| Title | Author | Year | SCOPUS | PUBMED | ISI | TCI | |
|---|---|---|---|---|---|---|---|
| 1. | A method to reduce calculation time for a study of a damper plate in a high speed hard disk drive simulation | Suriyawanakul, J. Tangchaichit, K. |
2013 | ||||
| 2. | CFD investigation of damper plate effect on air flow in high speed rotation hard disk drive by using K-E with a partial model | Suriyawanakul, J. Tangchaichit, K. |
2013 | ||||
| 3. | Comparison of airflow-uniformity in different ceiling-diffuser designs with various concentric circles in shrimp freezer using CFD | Tangchaichit, K. Suriyawanakul, J. |
2018 | ||||
| 4. | Decreasing turbulent helium flow in hard disk drive | Supitcha Tawinprai Jarupol Suriyawanakul Kiatfa Tangchaichit |
2018 | ||||
| 5. | The 3d finite element analysis of stress distribution in implant supported single crown with different abutment designs | Sae-Lee, D. Suriyawanakul, J. |
2018 | ||||
| 6. | Identification of Flexural Modulus and Poisson’s Ratio of Fresh Femoral Bone Based on a Finite Element Model | Nabudda, K. Suriyawanakul, J. Tangchaichit, K. Pholdee, N. Kosuwon, W. Wisanuyotin, T. |
2022 | ||||
| 7. | Effect of gingival height of a titanium base on the biomechanical behavior of 2-piece custom implant abutments: A 3-dimensional nonlinear finite element study | Poovarodom, P Rungsiyakull, C Suriyawanakul, J Li, Q Sasaki, K Yoda, N Rungsiyakull, P |
2023 | ||||
| 8. | Effect of implant placement depth on bone remodeling on implant-supported single zirconia abutment crown: A 3D finite element study | Poovarodom, P Rungsiyakull, C Suriyawanakul, J Li, Q Sasaki, K Yoda, N Rungsiyakull, P |
2023 | ||||
| 9. | Possibility of Locking Compression Plate as the Treatment of External Fixation for Femoral Bone Based on Finite Element Method | Nabudda, K. Suriyawanakul, J. Tangchaichit, K. Kosuwon, W. Sukhonthamarn, K. Pannucharoenwong, N. |
2023 | ||||
| 10. | Triclocarban-contaminated wastewater treatment by innovative hybrid moving entrapped bead activated sludge reactor (HyMER): Continuous performance and computational dynamic simulation analysis | Taweetanawanit, P Therdkiattikul, N Sonsuphab, K Sucharitpwatskul, S Suriyawanakul, J Radpukdee, T Ratpukdi, T Siripattanakul-Ratpukdi, S |
2023 | ||||
| 11. | Effect of customized abutment taper configuration on bone remodeling and peri-implant tissue around implant-supported single crown: A 3D nonlinear finite element study | Poovarodom, P. Rungsiyakull, C. Suriyawanakul, J. Li, Q. |
2024 | ||||
| 12. | Multi-objective optimization of custom implant abutment design for enhanced bone remodeling in single-crown implants using 3D finite element analysis. | Poovarodom, P Rungsiyakull, C Suriyawanakul, J Li, Q Sasaki, K Yoda, N Rungsiyakull, P |
2024 | ||||
| 13. | Biomechanical Comparison of Cobalt-Chromium and PEEK Frameworks in Distal-Extension Removable Partial Dentures Using Finite Element Analysis | Jantaban, N. Suriyawanakul, J. Sae-Lee, D. Rungsiyakull, P. Poovarodom, P. |
2025 | ||||
| 14. | Mechanical behavior of hybrid custom implant abutments with various crown materials: a 3D finite element analysis. | Poovarodom, P. Moura, G.F. Rizzante, F.A.P. Rungsiyakull, C. Suriyawanakul, J. Rungsiyakull, P. |
2025 | Count | 13 | 5 | 2 | 0 |
| Title | Authors | Year | Publication name | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | รวม | ||||||
| 1. | A method to reduce calculation time for a study of a damper plate in a high speed hard disk drive simulation | Suriyawanakul, J. Tangchaichit, K. |
2013 |
Applied Mechanics and Materials (423-426), pp. 1940-1943 |
||||||||
| 2. | CFD investigation of damper plate effect on air flow in high speed rotation hard disk drive by using K-E with a partial model | Suriyawanakul, J. Tangchaichit, K. |
2013 |
Applied Mechanics and Materials (392), pp. 85-89 |
||||||||
| 3. | Comparison of airflow-uniformity in different ceiling-diffuser designs with various concentric circles in shrimp freezer using CFD | Tangchaichit, K. Suriyawanakul, J. |
2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 4. | Decreasing turbulent helium flow in hard disk drive | Suriyawanakul, J. Tangchaichit, K. |
2018 |
IOP Conference Series: Earth and Environmental Science 1 (113), pp. |
||||||||
| 5. | The 3d finite element analysis of stress distribution in implant supported single crown with different abutment designs | Sae-Lee, D. Suriyawanakul, J. |
2018 |
Engineering and Applied Science Research 3 (45), pp. 240-250 |
||||||||
| 6. | Identification of Flexural Modulus and Poisson’s Ratio of Fresh Femoral Bone Based on a Finite Element Model | Nabudda, K. Suriyawanakul, J. Tangchaichit, K. Pholdee, N. Kosuwon, W. Wisanuyotin, T. |
2022 |
International journal of online and biomedical engineering 4 (18), pp. 94-105 |
||||||||
| 7. | Effect of gingival height of a titanium base on the biomechanical behavior of 2-piece custom implant abutments: A 3-dimensional nonlinear finite element study | Poovarodom, P. Rungsiyakull, C. Suriyawanakul, J. Li, Q. |
2023 |
Journal of Prosthetic Dentistry 3 (130), pp. 380.e1-380.e9 |
||||||||
| 8. | Effect of implant placement depth on bone remodeling on implant-supported single zirconia abutment crown: A 3D finite element study | Poovarodom, P. Rungsiyakull, C. Suriyawanakul, J. Li, Q. Sasaki, K. Yoda, N. Rungsiyakull, P. |
2023 |
Journal of Prosthodontic Research 2 (67), pp. 278-287 |
||||||||
| 9. | Possibility of Locking Compression Plate as the Treatment of External Fixation for Femoral Bone Based on Finite Element Method | Nabudda, K. Suriyawanakul, J. Tangchaichit, K. Kosuwon, W. Sukhonthamarn, K. Pannucharoenwong, N. |
2023 |
International Journal of Mechanical Engineering and Robotics Research 5 (12), pp. 290-296 |
||||||||
| 10. | Triclocarban-contaminated wastewater treatment by innovative hybrid moving entrapped bead activated sludge reactor (HyMER): Continuous performance and computational dynamic simulation analysis | Taweetanawanit, P. Therdkiattikul, N. Sonsuphab, K. Sucharitpwatskul, S. Suriyawanakul, J. Radpukdee, T. |
2023 |
Science of the Total Environment (879), pp. |
||||||||
| 11. | Effect of customized abutment taper configuration on bone remodeling and peri-implant tissue around implant-supported single crown: A 3D nonlinear finite element study | Poovarodom, P. Rungsiyakull, C. Suriyawanakul, J. Li, Q. |
2024 |
Journal of Prosthodontics 8 (33), pp. 815-823 |
||||||||
| 12. | Biomechanical Comparison of Cobalt-Chromium and PEEK Frameworks in Distal-Extension Removable Partial Dentures Using Finite Element Analysis | Jantaban, N. Suriyawanakul, J. Sae-Lee, D. Rungsiyakull, P. Poovarodom, P. |
2025 |
Journal of International Dental and Medical Research 2 (18), pp. 599-609 |
||||||||
| 13. | Mechanical behavior of hybrid custom implant abutments with various crown materials: a 3D finite element analysis | Poovarodom, P. Moura, G.F. Rizzante, F.A.P. Rungsiyakull, C. Suriyawanakul, J. Rungsiyakull, P. |
2025 |
BMC Oral Health 1 (25), pp. |
||||||||
| Title | Authors | Year | Journal title | ||
|---|---|---|---|---|---|
| 1. | Triclocarban-contaminated wastewater treatment by innovative hybrid moving entrapped bead activated sludge reactor (HyMER): Continuous performance and computational dynamic simulation analysis. | Taweetanawanit, P Therdkiattikul, N Sonsuphab, K Sucharitpwatskul, S Suriyawanakul, J Radpukdee, T Ratpukdi, T Siripattanakul-Ratpukdi, S |
2023 |
The Science of the total environment (879), pp. 163037 |
|
| 2. | Effect of implant placement depth on bone remodeling on implant-supported single zirconia abutment crown: A 3D finite element study. | Poovarodom, P Rungsiyakull, C Suriyawanakul, J Li, Q Sasaki, K Yoda, N Rungsiyakull, P |
2023 |
Journal of prosthodontic research 2 (67), pp. 278-287 |
|
| 3. | Effect of gingival height of a titanium base on the biomechanical behavior of 2-piece custom implant abutments: A 3-dimensional nonlinear finite element study. | Poovarodom, P Rungsiyakull, C Suriyawanakul, J Li, Q Sasaki, K Yoda, N Rungsiyakull, P |
2023 |
The Journal of prosthetic dentistry 3 (130), pp. 380.e1-380.e9 |
|
| 4. | Multi-objective optimization of custom implant abutment design for enhanced bone remodeling in single-crown implants using 3D finite element analysis. | Poovarodom, P Rungsiyakull, C Suriyawanakul, J Li, Q Sasaki, K Yoda, N Rungsiyakull, P |
2024 |
Scientific reports 1 (14), pp. 15867 |
|
| 5. | Mechanical behavior of hybrid custom implant abutments with various crown materials: a 3D finite element analysis. | Poovarodom, P Moura, GF Rizzante, FAP Rungsiyakull, C Suriyawanakul, J Rungsiyakull, P |
2025 |
BMC oral health 1 (25), pp. 1106 |
| Title | Authors | Year | Journal title | Cited count | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| < 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | รวม | ||||||
| 1. | Comparison of airflow-uniformity in different ceiling-diffuser designs with various concentric circles in shrimp freezer using CFD | Chanya Uraijaree Kiatfa Tangchaichit Jarupol Suriyawanakul |
2018 |
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| 2. | Decreasing turbulent helium flow in hard disk drive | Supitcha Tawinprai Jarupol Suriyawanakul Kiatfa Tangchaichit |
2018 |
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESOURCES AND ENVIRONMENT ENGINEERING (113.0), pp. |
0 | 0 | 0 | 0 | 0 | 0 | 0 | |
| Title | Authors | Year | Journal title |
|---|
| ชื่อโครงการ | Authors | ประเภทโครงการ | ปีงบประมาณ | ทุนวิจับ |
|---|