| Title | Author | Year | SCOPUS | PUBMED | ISI | TCI | |
|---|---|---|---|---|---|---|---|
| 1. | Segregation of controlled and failed heads using an integration of noise amplitudes in a limited range of harmonic frequency | A. Siritaratiwat K. Tangchaichit R. Ung-arunyawee D. Tongsomporn K. Chooruang R. Sivaratana |
2007 | ||||
| 2. | Synthetic dynamic test of base line popping noise in recording heads | Siritaratiwat, A. Tangchaichit, K. Ung-arunyawee, R. |
2007 | ||||
| 3. | Continuous production of lime juice by vacuum freeze drying | Theansuwan, W. Triratanasirichai, K. Tangchaichit, K. |
2008 | ||||
| 4. | Comparison proximate analysis and heating value between cassava rhizome and perennial wood | Jongpluempiti, J. Tangchaichit, K. |
2012 | ||||
| 5. | Experimental investigation of using cassava rhizome to replace firewood for Dan Kwian pottery firing, Thailand | Jongpluempiti, J. Tangchaichit, K. |
2012 | ||||
| 6. | Feasibility assessment of using cassava rhizomes for firing pottery in Dan Kwian, Thailand | Jongpluempiti, J. Tangchaichit, K. |
2012 | ||||
| 7. | A method to reduce calculation time for a study of a damper plate in a high speed hard disk drive simulation | Suriyawanakul, J. Tangchaichit, K. |
2013 | ||||
| 8. | CFD investigation of damper plate effect on air flow in high speed rotation hard disk drive by using K-E with a partial model | Suriyawanakul, J. Tangchaichit, K. |
2013 | ||||
| 9. | Stress analysis of the adhesive used in a hard disk drive bearing assembly using finite element model | Vengsungnle, P. Tangchaichit, K. |
2013 | ||||
| 10. | Design and development the pressure chamber of the continuous belt air-blast freezer in freezing shrimp process | Phuekpan, K. Tangchaichit, K. |
2014 | ||||
| 11. | An experimental investigation of concentrated slop combustion characteristics in cyclone furnace | Suphaopich Panpokha Tanakorn Wongwuttanasatian Kiatfa Tangchaichit |
2018 | ||||
| 12. | Comparison of airflow-uniformity in different ceiling-diffuser designs with various concentric circles in shrimp freezer using CFD | Tangchaichit, K. Suriyawanakul, J. |
2018 | ||||
| 13. | Computational Fluid Dynamics to Develop a Micro Particle Cleaning Process using Turbulent Air Flows in the Hard Disk Drive Industry | Nualpun Jai-Ngam Sirorat Pattanapairoj Kiatfa Tangchaichit |
2018 | ||||
| 14. | Decreasing turbulent helium flow in hard disk drive | Supitcha Tawinprai Jarupol Suriyawanakul Kiatfa Tangchaichit |
2018 | ||||
| 15. | Designing a hard disk drive kinetic air particle detachment system using finite element analysis | Nualpun Jai-Nagam Kiatfa Tangchaichit |
2018 | ||||
| 16. | Simulation of Airflow inside a Computer Hard Disk Drive to Develop an Impinging Air Jet Particle Detachment System for Cleaning Head Stack Assemblies | Tangchaichit, K. | 2018 | ||||
| 17. | Simulation of concentrated slop combustion in cyclone furnace using Computational Fluid Dynamics (CFD) | Tangchaichit, K. Wongwuttanasatian, T. |
2018 | ||||
| 18. | The relation of carbon non-uniformity and deflect coil tilt angle in diamond-like carbon coating process by mathematical model | Tangchaichit, K. | 2018 | ||||
| 19. | The successful of finite element to invent particle cleaning system by air jet in hard disk drive | Tangchaichit, K. | 2018 | ||||
| 20. | Wind speed and power characteristics of Kalasin province, Thailand | Supachai Polnumtiang Kiatfa Tangchaichit |
2018 | ||||
| 21. | Computational Design of a Cyclone Furnace for Concentrated Slop Combustion: A Potential Method of Converting Waste to Energy in the Alcohol Industry | Tanakorn Wongwuttanasatian Kiatfa Tangchaichit Manita Phasomprayoch Suphaopich Panpokha |
2019 | ||||
| 22. | Computational fluid dynamics to develop a micro particle cleaning process using turbulent air flows in the hard disk drive industry | Pattanapairoj, S. Tangchaichit, K. |
2019 | ||||
| 23. | Wind energy resource assessment for Mukdahan, Thailand | Supachai Polnumtiang Kiatfa Tangchaichit |
2021 | ||||
| 24. | Identification of Flexural Modulus and Poisson’s Ratio of Fresh Femoral Bone Based on a Finite Element Model | Nabudda, K. Suriyawanakul, J. Tangchaichit, K. Pholdee, N. Kosuwon, W. Wisanuyotin, T. |
2022 | ||||
| 25. | Study of Brake Pad Shim Modification to Improve Stability Against High Frequency Squeal Noise by Finite Element Analysis | Khuntiptong, A. Tangchaichit, K. Polnumtiang, S. Ladbut, N. Wansasueb, K. |
2022 | ||||
| 26. | Wind energy resource assessment for Mukdahan, Thailand | Polnumtiang, S. Tangchaichit, K. |
2022 | ||||
| 27. | A modelling approach for evaluating the wind resource and power generation using a high-resolution grid at selected regions in the northeast of Thailand | Tawinprai, S. Polnumtiang, S. Suksomprom, P. Waewsak, J. |
2023 | ||||
| 28. | Possibility of Locking Compression Plate as the Treatment of External Fixation for Femoral Bone Based on Finite Element Method | Nabudda, K. Suriyawanakul, J. Tangchaichit, K. Kosuwon, W. Sukhonthamarn, K. Pannucharoenwong, N. |
2023 | ||||
| 29. | OPTIMIZED IMPACT RESISTANCE IN SEALED PLASTIC CUP LIDS THROUGH INTEGRATED FINITE ELEMENT ANALYSIS AND DROP TESTS | Janlasad, N. Tangchaichit, K. |
2024 | Count | 27 | 0 | 12 | 0 |
| Title | Authors | Year | Publication name | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | รวม | ||||||
| 1. | Segregation of controlled and failed heads using an integration of noise amplitudes in a limited range of harmonic frequency | Siritaratiwat, A. Tangchaichit, K. Ung-arunyawee, R. Chooruang, K. |
2007 |
Journal of Magnetism and Magnetic Materials 2 SPEC. ISS. (316), pp. e145-e148 |
||||||||
| 2. | Synthetic dynamic test of base line popping noise in recording heads | Siritaratiwat, A. Tangchaichit, K. Ung-arunyawee, R. |
2007 |
Journal of Magnetism and Magnetic Materials 2 SPEC. ISS. (316), pp. 192-194 |
||||||||
| 3. | Continuous production of lime juice by vacuum freeze drying | Theansuwan, W. Triratanasirichai, K. Tangchaichit, K. |
2008 |
American Journal of Applied Sciences 8 (5), pp. 959-962 |
||||||||
| 4. | Comparison proximate analysis and heating value between cassava rhizome and perennial wood | Jongpluempiti, J. Tangchaichit, K. |
2012 |
Advanced Materials Research (415-417), pp. 1693-1696 |
||||||||
| 5. | Experimental investigation of using cassava rhizome to replace firewood for Dan Kwian pottery firing, Thailand | Jongpluempiti, J. Tangchaichit, K. |
2012 |
Advanced Science Letters 1 (15), pp. 39-42 |
||||||||
| 6. | Feasibility assessment of using cassava rhizomes for firing pottery in Dan Kwian, Thailand | Jongpluempiti, J. Tangchaichit, K. |
2012 |
Applied Mechanics and Materials (148-149), pp. 1158-1163 |
||||||||
| 7. | A method to reduce calculation time for a study of a damper plate in a high speed hard disk drive simulation | Suriyawanakul, J. Tangchaichit, K. |
2013 |
Applied Mechanics and Materials (423-426), pp. 1940-1943 |
||||||||
| 8. | CFD investigation of damper plate effect on air flow in high speed rotation hard disk drive by using K-E with a partial model | Suriyawanakul, J. Tangchaichit, K. |
2013 |
Applied Mechanics and Materials (392), pp. 85-89 |
||||||||
| 9. | Stress analysis of the adhesive used in a hard disk drive bearing assembly using finite element model | Vengsungnle, P. Tangchaichit, K. |
2013 |
Advanced Materials Research (605-607), pp. 405-410 |
||||||||
| 10. | Design and development the pressure chamber of the continuous belt air-blast freezer in freezing shrimp process | Phuekpan, K. Tangchaichit, K. |
2014 |
Advanced Materials Research (931-932), pp. 1163-1167 |
||||||||
| 11. | An experimental investigation of concentrated slop combustion characteristics in cyclone furnace | Wongwuttanasatian, T. Tangchaichit, K. |
2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 12. | Comparison of airflow-uniformity in different ceiling-diffuser designs with various concentric circles in shrimp freezer using CFD | Tangchaichit, K. Suriyawanakul, J. |
2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 13. | Decreasing turbulent helium flow in hard disk drive | Suriyawanakul, J. Tangchaichit, K. |
2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 14. | Designing a hard disk drive kinetic air particle detachment system using finite element analysis | Tangchaichit, K. | 2018 |
Engineering Journal 3 (22), pp. 65-81 |
||||||||
| 15. | Simulation of Airflow inside a Computer Hard Disk Drive to Develop an Impinging Air Jet Particle Detachment System for Cleaning Head Stack Assemblies | Tangchaichit, K. | 2018 |
IEEE Transactions on Magnetics 6 (54), pp. |
||||||||
| 16. | Simulation of concentrated slop combustion in cyclone furnace using Computational Fluid Dynamics (CFD) | Tangchaichit, K. Wongwuttanasatian, T. |
2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 17. | The relation of carbon non-uniformity and deflect coil tilt angle in diamond-like carbon coating process by mathematical model | Tangchaichit, K. | 2018 |
Asia-Pacific Journal of Science and Technology 1 (23), pp. |
||||||||
| 18. | The successful of finite element to invent particle cleaning system by air jet in hard disk drive | Tangchaichit, K. | 2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 19. | Wind speed and power characteristics of Kalasin province, Thailand | Tangchaichit, K. | 2018 |
IOP Conference Series: Earth and Environmental Science 1 (150), pp. |
||||||||
| 20. | Computational Design of a Cyclone Furnace for Concentrated Slop Combustion: A Potential Method of Converting Waste to Energy in the Alcohol Industry | Wongwuttanasatian, T. Tangchaichit, K. |
2019 |
Waste and Biomass Valorization 11 (10), pp. 3447-3456 |
||||||||
| 21. | Computational fluid dynamics to develop a micro particle cleaning process using turbulent air flows in the hard disk drive industry | Pattanapairoj, S. Tangchaichit, K. |
2019 |
ECTI-CON 2018 - 15th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (), pp. 588-591 |
||||||||
| 22. | Identification of Flexural Modulus and Poisson’s Ratio of Fresh Femoral Bone Based on a Finite Element Model | Nabudda, K. Suriyawanakul, J. Tangchaichit, K. Pholdee, N. Kosuwon, W. Wisanuyotin, T. |
2022 |
International journal of online and biomedical engineering 4 (18), pp. 94-105 |
||||||||
| 23. | Study of Brake Pad Shim Modification to Improve Stability Against High Frequency Squeal Noise by Finite Element Analysis | Khuntiptong, A. Tangchaichit, K. Polnumtiang, S. Ladbut, N. Wansasueb, K. |
2022 |
Engineering Journal 9 (26), pp. 25-34 |
||||||||
| 24. | Wind energy resource assessment for Mukdahan, Thailand | Polnumtiang, S. Tangchaichit, K. |
2022 |
International Journal of Green Energy 2 (19), pp. 137-148 |
||||||||
| 25. | A modelling approach for evaluating the wind resource and power generation using a high-resolution grid at selected regions in the northeast of Thailand | Tawinprai, S. Polnumtiang, S. Suksomprom, P. Waewsak, J. |
2023 |
Modeling Earth Systems and Environment 3 (9), pp. 3229-3241 |
||||||||
| 26. | Possibility of Locking Compression Plate as the Treatment of External Fixation for Femoral Bone Based on Finite Element Method | Nabudda, K. Suriyawanakul, J. Tangchaichit, K. Kosuwon, W. Sukhonthamarn, K. Pannucharoenwong, N. |
2023 |
International Journal of Mechanical Engineering and Robotics Research 5 (12), pp. 290-296 |
||||||||
| 27. | OPTIMIZED IMPACT RESISTANCE IN SEALED PLASTIC CUP LIDS THROUGH INTEGRATED FINITE ELEMENT ANALYSIS AND DROP TESTS | Janlasad, N. Tangchaichit, K. |
2024 |
EUREKA, Physics and Engineering 5 (2024), pp. 136-151 |
||||||||
| Title | Authors | Year | Journal title |
|---|
| Title | Authors | Year | Journal title | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | รวม | ||||||
| 1. | Segregation of controlled and failed heads using an integration of noise amplitudes in a limited range of harmonic frequency | A. Siritaratiwat K. Tangchaichit R. Ung-arunyawee D. Tongsomporn K. Chooruang R. Sivaratana |
2007 |
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 2.0 (316.0), pp. E145-E148 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 2. | Synthetic dynamic test of base line popping noise in recording heads | A. Siritaratiwat O. Phochai K. Tangchaichit R. Ung-arunyawee R. Sivaratana P. W. Nutter |
2007 |
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 2.0 (316.0), pp. 192.0-194.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 3. | An experimental investigation of concentrated slop combustion characteristics in cyclone furnace | Suphaopich Panpokha Tanakorn Wongwuttanasatian Kiatfa Tangchaichit |
2018 |
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 4. | Comparison of airflow-uniformity in different ceiling-diffuser designs with various concentric circles in shrimp freezer using CFD | Chanya Uraijaree Kiatfa Tangchaichit Jarupol Suriyawanakul |
2018 |
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 5. | Computational Fluid Dynamics to Develop a Micro Particle Cleaning Process using Turbulent Air Flows in the Hard Disk Drive Industry | Nualpun Jai-Ngam Sirorat Pattanapairoj Kiatfa Tangchaichit |
2018 |
2018 15TH INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING/ELECTRONICS, COMPUTER, TELECOMMUNICATIONS AND INFORMATION TECHNOLOGY (ECTI-CON) (), pp. 588.0-591.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 6. | Decreasing turbulent helium flow in hard disk drive | Supitcha Tawinprai Jarupol Suriyawanakul Kiatfa Tangchaichit |
2018 |
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 7. | Designing a Hard Disk Drive Kinetic Air Particle Detachment System Using Finite Element Analysis | Nualpun Jai-Nagam Kiatfa Tangchaichit |
2018 |
ENGINEERING JOURNAL-THAILAND 3.0 (22.0), pp. 65.0-81.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 8. | Simulation of Airflow inside a Computer Hard Disk Drive to Develop an Impinging Air Jet Particle Detachment System for Cleaning Head Stack Assemblies | Nualpun Jai-Ngam Kiatfa Tangchaichit |
2018 |
IEEE TRANSACTIONS ON MAGNETICS 6.0 (54.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 9. | Simulation of concentrated slop combustion in cyclone furnace using Computational Fluid Dynamics (CFD) | Manita Phasomprayoch Kiatfa Tangchaichit Tanakorn Wongwuttanasatian |
2018 |
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 10. | Wind speed and power characteristics of Kalasin province, Thailand | Supachai Polnumtiang Kiatfa Tangchaichit |
2018 |
8TH INTERNATIONAL CONFERENCE ON FUTURE ENVIRONMENT AND ENERGY (ICFEE 2018) (150.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 11. | Computational Design of a Cyclone Furnace for Concentrated Slop Combustion: A Potential Method of Converting Waste to Energy in the Alcohol Industry | Tanakorn Wongwuttanasatian Kiatfa Tangchaichit Manita Phasomprayoch Suphaopich Panpokha |
2019 |
WASTE AND BIOMASS VALORIZATION 11.0 (10.0), pp. 3447.0-3456.0 |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 12. | Wind energy resource assessment for Mukdahan, Thailand | Supachai Polnumtiang Kiatfa Tangchaichit |
2021 |
INTERNATIONAL JOURNAL OF GREEN ENERGY (), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| Title | Authors | Year | Journal title |
|---|
| ชื่อโครงการ | Authors | ประเภทโครงการ | ปีงบประมาณ | ทุนวิจับ |
|---|