwan |
2009 | ||||
| 2. | Effects of operating factors of an axial flow rice combine harvester on grain breakage | Chuan-Udom, S. Chinsuwan, W. |
2011 | ||||
| 3. | Effects of threshing unit feature on threshing unit losses for thai axial flow rice combine harvesters | Somchai Chuan-udom Winit Chinsuwan |
2012 | ||||
| 4. | Operating factors of Thai threshers affecting corn shelling losses | Chuan-Udom, S. | 2013 | ||||
| 5. | Effect of temperature and heating duration of drying on quality of low amylose rice | Jutarop Yardthaisong Somchai Chuan-Udom |
2014 | ||||
| 6. | Effects of Guide Vane Inclination Patterns on Threshing Losses and Power Requirement | Doungpueng, K. Chuan-Udom, S. |
2014 | ||||
| 7. | Behaviour of grain separation in thai transverse axial threshing units for chainat 1 rice varity | Somchai Chuan-Udom | 2015 | ||||
| 8. | Design factors affecting losses and power consumption of an axial flow corn shelling unit | Chuan-Udom, S. Saengprachatanarug, K. |
2016 | ||||
| 9. | Electrical energy consumption and energy conservation of rice mills in the Northeastern of Thailand | Anuwat Pachanawan Somchai Chuan-Udom Khwantri Saengprachatanarug Seree Wongpichet |
2017 | ||||
| 10. | Effect of metering device arrangement to discharge consistency of sugarcane billet planter | Saengprachatanarug, K. Kamwilaisak, K. Kasemsiri, P. |
2018 | ||||
| 11. | Effect of waxy material and measurement position of a sugarcane stalk on the rapid determination of Pol value using a portable near infrared instrument | Chuan-Udom, S. Saengprachatanarug, K. Wongpichet, S. , |
2018 | ||||
| 12. | Factors of operation affecting performance of a short axial-flow soybean threshing unit | Wuttiphol Chansrakoo Somchai Chuan-Udom |
2018 | ||||
| 13. | Peg-tooth spacing and guide vane inclination of a Thai combine harvester affecting harvesting losses | Chuan-Udom, S. Saengprachatanarug, K. |
2018 | ||||
| 14. | Country-appropriate operating cost estimation scheme based on curve fitting for rice combine harvester | Doungpueng, K. Chuan-Udom, S. |
2019 | ||||
| 15. | Factors Affecting Shelling Efficiency and Grain Breakage of a Small Maize Shelling Unit | Chuan-Udom, S. Doungpueng, K. |
2019 | ||||
| 16. | Lost times of harvesting processes of the Thai combine harvesters | Doungpueng, K. Chuan-Udom, S. |
2019 | ||||
| 17. | Effects of Compressed Pressure and Speed of the Tandem Mill of Sugar Cane Milling on Milling Performance | Srichaipanya, W. Chuan-Udom, S. |
2020 | ||||
| 18. | Optimization of milling performance of a sugar mill | Chuan-Udom, S. | 2020 | ||||
| 19. | Preparation of activated carbon fromDipterocarpus alatusfruit and its application for methylene blue adsorption | Chantakorn Patawat Ketsara Silakate Somchai Chuan-Udom Nontipa Supanchaiyamat Andrew J. Hunt Yuvarat Ngernyen |
2020 | ||||
| 20. | Selection of proper combine harvesters to field conditions by an effective field capacity prediction model | Doungpueng, K. Saengprachatanarug, K. Posom, J. Chuan-Udom, S. |
2020 | ||||
| 21. | Development of drums for an axial flow maize shelling unit | Anuwat Pachanawan Khunnithi Doungpueng Somchai Chuan-Udom |
2021 | ||||
| 22. | Effects of disc peg drum parameters on maize shelling performance of an axial flow shelling unit | Doungpueng, K. Chuan-Udom, S. |
2021 | ||||
| 23. | Factors affecting a Twin Roller Groundnut Sheller on Shelling Performance | Pachanawan, A. Chuan-Udom, S. |
2021 | ||||
| 24. | Factors affecting sunflower threshing performance of a small axial flow threshing unit | Chuan-Udom, S. | 2022 | ||||
| 25. | Behavior and model of grain separation for a small axial flow maize shelling unit | Srison, W. Doungpueng, K. Muenkaew, P. Chuan-Udom, S. |
2023 | Count | 24 | 0 | 9 | 1 |
| Title | Authors | Year | Publication name | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | Total | ||||||
| 1. | Threshing unit losses prediction for thai axial flow rice combine harvester | Chuan-Udom, S. Chinsuwan, W. |
2009 |
AMA, Agricultural Mechanization in Asia, Africa and Latin America 1 (40), pp. 50-54 |
||||||||
| 2. | Effects of operating factors of an axial flow rice combine harvester on grain breakage | Chuan-Udom, S. Chinsuwan, W. |
2011 |
Songklanakarin Journal of Science and Technology 2 (33), pp. 221-225 |
||||||||
| 3. | Effects of threshing unit feature on threshing unit losses for thai axial flow rice combine harvesters | Chuan-Udom, S. Chinsuwan, W. |
2012 |
AMA, Agricultural Mechanization in Asia, Africa and Latin America 4 (43), pp. 66-71 |
||||||||
| 4. | Operating factors of Thai threshers affecting corn shelling losses | Chuan-Udom, S. | 2013 |
Songklanakarin Journal of Science and Technology 1 (35), pp. 63-67 |
||||||||
| 5. | Effects of Guide Vane Inclination Patterns on Threshing Losses and Power Requirement | Doungpueng, K. Chuan-Udom, S. |
2014 |
Kasetsart Journal - Natural Science 2 (48), pp. 313-322 |
||||||||
| 6. | Behaviour of grain separation in thai transverse axial threshing units for chainat 1 rice varity | Chuan-Udom, S. | 2015 |
Engineering Journal 5 (19), pp. 155-165 |
||||||||
| 7. | Design factors affecting losses and power consumption of an axial flow corn shelling unit | Chuan-Udom, S. Saengprachatanarug, K. |
2016 |
Songklanakarin Journal of Science and Technology 5 (38), pp. 591-598 |
||||||||
| 8. | Electrical energy consumption and energy conservation of rice mills in the Northeastern of Thailand | Chuan-Udom, S. Saengprachatanarug, K. Wongpichet, S. |
2017 |
Engineering Journal 4 (21), pp. 73-82 |
||||||||
| 9. | Effect of metering device arrangement to discharge consistency of sugarcane billet planter | Saengprachatanarug, K. Kamwilaisak, K. Kasemsiri, P. |
2018 |
Engineering in Agriculture, Environment and Food 3 (11), pp. 139-144 |
||||||||
| 10. | Effect of waxy material and measurement position of a sugarcane stalk on the rapid determination of Pol value using a portable near infrared instrument | Chuan-Udom, S. Saengprachatanarug, K. Wongpichet, S. , |
2018 |
Journal of Near Infrared Spectroscopy 5 (26), pp. 287-296 |
||||||||
| 11. | Factors of operation affecting performance of a short axial-flow soybean threshing unit | Chuan-Udom, S. | 2018 |
Engineering Journal 4 (22), pp. 109-120 |
||||||||
| 12. | Peg-tooth spacing and guide vane inclination of a Thai combine harvester affecting harvesting losses | Chuan-Udom, S. Saengprachatanarug, K. |
2018 |
Engineering and Applied Science Research 2 (45), pp. 107-111 |
||||||||
| 13. | Country-appropriate operating cost estimation scheme based on curve fitting for rice combine harvester | Doungpueng, K. Chuan-Udom, S. |
2019 |
IOP Conference Series: Earth and Environmental Science 1 (301), pp. |
||||||||
| 14. | Factors Affecting Shelling Efficiency and Grain Breakage of a Small Maize Shelling Unit | Chuan-Udom, S. Doungpueng, K. |
2019 |
IOP Conference Series: Earth and Environmental Science 1 (301), pp. |
||||||||
| 15. | Lost times of harvesting processes of the Thai combine harvesters | Doungpueng, K. Chuan-Udom, S. |
2019 |
IOP Conference Series: Earth and Environmental Science 1 (301), pp. |
||||||||
| 16. | Effects of Compressed Pressure and Speed of the Tandem Mill of Sugar Cane Milling on Milling Performance | Srichaipanya, W. Chuan-Udom, S. |
2020 |
Current Applied Science and Technology 2 (20), pp. 249-258 |
||||||||
| 17. | Optimization of milling performance of a sugar mill | Chuan-Udom, S. | 2020 |
E3S Web of Conferences (187), pp. |
||||||||
| 18. | Preparation of activated carbon fromDipterocarpus alatusfruit and its application for methylene blue adsorption | Chuan-Udom, S. Supanchaiyamat, N. Hunt, A.J. Ngernyen, Y. |
2020 |
RSC Advances 36 (10), pp. 21082-21091 |
||||||||
| 19. | Selection of proper combine harvesters to field conditions by an effective field capacity prediction model | Doungpueng, K. Saengprachatanarug, K. Posom, J. Chuan-Udom, S. |
2020 |
International Journal of Agricultural and Biological Engineering 4 (13), pp. 125-134 |
||||||||
| 20. | Development of drums for an axial flow maize shelling unit | Doungpueng, K. Chuan-Udom, S. |
2021 |
Engineering Journal 2 (25), pp. 59-70 |
||||||||
| 21. | Effects of disc peg drum parameters on maize shelling performance of an axial flow shelling unit | Doungpueng, K. Chuan-Udom, S. |
2021 |
International Journal of Agricultural Technology 1 (17), pp. 257-276 |
||||||||
| 22. | Factors affecting a Twin Roller Groundnut Sheller on Shelling Performance | Pachanawan, A. Chuan-Udom, S. |
2021 |
International Journal of Agricultural Technology 6 (17), pp. 2375-2384 |
||||||||
| 23. | Factors affecting sunflower threshing performance of a small axial flow threshing unit | Chuan-Udom, S. | 2022 |
Engineering and Applied Science Research 5 (49), pp. 720-730 |
||||||||
| 24. | Behavior and model of grain separation for a small axial flow maize shelling unit | Srison, W. Doungpueng, K. Muenkaew, P. Chuan-Udom, S. |
2023 |
Engineering and Applied Science Research 6 (50), pp. 538-547 |
||||||||
| Title | Authors | Year | Journal title |
|---|
| Title | Authors | Year | Journal title | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | Total | ||||||
| 1. | Threshing Unit Losses Prediction for Thai Axial Flow Rice Combine Harvester | Somchai Chuan-Udom Winit Chinsuwan |
2009 |
AMA-AGRICULTURAL MECHANIZATION IN ASIA AFRICA AND LATIN AMERICA 1.0 (40.0), pp. 50.0-54.0 |
4 | 0 | 0 | 0 | 0 | 0 | 4 | |
| 2. | Effects of Threshing Unit Feature on Threshing Unit Losses for Thai Axial Flow Rice Combine Harvesters | Somchai Chuan-udom Winit Chinsuwan |
2012 |
AMA-AGRICULTURAL MECHANIZATION IN ASIA AFRICA AND LATIN AMERICA 4.0 (43.0), pp. 66.0-71.0 |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
| 3. | Behaviour of Grain Separation in Thai Transverse Axial Threshing Units for Chainat 1 Rice Varity | Somchai Chuan-Udom | 2015 |
ENGINEERING JOURNAL-THAILAND 5.0 (19.0), pp. 155.0-165.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 4. | Electrical Energy Consumption and Energy Conservation of Rice Mills in the Northeastern of Thailand | Anuwat Pachanawan Somchai Chuan-Udom Khwantri Saengprachatanarug Seree Wongpichet |
2017 |
ENGINEERING JOURNAL-THAILAND 4.0 (21.0), pp. 73.0-82.0 |
6 | 0 | 0 | 0 | 0 | 0 | 6 | |
| 5. | Effect of waxy material and measurement position of a sugarcane stalk on the rapid determination of Pol value using a portable near infrared instrument | Kanvisit Maraphum Somchai Chuan-Udom Khwantri Saengprachatanarug Seree Wongpichet Jetsada Posom Arthit Phuphaphud Eizo Taira |
2018 |
JOURNAL OF NEAR INFRARED SPECTROSCOPY 5.0 (26.0), pp. 287.0-296.0 |
20 | 0 | 0 | 0 | 0 | 0 | 20 | |
| 6. | Factors of Operation Affecting Performance of a Short Axial-flow Soybean Threshing Unit | Wuttiphol Chansrakoo Somchai Chuan-Udom |
2018 |
ENGINEERING JOURNAL-THAILAND 4.0 (22.0), pp. 109.0-120.0 |
4 | 0 | 0 | 0 | 0 | 0 | 4 | |
| 7. | Preparation of activated carbon fromDipterocarpus alatusfruit and its application for methylene blue adsorption | Chantakorn Patawat Ketsara Silakate Somchai Chuan-Udom Nontipa Supanchaiyamat Andrew J. Hunt Yuvarat Ngernyen |
2020 |
RSC ADVANCES 36.0 (10.0), pp. 21082.0-21091.0 |
8 | 0 | 0 | 0 | 0 | 0 | 8 | |
| 8. | Selection of proper combine harvesters to field conditions by an effective field capacity prediction model | Khunnithi Doungpueng Khwantri Saengprachatanarug Jetsada Posom Somchai Chuan-Udom |
2020 |
INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING 4.0 (13.0), pp. 125.0-134.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 9. | Development of Drums for an Axial Flow Maize Shelling Unit | Anuwat Pachanawan Khunnithi Doungpueng Somchai Chuan-Udom |
2021 |
ENGINEERING JOURNAL-THAILAND 2.0 (25.0), pp. 59.0-70.0 |
1 | 0 | 0 | 0 | 0 | 0 | 1 | |
| Title | Authors | Year | Journal title | ||
|---|---|---|---|---|---|
| 1. | Effect of temperature and heating duration of drying on quality of low amylose rice | Jutarop Yardthaisong Somchai Chuan-Udom |
2014 |
KKU ENGINEERING JOURNAL 1 (41), pp. 91-98 |
| Title | Authors | NRIIS type | Year | NRIIS Scholarship | ||
|---|---|---|---|---|---|---|
| 1. | การพัฒนาเครื่องเก็บเกี่ยวข้าวโพดเลี้ยงสัตว์แบบติดตั้งกับรถแทรคเตอร์ ระยะที่ 1: การศึกษาและพัฒนาชุดกะเทาะข้าวโพด v |
รศ.ดร. สมชาย ชวนอุดม |
โครงการ | 2557 | ทุนงบประมาณแผ่นดินประจำปี 2557 | |
| 2. | การพัฒนาโปรแกรมประมาณการความคุ้มค่าในการใช้งานเครื่องเกี่ยวนวดข้าวไทย |
รศ.ดร. สมชาย ชวนอุดม อ.ดร. วาธิส ลีลาภัทร |
โครงการ | 2561 | ทุนงบประมาณแผ่นดินประจำปี 2561 (งบบูรณาการวิจัยและนวัตกรรม) |